2010年總目次

環保安全法規環境下塑料助劑的應對策略………………………………………… 包紅燕,孫紹剛,李潤琳,王 磊,王朝暉,陳 宇(5-1)

高分子材料先進制造的微積分思想 ……………………… 楊衛民(7-1)

PVC管道行業要走技術創新的路 ………………………… 張玉川(11-1)

中國塑料管道行業現狀及發展趨勢 王占杰(1-1)………………………

聚芳醚酮的表面修飾及其在生物醫用領域的應用……………………………………………………孫 輝,孫 杰,徐英凱,許國志(1-6)

聚羥基烷酸酯——一種應用廣泛的生物降解聚合物……………………臺立民,姜 瀅,馮思靜(2-1)………………………………………

高介電常數高分子復合材料的研究進展…………………………………………………………………………周文英,左 晶,任文娥(2-6)

多層共擠出塑料薄膜機頭的結構改進與發展…………………………………………………………………… 苗立榮,張玉霞,薛 平(2-11)

ABS/碳納米管納米復合材料的研究進展 ………………………………………………………………………周 亮,李冬梅,楊 迎(3-1)

無鹵阻燃含磷環氧樹脂的研究進展…………………………………………………………………… 葉龍健,錢立軍,佟芍朋,許國志(3-11)

聚合物擠出口模設計的數值研究進展 ………… 陳晉南,彭 濤(3-19)

中國塑料工業(2009) ……………………………………… 廖正品(4-1)

中國擠塑聚苯乙烯(XPS)泡沫塑料行業現狀與發展趨勢…………………………………………………………………………王 勇(4-12)

中國聚烯烴工業2009年發展狀況及“十二·五”展望 … 劉 健(4-17)

膨脹型阻燃劑阻燃聚丙烯復合材料相容性改進的研究進展………………………………………………………………劉定福,梁基照(5-6)

聚吡咯/無機粒子納米復合材料的研究進展 ……………………………………………… 段國晨,齊暑華,吳新明,齊海元,張 翼(5-14)

中國塑料管道新產品和新型塑料管道系統 ……………… 林少全(6-1)

聚氯乙烯/木粉復合材料研究進展 ……… 吳 波,齊暑華,王 鑫(6-6)

微注射成型與微分注射成型技術………………………………………………………………………… 張攀攀,王 建,謝鵬程,楊衛民(6-13)

聚磷酸銨為主的膨脹型阻燃劑的協效研究進展……………………………………………………… 屈紅強 ,武偉紅,武紅娟,徐建中(7-7)

國外線形酚醛樹脂研究進展……………………………………………………… 理莎莎,齊暑華,劉乃亮,盧文書,李夢韜,許燈順(7-13)

反應器共混多相耐沖擊聚丙烯結構和性能研究進展 …… 呂立新(8-1)

我國農膜行業現狀的分析及其發展對策(2010年) ……… 周大綱(8-9)

氣固相法生產氯化聚氯乙烯樹脂的研究進展……………………………………………… 張向京,郭欣欣,劉玉敏,趙 颯,胡永琪(8-13)

淀粉基復合泡沫塑料制備工藝研究進展 ………… 陳小健,臺立民(9-1)

殼聚糖智能水凝膠研究進展 …………… 舒 靜,李小靜,趙大飆(9-6)

氫氧化鎂協同阻燃劑研究進展…………………………………………………………………………… 王 娟,李志偉,李小紅,張治軍(9-11)

膨脹阻燃體系概述…………………………………………………………………………… 陳曉平,張 勝,楊偉強,崔 正,陳小隨(10-1)

無溶劑復合技術的特點及相關設備結構分析…………………………………………………………呂 玲,高 德,許文才,左光申(10-9)

硅氧烷基聚合物陶瓷化研究進展 …… 魏方明,王庭慰,邵海彬(10-17)

我國新材料輕型輸送帶的發展現狀與趨勢 ……………… 許乾慰(11-6)

聚丙烯/納米二氧化硅復合材料研究進展 …… 趙祎程,姚軍燕(11-11)

磺化聚苯乙烯反應工藝研究進展…………………………………………………………………… 周 蕊,魏榮卿,劉曉寧,陳新營(11-15)

有序介孔聚合物的研究進展……………………………………………………………………………劉攀博,焦 劍,鄒 亮,許祥東(12-1)

塑料在“輕量化”汽車中的應用及發展趨勢 ……………… 劉西文(12-8)

超臨界CO2發泡微孔塑料的研究進展 …………………………………………………………… 程 博,齊暑華,吳 波,曹 鵬(12-14)

介孔SiO2的有機化修飾及其對環氧樹脂拉伸性能的影響…………………………………………………… 焦 劍,劉攀博,鄒 亮(1-11)

星形結構SAN樹脂的合成及其對ABS樹脂性能的影響………………………………… 陳 敏,曹春雷,王丹丹,肖凌寒,張會軒(1-17)

PC/PET共混合金相容性的研究 ……………… 薛繼榮,寧 平(1-23)

硅橡膠/氯化聚乙烯共混體系的制備及性能研究 …………………………………………………………… 程青民,羅世凱,丁國芳 (1-28)

OMM T對PE-HD/PA 6合金的結晶性能和相容性的影響 ………………………………………………………………孫 莉,項賽飛(1-33)

環氧樹脂/稻殼SiO2納米復合材料的熱性能及拉伸性能研究 ……………………………………… 劉繼延,劉學清,張遠方,甘燕梅(1-38)

羥甲基丙烯酰胺熔融接枝聚丙烯親水性的研究………………………………………………………馮 杰,馮紹華,相益信,馮 廠(1-43)

PBT/ABS合金增容體系的研究 …………………………………………………………… 田 冶,段春來,周 霆,李榮群,辛敏琦(1-47)

炭黑在聚酰胺6中的超分散性研究………………………………………………………… 宋云華,范 闖,王成忠,徐德勝,李 革(2-21)

滑石粉、碳酸鈣填充聚丙烯復合材料等溫結晶行為的研究 ……………………………………………………鄒 燕,紀彬彬,溫變英(2-26)

可見光下發綠光的聚苯乙烯/Cd Te復合材料的制備及光學性能研究……………………………… 王 文,林美娟,黃麗梅,蘇棉棉(2-30)

環氧樹脂對PA 6/EPDM-g-MA H共混體系性能的影響 ………………………………… 江耀貴,楊 其,黃亞江,孫 靜,程小蓮(2-35)

含磷有機硅氧烷改性環氧樹脂酚醛固化體系性能研究……………………………………………… 王政芳,劉偉區,胡朝輝,馬松琪(2-42)

聚酰胺6/環氧樹脂改性蒙脫土納米復合材料的制備與性能…………………………… 周雪琴,盛仲夷,謝松桂,申屠寶卿,翁志學(2-47)

長玻璃纖維增強PP/m-PA 6復合材料的制備及性能研究……………………………………………方 鯤,吳絲竹,丁雪佳,李 玫(2-52)

原位乳液聚合法制備PVAc/OMM T納米復合材料的性能研究 ………………………………………………劉 玲,曾幸榮,賴學軍(2-57)

PVC/MBS共混物的形態及力學性能 ……………………………………………………… 褚明利,劉 哲,李洪權,陳 明,張會軒(3-25)

L 丙交酯與ε 己內酯共聚物微觀結構與熱力學性能研究 …………………………… 魯 越,熊左春,張勝藍,熊成東,陳棟梁(3-29)

PAG原位增容PP/PA 6共混物的非等溫結晶動力學 …………………………………………………………………… 梁淑君,楊萬泰(3-34)

微波法合成凹凸棒復合丙烯酸 丙烯酰胺高吸水性樹脂的研究………………………………………………… 來水利,陳 峰,韓武軍(3-41)

丙烯腈 苯乙烯 丙烯酸酯共聚物的流變性能 ……………………………………………………… 王艷芳,崔玲玲,徐保良,滕謀勇(3-45)

納米無機粒子選擇性分布與遷移對聚合物共混物形態與性能的影響…………………… 于 杰,胡世軍,郭建兵,張敏敏,秦舒浩(3-49)

用錐形量熱儀研究聚氨酯泡沫的阻燃性能 ……………… 于寶剛(3-55)

聚酰胺6在聚丙烯/微膠囊化多聚磷酸銨中的作用 ……………………………………………………………………… 馬志領,唐慧鵬(3-60)

PP及PP/EPDM共混物室內外老化行為的研究 ………………………………………… 樊鵬鵬,高麗彥,劉小林,楊 其,劉鈺馨(4-21)

αMSAN共聚物的組成對PMMA/αMSAN共混物相容性的影響…………………… 孟 婷,任 亮,張立新,馬曉琳,張明耀(4-27)

玻璃微珠和炭黑對EPDM膠料硫化特性的影響…………………………… 楊立寶,陸曉中,陸慶章,孫曉民(4-30)

官能化接枝共聚物增容PA 6/PS共混物的研究…………………………………………… 譚志勇,王丹丹,穆興文,陳 敏,張會軒(4-34)

不同抗靜電劑對聚丙烯抗靜電性能和力學性能的影響………………………………………………………… 劉 偉,王向東,許國志(4-39)

馬來酸酐改性端羥基乳酸預聚體的合成及性能研究…………………………………………………………… 陳佑寧,張君才,趙 維(4-44)

1,3雙(2噁唑啉)基苯擴鏈聚酰胺6的研究……………………………………………………… 張 乾,萬超瑛,黨曉容,吳科勉(4-49)

聚己內酯/聚氨酯共聚熱致形狀記憶材料的合成與表征 …………………………………………… 陳亞東,彭振博,張慧波,張永春(4-54)

固相縮聚對聚酯切片熱性能和結晶行為的影響…………………………………………………………………陳 允,金 劍,尹翠玉(5-20)

茂金屬線形低密度聚乙烯樹脂的結構與性能………………………………………………………… 李朋朋,梁天珍,樊 潔,楊世元(5-23)

鈉 萘絡合物對聚氯代對二甲苯薄膜的表面改性機理研究……………………………………………………………… 高劉德,劉 劍(5-28)

天然氨基酸作用下丙交酯的開環聚合反應 …… 劉繼延,劉學清(5-34)

聚合物結構對界面張力與相對分子質量關系的影響…………………………………………………………… 吳愛民,孫載堅,吉法祥(5-39)

牙科根管樁釘用纖維/樹脂可塑性復合材料的優化制備研究 ……………………………………… 胡 江,何惠明,劉玉紅,鄭亞萍(5-43)

溫度和封端劑馬來酸酐對聚碳酸亞丙酯黏均相對分子質量的影響……………………… 張光軍,蒙 昊,陳有業 ,汪英杰,王紅霞(5-48)

PP/納米 TiO2復合材料的晶體形貌和非等溫結晶行為…………………………………… 伍玉嬌,何 輝,蒙日亮,劉昌貴,蔡啟軍(5-51)

EPDM交聯對聚酰胺6基復合材料“沙袋結構”演變與性能的影響………………………… 傅李丹,陳 思,王勇杰,孟季鳳,王 旭(6-19)

聚丙烯/海泡石復合材料的等溫結晶行為 ……………………………………………………………… 李曉燕,胡小平,戴亞堂,李少先(6-24)

聚丙烯/四針狀氧化鋅晶須/氧化鎂導熱絕緣復合材料的制備與性能研究 ……………………………………李光吉,童奇勇,馮 暉(6-28)

大規模集成電路封裝用聯苯型環氧樹脂的制備及其結構與性能……………………………………… 楊明山,何 杰,李林楷,肖 強(6-36)

鐵粉含量對聚甲醛/鐵粉復合材料摩擦磨損性能的影響 ……………………………………………… 劉 莉,王 龍,劉 曉,李少香(6-40)………………………

聚苯硫醚/釹鐵硼復合材料力學性能與電磁性能 ………………………………… 王永杰,李 艷,蘆 艾,許 軼,余雪江,王憲忠(6-45)

單體澆鑄聚酰胺6聚醚嵌段共聚物/納米炭黑復合材料的制備及其非

等溫結晶行為的研究 ……… 林 軒,周紅軍,尹國強,曾余平(7-19)

CPVC/ABS/CPE三元共混體系的組成與性能關系研究 ……………………… 馬 軍,袁茂全,牟南翔,胡妹華,王 建,武德珍(7-24)

納米棒狀聚苯胺/席夫堿復合材料的制備及其電性能研究 ……………………………… 段國晨,齊暑華,吳新明,齊海元,張 翼(7-28)

環氧樹脂/三羥甲基丙烷三甲基丙烯酸酯互穿網絡聚合物的微觀結構和

電性能研究 ……………………………………… 段景寬,江平開(7-34)

環保型改性糠醛環氧灌漿材料的制備和性能研究………………………………… 高 南,張亞峰,鄺健政,陳玉放,徐宇亮,周 華(7-41)

熱降解動力學方法研究ABS的降解機理 ………………………………………………………………………楊有財,李榮勛,劉光燁(7-47)

端環氧基硅油改性環氧樹脂性能研究 …………………………………………………… 李宏靜,劉偉區,魏振杰,王政芳,馬松琪(7-51)

多壁碳納米管復合聚碳酸酯/苯乙烯系聚合物復合材料導電性能的研究………………………………………孫 堯,郭朝霞,于 建(8-17)

酚醛樹脂/蒙脫土納米復合材料的制備及其性能研究 ………………………… 吳江濤,齊暑華,李春華,莫軍連,李美玲,尚 磊(8-23)

聚硼硅氧烷阻燃PC/ABS合金的制備與其阻燃性能……………………………………… 宋 健,周文君,呂 群,陳 科,陳友財(8-28)

苯乙烯/γ 甲基丙烯酰氧丙基三甲氧基硅烷乳液共聚動力學研究…………… 趙洪池,吳秀亭,高姍姍,高玲玲,宋智偉,白海英(8-32)

聚合物結晶行為的流變學研究 ……… 閔 敏,戴厚益,蘆 艾(8-37)

聚苯胺 鑭的制備與表征 …………………………………吳 濤(8-41)

膨脹型阻燃劑阻燃環氧樹脂的阻燃性能及其影響因素…………………………………………………………………… 馬志領,盧光玉(8-45)

聚乳酸/蒙脫土納米復合材料的制備及其性能研究 ………………………………………… 沈 斌,劉 亮,林水興,楊 奕,張麗葉(9-17)

PA 6/ABS共混物非等溫結晶行為研究 …………………………………………………… 劉春林,肖葉彬,李 軍,沈 慧,黃仁軍(9-22)

聚丁二酸丁二醇/二甘醇酯的合成研究 ………………………………………………………………肖 峰,王庭慰,丁 培,王景春(9-27)

無溶劑纏繞成型用含磷阻燃環氧樹脂的研究………………………………………………………… 王建宇,陳立新,何瑋奇,孔嬌月(9-31)

不同增容劑對聚酰胺1010/聚丙烯共混物的增容作用研究 ……………………………………………………………… 楊風霞,王雪靜(9-36)

乙烯共聚聚丙烯流延膜樹脂力學與結晶性能研究……………………………………………………………… 王英年,柯?lián)P船,金麗曉(9-41)

一種新型聚丁二酸丁二醇酯類脂肪族生物可降解聚酯的性能……………………………………… 葛 嵐,邵曉叢,陳建文,吳嘉麟(9-46)

炭黑填充PE-HD/EVA/PE-LD導電發泡復合材料的阻溫特性 …………………………… 李繼新,王立巖,李素君,張 木,吳全才(9-49)

流場下不相容聚合物共混物分散相形態的研究進展………………………………………………………… 何郁嵩,黃亞江,李光憲(10-21)

無鹵阻燃高抗沖聚苯乙烯材料阻燃性能的研究…………………………………………………… 林春平,吳大鳴,劉 穎 ,鄭秀婷(10-28)

剪切作用下POE-g-MAH和PP-g-MAH對PA 1010/PP共混物的增容作用 ……………………………… 劉 萍,楊風霞,陶建中(10-33)

載銅蒙脫土對聚氯乙烯阻燃性能的影響 ……… 楊 玲,王勇毅(10-39)

微晶纖維素含量對PE-HD復合材料性能的影響 …………………………………………………………… 李宏林,楊桂生,吳玉程(10-43)

高開口型線形低密度聚乙烯的性能研究…………………………………………………………… 魏福慶,周福斌,許惠芳,李朋朋(10-47)

水懸浮體系中苯乙烯和馬來酸酐接枝聚丙烯改性研究…………………………………………… 祝寶東,王 鑒,董 群,宋 軍(10-50)

鈰離子引發纖維素接枝甲基丙烯酸丁酯吸油材料的制備………………哈麗丹·買買提,阿不利米提,庫爾班江·肉孜,阿里木江(10-55)

流動場下含β成核劑的玻璃纖維增強聚丙烯復合材料結構與性能研究………………………… 張正馳,陳妍慧,李忠明,唐建華(11-20)

大豆分離蛋白的化學改性和增塑研究……………………………………………………………… 胡世明,崔永巖 ,楊振興,趙振倫(11-26)

超支化聚氨酯的合成及表征…………………………………………………………………………… 靳彥嶺,任鵬剛,張政委,李 楊(11-31)

增塑增韌聚丙烯的制備及其性能研究……………………………………………………………… 周中玉,潘泳康,唐頌超,王慶海(11-35)

瓶用聚酯切片結晶性能研究………………………………………………………………… 張 木,陳延明,陳 宏,司春雷,高啟升(11-39)

懸浮法PEB-g-MAN/SAN共混物的熱性能與耐老化性能研究 ………………………… 王 霞,朱勇平,王煉石,蔡彤旻 ,張安強(11-43)

應力誘導引發MAH官能化PE-LD及其對鋁箔/PET復合薄膜層間剝離強度的影響 …………………… 張 玲,張云燦,傅偉寧(11-49)

聚乳酸與高分子彈性體共混體系的研究……………………………………………………………………… 黃 錦,吳文倩,項愛民(11-54)

納米SiC粒子的表面處理對PTFE/納米SiC復合材料的性能影響……………………………………………………顧紅艷,丁蘭英(11-58)

PP/PS/納米插層高嶺土復合材料的制備及性能研究 …………………………………………… 侯桂香,李森林,桑曉明,馬曉林(12-21)

CPVC增韌改性的研究……………………………………………………………………… 柯偉席,王 瀾,韓微微,張 萌,沈傳熙(12-25)

聚乳酸/可反應性納米SiO2復合材料的等溫結晶動力學………………………………………… 郭有鋼,張予東,徐翔民,張普玉(12-30)

POE接枝衣康酸增容PA 6/POE共混物性能及形態研究………………………………………………………………劉喜軍,侯寶慶(12-36)

POSS增強PMMA熱性能和力學性能研究 ……………………………………………………… 楊本宏,李 萌,黃志君,吳 云(12-42)

PP-MAH對PP/漢麻纖維復合材料結構及性能的影響…………………………………… 牛鵬飛,陳建野,衛曉明,王孝軍,楊 杰(12-46)

POM與POM/碳酸鈣復合材料非等溫結晶動力學研究 ……………………… 惠江濤,陳正廣,李云勇,周維燕,周 濤,張愛民(12-52)

PEG/PCL基復合軟段降解型PUF力學與動態力學特性研究 ………………………………… 王艷艷,梁書恩,田春蓉,王建華(12-57)

線形聚丙烯/低密度聚乙烯發泡體系的結晶行為研究 …………………………………… 劉 偉,劉本剛,王向東,許國志,張玉霞(12-63)

加工與應用助 劑塑料與環境標準與測試機械與模具論壇·交流企業訪談ForumReviewMaterialsand PropertiesProcessing and ApplicationAdditivePlasticsand EnvironmentStandard and TestMachinery and M ouldEnterprise Interview

帶筋注塑制品截面充填過程數值模擬………………………………………………………………… 劉永志,趙振峰,馬 蘭,申長雨(1-52)

基于ANSYS的鋼網增強PE-HD力學性能的模擬分析與實驗驗證 …………………… 孫佳楠,陳冰冰,金楊福,高增梁,錢 欣(1-56)

內模填充衣架式機頭內物料停留時間的數值模擬………………………………………… 周文淵,熊傳勝,孟雅新,楊寶紅,王景祿(1-59)

加工工藝對聚乙烯/乙炔炭黑復合材料中炭黑分散性的影響 ………………………………………………… 張文龍,郎丹丹,凌 鈞(1-64)

超臨界二氧化碳擠出發泡聚丙烯研究……………………………………………………… 張玉霞,劉本剛,王向東,李 瑩,許國志(1-69)

抗氧劑對聚乙烯光降解膜結構及性能的影響………………………………………………………… 陳加波,丁永紅,李云峰,朱 威(2-61)

注塑工藝參數對微發泡PP/SiO2納米復合材料發泡行為及力學性能的影響……………………………………………………………………………龔 維,高家誠,何 力,于 杰,鄭 環,何 穎(2-66)

發泡工藝對高發泡PP板材性能的影響 ……… 劉 卉,揣成智(2-73)

聚合物熔體矩形流道擠出脹大的數值模擬 …… 李 勇,鄭建榮(2-78)

納米無機粒子抑制噴繪PVC膜中增塑劑析出的研究 …………………………………………………………楊寶紅,白永平,曹英杰(2-83)

超薄花盆件注射成型工藝研究 ………………… 張 楊,辛 勇(3-64)

雙色電器外殼的注射成型 …… 李冬梅,徐 巖,賈建波,王慎波(3-68)

PVC-g-DMC抗菌聚合物的制備及其在PVC中的應用…………………………………… 葛一蘭,李青山,崔占全,孫忠學,郭 彬(3-72)

不同生產方法糊樹脂復配對PVC增塑糊黏度及穩定性的影響 ………………………… 吉玉碧,徐國敏,張敏敏,胡 智,譚 紅(3-79)

塑料中空吹塑成型用原料、工藝及設備的發展 ……………………………………………………………………………劉 學,張玉霞(3-83)

基于數值模擬的汽車外飾件熔接痕分析及其優化設計…………………………………… 單 志,梅 益,郭建兵,李揚俊,秦舒浩(4-58)

車載藍牙外殼高光無痕注射CAE分析及參數優化 ………………………………………………………………………胡文文,辛 勇(4-61)

熔體溫度對水穿透行為影響的可視化研究 …… 劉旭輝,黃漢雄(4-65)

玄武巖纖維增強塑料筋混凝土梁受彎破壞形態有限元分析……………………………………………………李炳宏,江世永,飛 渭(4-70)

注塑工藝對聚碳酸酯制品環境應力開裂行為的影響……………………………………… 韓 健,韓冬雪,劉春太,陳靜波,申長雨(4-76)

PVA復合薄膜水果保鮮研究 ………………………………………………………………………… 李陽博,吳文倩,劉哲偉,項愛民(4-80)

不同顏料濃度時添加高熔體流動速率PE-LLD的色母粒性能研究……………………… 喬 博,喬 輝,程曉靜,吳立峰,丁 筠(5-59)

PE-LLD/SEBS-g-MAH/POE-g-MAH共混體系流變性能的研究 …………………………………羅永春,仲 豪,熊 煦,龔方紅(5-63)

PP/CaCO3復合發泡材料泡孔形態預測模型的研究 ………………………………………………………………………王喜順,黃 松(5-68)

基于CAE的壁厚不均勻塑件的結構修正 ………………… 董金虎(74)

Moldflow在注射成型翹曲優化中的應用……………………………………………………………… 趙龍志,陳炳輝,楊 敏,張尚兵(5-78)

基于Moldflow的注塑模流道平衡設計與分析 ………… 周大路(6-50)

熱老化對YJV電纜絕緣護套塑料燃燒性能的影響 ……… 舒中俊(6-55)

前照燈配光鏡材料光源輻照及耐化學試劑測試研究………………………王鐵城,錢國剛,黃 炘,房 旭,趙 斌,朱 瑛,蔣 羽(6-58)

金屬基復合材料的摩擦學性能及結合強度試驗研究 …… 王成軍(6-62)

PP基木塑復合材料的制備及性能研究 …………………………………………………………………宮敬禹,陳元芳,韓 超,葉 陽(6-67)

氣輔成型制品氣道優化設計研究……………………………………………………………………… 付慶興,程曉鋒,李 義,梁繼才(7-55)

MAPE含量對PE木塑復合材料沖擊強度的影響…………………………………………………… 張清鋒,呂 群,蔡培鑫,來國橋(7-60)

工藝參數對水輔注塑彎管壁厚的影響 ………… 劉旭輝,黃漢雄(7-64)

基于Moldflow的汽車保險杠注射成型分析 ……………………………………………………………………李永泉,李 峰,孫 晉(7-69)

電纜燃燒煙氣釋放速率的實驗研究 …………… 楊守生,何 翊(7-74)

注射發泡成型聚丙烯/木粉復合材料配方體系的研究 …………………………………………………………………… 張 軍,何繼敏(8-49)

高密度聚乙烯薄壁件注射成型時的結晶特性研究…………………………………………………… 蔣炳炎,侯文潭,邱慶軍,蔣豐澤(8-55)

成核母粒及螺桿組合對玻纖增強PET復合材料性能的影響 ………………………………………………… 傅明連,鄭炳云,陳彰旭(8-60)

基于神經網絡集的注射成型工藝參數多目標優化…………………………………………………… 胡澤豪,衛 煒,劉 娟,劉 琨(8-64)

擠出牽引速度對聚乙烯/金屬錫導電復合材料性能的影響 …………………………………………………… 何全國,梁全才,胡 瀾(8-72)

新型復合支撐插管擠出成型工藝 ……………… 王 銘,張東惠(9-53)

艦船用輻射交聯無鹵阻燃電纜護套料的研究……………………………………… 郭振濤,李淑鳳,矯 陽,侯欣鵬,李鐵軍,張 龍(9-56)

均勻設計法在POE/POE-g-MAH增韌PA 6研究中的應用……………………………………………………陳 坤,鄭梯和,曹 喆(9-6 1)

新型塑料檢查井專用料的開發與應用研究…………………………………………………………… 郭 林,李 艷,胡俊強,楊建華(9-64)

基于熔接痕處應力值的澆口位置優化設計…………………………………………………………… 單 志,朱建華,劉 勇,朱祖媛(9-68)

高剪切應力對ABS/NBR共混物力學性能的影響…………………………………………………………… 李懷棟,張云燦,錢 慧(10-62)

PP/POE/T-ZnOw復合材料流變行為的研究………………………………………………………………… 王 蕾 ,胡國勝,王標兵(10-66)

基于穩健優化的注塑件變形預補償方法研究……………………………………………………… 黃風立,劉國文,顧金梅,許錦泓(10-71)

PVC-U加筋管的生產工藝研究及其品質影響因素分析 ………………………………………………………………沃奇中,陳毅明(10-76)

聚苯乙烯/CO2發泡體系的氣泡生長過程模擬 …………………………………………………… 賀朝暉,信春玲,李慶春,何亞東(11-62)

相容劑和加工工藝對PA 1010/PP共混體系形態和力學性能的影響 …………………………………………………張甲敏,連照勛(11-68)

熔融紡絲法研究聚乙烯熔體的拉伸流變性能 …… 鐘磊,梁基照(11-72)

加工溫度對氯化聚氯乙烯凝膠度及力學性能的影響………………………………………………………… 王艷芳,滕謀勇,徐保良(11-76)

木塑/超臨界流體復合材料泡孔成核的數值模擬研究 ……………………………………………………………………………張婧婧(11-80)

鋼塑復合管端部密封技術的研究…………………………………………………………………… 賈明印,薛 平,李愛軍,丁 筠(12-72)

座椅塑件開裂問題的解決 …………… 王 鑫,杜林芳,李海梅(12-77)

無鹵阻燃PC/ABS合金流變行為的研究……………………………………………………………………… 吳 若,段輝麗,劉春林(12-80)

PTFE乳液制備PTFE/YSZ微孔膜及孔隙率的研究……………………………………… 杜金麗,鄧新華,孫 元,羅衍慧,龐向川(12-84)

水發泡抗靜電半硬質聚氨酯泡沫塑料的制備和性能研究………………………………………… 梁書恩,田春蓉,王建華,蔚春蓉(12-89)

膨脹型阻燃劑阻燃PP/SBS/POE共混物的性能研究 ………………………………… 王炎祥,張立群,李紅霞 ,梁文利 ,田 明(1-74)

三聚氰酸螺環磷酸酯阻燃聚丙烯的性能研究……………………………………………… 姜大偉,孫才英,向海旺,董春梅,胡樹林(1-81)

鋁酸鋅包覆氫氧化鎂的制備及其在軟質PVC中的抑煙性能研究 ……………………………………………………… 董亮亮,姜宏偉(2-87)

新型P-Br阻燃劑對環氧樹脂阻燃性能和力學性能的影響 ……………………………………………………盧林剛,周 霞,趙 敏(2-92)

硅微粉粒徑及其匹配對IC封裝用環氧模塑料流動性的影響 ……………………………………… 楊明山,劉 陽,李林楷,李冬雪(3-92)

改性TiO2在PVC基體中的分散行為研究………………………………………………………………………羅美芳,王煥冰,李春忠(3-96)

溴化環氧樹脂協同三氧化二銻阻燃PET的燃燒性能及阻燃機理研究………………………………………徐曉楠,楊海潮,王 芳(4-86)

超細Fe粉改性聚甲醛的研究 ………………………………………………………………………… 劉 莉,孫立水,李少香,劉光燁(4-91)

APP/MCA復合阻燃增強聚丙烯的研究……………………………………………………… 錢立軍,韓鑫磊,葉志殷,葉龍健,許國志(5-81)

碳酸鈣對PVC增塑糊黏度及穩定性的影響研究 ………………………………………… 徐國敏,張敏敏,吉玉碧,羅 恒,譚 紅(5-85)

酚醛樹脂為囊壁的超細微膠囊紅磷制備及其表征…………………………………………… 常懷春,呂通建,許秋菊,孫青峰,韓光喜(6-72)

羥基錫酸鋅的制備及其對PVC電纜材料的阻燃消煙作用 ………………………………………………………………………楊 玲(6-76)

辛二酸/硬脂酸鈣雙組分成核劑對等規聚丙烯中β晶生成的影響 ………………………………………………………薛建峰,竇 強(7-78)

納米SiO2與玻璃纖維混雜增強聚酰胺6復合材料的摩擦磨損性能研究………………………………………張 靜,楊和梅,顧紅艷(7-83)

膨脹型阻燃劑和有機蒙脫土協同阻燃聚丙烯的研究………………………………………………………………………李 瑩,王向東(7-87)

協效阻燃劑對PE-HD/Ca(OH)2復合材料阻燃性能影響的研究 ……………………… 陳藝蘭,肖良建,陳榮國,肖荔人,陳慶華(8-75)

星形受阻酚抗氧劑的抗氧化性能研究……………………………………………………………………………李翠勤,王 俊,張會平(8-81)

磷系阻燃劑對PPO/PS-H I合金性能的影響 ……………………………………………… 張 偉,李 剛,李慶春,戴伍國,袁 文(9-72)

阻燃劑對軟質聚氨酯泡沫熱分解產生氰化氫的影響………………………………………………………………………楊守生,盧林剛(9-77)

常用抗氧劑對PMMA樹脂熱氧化穩定性的影響 ………………………………………… 魏長吉,曹春雷,張子健,楊海東,張會軒(10-81)

有機硅改性環氧樹脂的制備及其性能研究………………………………………………… 李美麗,楊 祥,景錄如,李 倩,張院萍(10-85)

酚氧基環磷腈阻燃環氧樹脂的熱解過程研究……………………………………………………… 王 銳,謝吉星,焦運紅,徐建中(11-84)

高分子阻燃劑BPS在PS-H I中的應用研究 ……………………………………………… 陳 梁,王浩杰,張 燦,井蒙蒙,劉繼純(12-94)

分散劑對松香型成核透明PP結晶行為和透明性的影響 ………………………………… 田瑤珠,王 松,秦 軍,羅 筑,于 杰(12-98)

多次注塑H IPS的力學性能與化學結構的關聯性研究 ……………………………………………… 張玉冰,高照明,徐慶強,徐 兵(1-85)

廢舊塑料薄膜分離方法的實驗研究 …………… 張群安,史政海(2-96)

肥料用聚苯乙烯包覆膜的制備及其性能研究…………………………………………………………………… 宋學君,張旭東,石元亮(6-82)

廢舊塑料/磷石膏復合模板加熱溫度與保溫時間的研究 ………………………………… 劉 彤,陳前林,宋 強,李賀軍,公偉廣(8-86)

玻璃纖維增強回收聚對苯二甲酸乙二醇酯復合材料的力學性能研究…………………… 魯 萍,吳德峰,邱明敏,張 明,王江洪(9-84)

廢棄滌綸織物對β成核劑改性回收PP結晶熔融行為及形態的影響……… 沈俊才,李伯成,林志丹,張秀菊,李政軍,劉能盛(10-89)

廢棄環氧模塑料填充聚氯乙烯的研究………………………………………………………………………… 許文嬌,陸書玉,羅麗娟(11-89)

超高相對分子質量聚乙烯的相對分子質量及其分布的測試方法………王新威,沈賢婷,郭 寧,張 煒,張玉梅,吳向陽,徐靜安(1-94)

熱重 質譜聯用對膨脹型阻燃劑阻燃EVA的機理研究 ………………………………… 徐建中,時 佳,謝吉星,焦運紅,孫 赟(3-101)

磁敏橡膠材料彈性模量的測試與研究…………………………………………………………………………… 陳先忠,肖 靜,游世輝(4-96)

熱重法測定淀粉基塑料中淀粉含量的方法研究…………………………………………………………………………… 凌 偉,翁云宣(5-89)

聚乙烯管道接頭超聲檢測基礎數據庫軟件開發……………………………………………… 王 非,李廣忠,卲漢增,施建峰,鄭津洋(6-86)

微波爆米花包裝袋用微波感受材料中非揮發性紫外可吸收物質遷移行

為研究 ……………………… 應 璐,王全林,戴雙燕,劉志洪(7-92)

冷熱水用塑料管道系統標準體系分析及基本計算 ……… 謝建玲(8-91)

國內外微波食品塑料包裝安全性研究現狀……………………………………………… 宋 翠,陳淑祥,高翠玲,王微山,許 超(12-102)

基于標準模架和模塊化的注射?？焖僭O計系統研究與開發…………………………………………………… 王江濤,申明倩,沈 杰(1-99)

T形異型材擠出口模的逆向數值模擬……………………………………………………………… 徐 磊,柳和生,黃興元,黃益賓(1-103)

帶把雙色塑料杯的注塑模設計 ……… 匡唐清,周慧蘭,彭琛琛(2-100)

超高速注塑機電液系統的分析與仿真研究………………………………………………………… 蔡康雄,文生平,溫展飛,金 暉(2-103)

銷釘單螺桿混煉段分布混合性能的數值研究………………………………………………………………… 李曉翠,彭 炯,陳晉南(2-109)

正 斜雙聯齒輪四板注塑模設計 …… 周慧蘭,周新建,劉明財(3-105)

雙轉子連續混煉機混煉段拉伸作用的研究…………………………………………………………………… 張 霞,謝林生,馬玉錄(3-108)

基于UG的轎車內飾件注塑模設計…………………………………………………………………………… 李艷娟,王 芳,劉曉東(3-114)

不同鎖模機構注塑機脹模特性的研究……………………………………………………………… 張攀攀,謝鵬程,華 岱,楊衛民(4-100)

基于CAE技術的CRT顯示器后殼注塑模設計……………………………………………………………… 匡唐清,黎秋萍,劉 艷(4-104)

CAD/CAE集成多型腔模注射澆口優化設計 …………… 劉國亮(4-109)

溫度控制保壓過程對制件質量重復精度的影響…………………………………………… 吳 廷,安 瑛,謝鵬程,譚 晶,楊衛民(5-94)

手機外殼雙色反向模具的頂出系統設計 ……… 周泳全,姜家吉(5-97)

基于熔體溫度均勻性的注射螺桿性能評價方法……………………………………………… 周雅文,何亞東,信春玲,閆寶瑞,李慶春(6-91)

基于模流分析技術的壁掛式揚聲器外殼注塑模設計 …… 匡唐清(6-97)

波狀雙螺桿元件混合性能的研究……………………………………………………………………… 武學偉,馬秀清,李彥輝,田 軍(7-98)

帶嵌件注塑模具冷卻過程的邊界元分析…………………………………………………………… 張明飛,石憲章,趙振峰,劉春太(7-102)

CAE技術在電熱水壺外殼注塑模設計中的應用 ……… 匡唐清(7-106)

捏合盤錯列角和厚度對聚丙烯降解的影響…………………………………………………………… 田 軍,馬秀清,武學偉,李彥輝(8-99)

基于Pro/E的螺紋法蘭注塑模具及模架設計……………………………………………………………………周慧蘭,匡唐清,萬金金(9-90)

嚙合異向雙螺桿擠出機中捏合塊元件對PE-HD/PS不相容體系混合效果的研究 …………… 李彥輝,馬秀清,武學偉,田 軍(9-94)

基于正交試驗與數值模擬的木塑異型材擠出機頭流道設計方法………………………… 趙 峰,薛 平,苗立榮,劉天濤,方曉鐘(10-94)

基于Moldflow的熱流道雙色注射模具的流動平衡優化 …………………………………………………… 徐 巖,賈建波,王慎波(10-100)

螺旋溝槽單螺桿擠出機雙螺棱推動理論模型的研究…………………………………… 潘 龍,賈明印,薛 平 ,金志明,唐廣利(11-94)

計量段結構對注塑螺桿建壓能力的影響……………………………………… 劉 迎,信春玲,李慶春,閆寶瑞,周雅文,何亞東(12-107)

醫用塑料專題 ……………………………………………………(1-107)

電纜料專題 ………………………………………………………(3-118)

PVC加工專題……………………………………………………(10-104)

以客為先,持續創新——訪香港雅式展覽服務有限公司項目總監 梁雅琪…………………………………………………………《中國塑料》雜志社(1-111)

質量求精,服務求誠——訪四川龍蟒集團 …………………《中國塑料》雜志社(2-113)

以科技為先導 共創聚合物發泡光明未來——訪合肥會通新材料有限公司 何順倫總經理………………………………………………………………《中國塑料》雜志社(4-113)

銳意創新、不斷超越——訪北京天罡助劑有限責任公司 …《中國塑料》雜志社(4-117)

創造科學奇跡——訪杜邦鈦白科技事業部大中華區業務總經理陳富恒先生…………………………………………………《中國塑料》雜志社(5-101)

創新與卓越的答案——訪泰科納公司大中華區銷售總監汪云鴻先生………………………………………………………………《中國塑料》雜志社(6-103)

發展源于不斷創新——訪巴斯夫公司亞太區特性化學品部塑料添加劑副總裁嚴凱鵬先生 ………………………《中國塑料》雜志社(7-111)

顏色無極限——訪贏創德固賽(中國)投資有限公司涂料原料及添加劑Polytrend?塑料色漿業務線亞太區市場部經理李輝先生………………………………………《中國塑料》雜志社(8-105)

為您提供無限的創造力——訪杜邦中國集團有限公司高性能聚合物大中國區銷售經理黃 晨先生 …………………………《中國塑料》雜志社(9-99)

努力發展高分子材料先進制造技術——訪北京化工大學高分子材料先進制造英藍實驗室學術帶頭人楊衛民教授 ………………………《中國塑料》雜志社(11-101)

達為兼濟天下,誠乃立業根本——訪廣東達誠機械有限公司總經理萬松洲先生……………………………………………………………《中國塑料》雜志社(12-113)

Total Contents of 2010

Countermeasuresof Plastics Additives under the Environmental and Sanitation Law s and Regulations……………………………………………BAO Hongyan,SUN Shaogang, L IRunlin,WANGLei,WANG Zhaohui,CHEN Yu(5-1)

A Concep t of Differential and Integral Method in Advanced Processing of Polymer Materials ………YANGWeimin(7-1)

Technological Innvonation——Way out fo r PVC Pipes Industry in China …………………………ZHANG Yuchuan(11-1)

Situation and Development Trend of Plastics Pipe Industry in China …………………………………WANG Zhanjie(1-1)

Surface Modification of Poly(aryl ether ketone)s and Their Biomedical App lications……………………………………………SUN Hui,SUN Jie,XU Yingkai,XU Guozhi(1-6)

Polyhydroxyalkanoates—A Widely App lied Biodegradable Polymer ………TA ILimin,JIANG Ying,FENG Sijing(2-1)

Research Progress in High Dielectric Permittivity Polymeric Composites…………………………………………………………ZHOU Wenying,ZUO Jing,REN Wene(2-6)

Structure Imp rovement and Development of Coextrusion Dies fo r M ulti-layer Plastics Film s………………………………………M IAO Lirong,ZHANG Yuxia,XUE Ping(2-11)

Research Progressof ABS/Carbon Nanotubes Nanocomposites……………ZHOU Liang,L IDongmei,YANG Ying(3-1)

Research p rogress of Halogen-free Flame-retardant Phosphoruscontaining Epoxy Resins ……………………YE Longjian, Q IAN Lijun,TONG Shaopeng,XU Guozhi(3-11)

Progress in Numerical Study on Polymer Extrusion Die Design…………………………CHEN Jinnan,PENG Tao(3-19)

China Plastics Industry(2009) …………L IAO Zhengpin(4-1)

Developing Situation and Trendsof China XPS Foam Sector……………………………………………WANG Yong(4-12)

Development Scenario of China Polyolefin Industry in 2009 and Its Prospect During Twelfth Five-year-p lan Period…………………………………………………L IU Jian(4-17)

Research Progress on the Compatibility Imp rovement of Polyp ropylene Flame-retarded by Intumescent Flame Retardants………………………L IU Dingfu,L IANG Jizhao(5-6)

Recent Developmentof Polypyrrole/Inorganic Particle Nanocomposites ……………………DUAN Guochen,Q IShuhua, WU Xinming,Q IHaiyuan,ZHANG Yi(5-14)

New Pipes and Piping System s in China Plastics Pipes Industry…………………………………………L IN Shaoquan(6-1)

Research Progress in PVC/Wood Flour Composites………………………………WU Bo,Q IShuhua,WANG Xin(6-6)

M icro-injection Molding Technology and Differential Injection Molding Technology ……………………ZHANG Panpan, WANG Jian,XIE Pengcheng,YANGWeimin(6-13)

Research Progress in Synergistic Agents of Intumescent Flame Retardants Containing Ammonium Polyphosphate …………………………………QU Hongqiang,WU Weihong, WU Hongjuan,XU Jianzhong(7-7)

Research Progress in Novolac-type Phenolic Resin in Foreign Countries …………L IShasha,Q IShuhua,L IU Nailiang, LU Wenshu,L IMengtao,XU Dengshun(7-13)

Progress in the Study of Structure and Properties of Heterophasic Impact-resistant Polyp ropylene Blended in Reacto rs……………………………………………LüLixin(8-1)

Analysis of Situations of China Agro-film Industry(2010)and Countermeasures fo r Its Development…………………………………………………………ZHOU Dagang(8-9)

Advances in the Study of Chlorinated PVC Resins Prepared by Gas-solid Phase Method ……………ZHANG Xiangjing, GUO Xinxin,L IU Yumin,ZHAO Sa,HU Yongqi(8-13)

Research Progress in Preparation Process of Starch-based Foamed Plastics ………CHEN Xiaojian,TA ILimin(9-1)

Research Progress in Chitosan-based Intelligent Hydrogels…………………SHU Jing,L IXiaojing,ZHAO Dabiao(9-6)

Research Progress in Synergistic Flame Retardants of Magnesium Hydroxide ………………………………WANGJuan, L IZhiwei,L IXiaohong,ZHANG Zhijun(9-11)

Review of Intumescent Flame Retardants…………………………………………………CHEN Xiaoping,ZHANG Sheng, YANGWeiqiang,CU IZheng,CHEN Xiaosui(10-1)

Characteristicsof Solventless Lamination Technology and Structure of Equipment Associated w ith It……………………LüLing,GAO De,XU Wencai,ZUO Guangshen(10-9)

Research Progress in Ceramization of Silicone-based Polymers WEIFangming,WANG Tingwei,SHAO Haibin(10-17)

Current State and Development Trends of New-materials-based Light Conveyor Belts in China ………XU Qianwei(11-6)

Research Progress in Polyp ropylene/Nano Silicon Dioxide Composites ……………ZHAO Yicheng,YAO Junyan(11-11)

Research Progress in Reactive Processies of Sulfonated Polystyrene ……………………………………………ZHOU Rui, WEIRongqing,L IU Xiaoning,CHEN Xinying(11-15)

Research Development of O rdered Mesoporous Polymers……L IU Panbo,JIAO Jian,ZOU Liang,XU Xiangdong(12-1)

App lication and Developing Trend of Plastics Used in“Light Weight”Automobile ……………………L IU Xiwen(12-8)

Study Progess of M icrocellular Plastics Foamed by Supercritical CO2…………………………………………………………CHENGBo,Q IShuhua,WU Bo,CAO Peng(12-14)

Organic Modification of Mesoporous Silica and Its Effect on Tensile Properties of Epoxy Resins…………………………………JIAO Jian,L IU Panbo,ZOU Liang(1-11)

Synthesis of Star-shape SAN Resin and Its Effect on Properties of ABSResin ………………CHEN M in,CAO Chunlei, WANGDandan,XIAO Linghan,ZHANG Huixuan(1-17)

Study on Compatibility of PC/PET A lloys…………………………………………………XUE Jirong,N ING Ping(1-23)

Study on Preparation and Properties of Silicone Rubber/Chlo rinated Polyethylene Blends …………………………………CHENGQingmin,LUO Shikai,D ING Guofang(1-28)

Effect of OMM T on Crystallization and Compatibility of PEHD/PA 6 A lloys …………SUN Li,XIANG Saifei(1-33)

Thermal Behavio r and Tensile Property of Epoxy Resin/Rice Husk Silica Nanocomposites …………………L IU Jiyan, L IU Xueqing,ZHANG Yuanfang,GAN Yanmei(1-38)

Study on Hydrophilicity of Hydroxymethyl Acrylamide Grafted Polyp ropylene …………………………………FENG Jie, FENG Shaohua,XIANG Yixin,FENG Chang(1-43)

Study on Compatibilizers fo r PBT/ABSA lloys…………………………………………………TIAN Ye,DUAN Chunlai, ZHOU Ting,L IRongqun,XIN M inqi(1-47)

Study on the Hyperdispersion Property of Carbon Black in PA 6……………………………SONG Yunhua,FAN Chuang, WANG Chengzhong,XU Desheng,L IGe(2-21)

Study on the Isothermal Crystallization Behavio r of PPComposites Filled with Talc o r Calcium Carbonate…………………………ZOU Yan,JIBinbin,WEN Bianying(2-26)

Preparation and Luminescence Property of Polystyrene/Cd Te Composites Emitting Green Light Under Visible Light………………………………………………WANGWen, L IN Meijuan,HUANG Limei,SU M ianmian(2-30)

Effectsof Epoxy Resin on Properties of Polyamide 6/EPDM-g-MAH Blends …………………JIANG Yaogui,YANGQi, HUANG Yajiang,SUN Jing,CHENG Xiaolian(2-35)

Study on Properties of Epoxy Resin/Novolac System Modified by Organosiloxane Containing Phospho rus……………………………………………………WANG Zhengfang, L IU Weiqu,HU Chaohui,MA Songqi(2-42)

Preparation and Properties of PA 6/Epoxy-resin-modified Montmo rillonite Nanocomposites ………………ZHOU Xueqin, SHENG Zhongyi,XIE Songgui, SHENTU Baoqing,WENG Zhixue(2-47)

Preparation and Properties of Long-glass-fiber Reinfo rced Polyp ropylene/m-Polya-mide 6 Composites……………………FANG Kun,WU Sizhu,D ING Xuejia,L IMei(2-52)

Properties of Poly(vinyl acetate)/Organophilic Montmorillonite Nanocomposites Prepared by In Situ Emulsion Polymerization ……L IU Ling,ZENG Xingrong,LA IXuejun(2-57)

Mo rphology and Mechanical Properies of PVC/MBSBlends………………………………………CHU M ingli,L IU Zhe, L IHongquan,CHEN M ing,ZHANG Huixuan(3-25)

Study on the M icrostructure and Thermal Propertiesof L-lactide andε-cap rolactone Copolymers…………………………………LU Yue,XIONG Zuochun,ZHANG Shenglan, XIONG Chengdong,CHEN Dongliang(3-29)

Non-isothermal Crystallization Kinetics of Polyp ropylene/Polyamide 6 Blends In-situ Compatibilized w ith PAG ………………………L IANG Shujun,YANGWantai(3-34)

Study on Synthesisof a Super-water-absorbent Copolymer of A-crylic Acid and Acrylamide Inco rpo rated w ith A ttapulgite Clay Prepared under M icrowave Radiation………………………LA IShuili,CHEN Feng,HAN Wujun(3-41)

Rheological Behavio r of Acrylonitile-styrene-acrylate Copolymer……………………………WANG Yanfang,CU ILingling, XU Baoliang,TENGMouyong(3-45)

Effect of Selective Distribution and M igration of Ino rganic Nanoparticleson Mo rphology and Properties of Polymer Blends………………YU Jie,HU Shijun,GUO Jianbing, ZHANGM inmin,Q IN Shuhao(3-49)

Study on Flame-retardant Property of Polyurethane Foam Using Cone Calorimeter ……………………YU Baogang(3-55)

Effect of Polyamide 6 on Polyp ropylene/M icroencap sulation Ammonium Polyphosphate…………………………………………………MA Zhiling,TANG Huipeng(3-60)

Study on Indoor and Outdoo r Aging Behavior of PP and PP/EPDM Blends …………………FAN Pengpeng,GAO Liyan, L IU Xiaoling,YANGQi,L IU Yuxin(4-21)

Effect of Structure ofα-MSAN Copolymer on Compatibility of PMMA/α-M SAN Blends ……M ENG Ting,REN Liang, ZHANG Lixin,MA Xiaolin,ZHANGM ingyao(4-27)

Effects of Glass Bead and Carbon Black on Curing Characteristics of EPDM Rubbers ……………………YANG Libao, LU Xiaozhong,LU Qingzhang,SUN Xiaomin(4-30)

Study on PA 6/PS Blends w ith Compatibilized Functionalized Graft Copolymer …………TAN Zhiyong,WANG Dandan, MU Xingwen,CHEN Min,ZHANG Huixuan(4-34)

Effects of Antistatic Agentson Antistatic and Mechanical Properties of Polyp ropylene…………………………………………L IU Wei,WANG Xiangdong,XU Guozhi(4-39)

Study on Synthesis and Propertiesof Maleic Anhydride Modified Lactic Acid Prepolymer……………………………………CHEN Youning,ZHANGJuncai,ZHAO Wei(4-44)

Chain Extension of Polyamide 6 w ith 2,2′-(1,3-phenylene)bis (2-oxazoline) ……………ZHANG Qian,WAN Chaoying, DANG Xiaorong,WU Kemian(4-49)

Synthesis and Characterization of Thermally Induced Shape Memory PCL/PU Copolymers …………CHEN Yadong, PENG Zhenbo,ZHANG Huibo,ZHANG Yongchun(4-54)

Influence of Solid-phase Polycondensation on Thermal and Crystallization Properties of Polyester Chips…………………………………CHEN Yun,JIN Jian,YIN Cuiyu(5-20)

Structure and Properties of Metallocene Linear Low-density Polyethylene Resin ……………………………L IPengpeng, L IANG Tianzhen,FAN Jie,YANG Shiyuan(5-23)

Research on the Surface Modification Mechanism of Poly(monochloro-p-xylylene)Films Modified by Sodium-naphthalene Comp lex ……………………GAO Liude,L IU Jian(5-28)

Ring-opening Polymerization of Lactide in the Presenceof Natural Amino Acids………………………L IU Jiyan,L IU Xueqing(5-34)

I

nfluence of Polymer Constitution on the Relationships Between Interfacial Tension and Molecular Weight ………………………………WU Aimin,SUN Zaijian,JIFaxiang(5-39)

Op timized Preparation of Fiber/Resin Thermop lastics Composites fo r Dental Endodontic Posts…………………………

HU Jiang,HE Huiming,L IU Yuhong,ZHENG Yaping(5-43)

Effects of Temperature and End-capped Additive Maleic Anhydride on the Viscosity-average Molecular Weight of Poly (p ropylene carbonate)……………………………………………………………ZHANG Guangjun,M ENG Hao, CHEN Youye,WANG Yingjie,WANG Hongxia(5-48)

Nonisothermal Crystallization Behavio rs and Crystal Morphology of PP/Nano-TiO2Composites ………………WU Yujiao, HE Hui,M ENG Riliang,L IU Changgui,CA IQijun(5-51)

Effect of Crosslinking of EPDM on“Sandbag”M icrostructure Evolution and Properties of PA 6/EPDM/Nano-CaCO3Ternary Composites ……………………FU Lidan,CHEN Si, WANG Yongjie,M ENG Jifeng,WANG Xu(6-19)

Isothermal Crystallization Behavior of Polyp ropylene/Sepiolite Composites…………………………………………………L IXiaoyan,HU Xiaoping,DA I Yatang,L IShaoxian(6-24)

Preparation and Propertiesof Thermally Conductive and Electro-insulating PP/T-ZnOw/M gO Composites……………………………L IGuangji,TONGQiyong,FENG Hui(6-28)

Synthesis,Structure and Propertiesof Biphenyl Epoxy Resin fo r Integrated Circuit Encapsulation……………………………YANGM ingshan,HE Jie,L ILinkai,XIAO Qiang(6-36)

Effect of Fe Pow der Contentson Friction and Wear Propertiesof Polyformaldehyde/Fe Pow der Composites…………………L IU Li,WANG Long,L IU Xiao,L IShaoxiang(6-40)

Mechanical and Electromagnetic Properties of Poly(phenylene sulfide)/NdxFe94-xB6Composites ………WANG Yongjie,

L I Yan,LU Ai,XU Yi,YU Xuejiang,WANG Xianzhong(6-45)

Preparation of Monomer Casting Polyamide 6-Polyether Block Copolymer/Nano-carbon Black Composites and Their Nonisothermal Crystallization Behavior ……………L IN Xuan, ZHOU Hongjun,YIN Guoqiang,ZENG Yuping(7-19)

Study on the Relationship Between Compositions and Properties of CPVC/ABS/CPE Ternary Blends……………………………………MA Jun,YUAN Maoquan,MU Nanxiang, HU Meihua,WANGJian,WU Dezhen(7-24)

Preparation of Polyaniline/Schiff Base Nano rods Composites and Their Conductive Properties……………………………………………………DUAN Guochen,Q IShuhua, WU Xinming,Q IHaiyuan,ZHANG Yi(7-28)

Study on M icrostructure and Electrical Properties of CER/ TM PTMA w ith Interpenetrating Netwo rks ………………………………DUAN Jingkuan,JIANG Pingkai(7-34)

Preparation and Propertiesof Environmentally-friendly Modified Furfural Epoxy Grouting Materials ……………………………GAO Nan,ZHANG Yafeng,KUANG Jianzheng, CHEN Yufang,XU Yuliang,ZHOU Hua(7-41)

Degradation Mechanism of ABS by Thermal Degradation Kinetics …YANG Youcai,L IRongxun,L IU Guangye(7-47)

Study on Epoxy-terminated Silicone Modified Epoxy Resins……………………………………L IHongjing,L IU Weiqu, W EIZhenjie,WANG Zhengfang,MA Songqi(7-51)

Study on the Conductivity of M ultiwalled Carbon Nanotubes Filled Polycarbonate/Styrene-series Polymer Composites……………SUN Yao,GUO Zhaoxia,YU Jian(8-17)

Preparation and Properties of Phenolic Resin/Montmorillonite Nano-composites ………………WU Jiangtao,Q IShuhua, L IChunhua,MO Junlian,L IMeiling,SHANG Lei(8-23)

Preparation and Flame Retardancy of PC/ABS A lloy Flame Retarded by Polyborosiloxane …………………SONGJian, ZHOU Wenjun,LüQun,CHEN Ke,CHEN Youcai(8-28)

Study on Emulsion Copolymerization Kinetics of Styrene/3-(trimethoxysilyl)p ropyl Methacrylate………………………………ZHAO Hongchi,WU Xiuting,GAO Shanshan, GAO Lingling,SONG Zhiwei,BA IHaiying(8-32)

Rheology Research of Polymer Crystallization Behavio r………………………………M IN M in,DA I Houyi,LU Ai(8-37)

Synthesis and Characterization of Polyaniline-La………………………………………………………………WU Tao(8-41)

Flame Retardancy and Influencing Facto rsof Epoxy Resin Flame Retarded by Intumescent Flame Retardant………………………………………MA Zhiling,LU Guangyu(8-45)

Preparation and Properties of Poly(lactic acid)/Montmorillon

ite Nano-composites ……………………SHEN Bin,L IU Liang, L IN Shuixing,YANG Yi,ZHANG Liye(9-17)

Research on Non-isothermal Crystallization Behavior of PA 6/ ABSBlends …………………L IU Chunlin,XIAO Yebin, L IJun,SHEN Hui,HUANG Renjun(9-22)

Study on Synthesisof Poly(butylene succinate-co-diethylene succinate) …………………………………………XIAO Feng, WANG Tingwei,D ING Pei,WANG Jingchun(9-27)

Research on Phospho rus-containing Flame-retardant Epoxy Resin for Solvent-free Winding ………………WANGJianyu, CHEN Lixin,HEWeiqi,KONGJiaoyue(9-31)

Study on Compatibilization Effectof Different Compatibilizerson Polyamide 1010/Polyp ropylene Blends……………………………………YANG Fengxia,WANG Xuejing(9-36)

Research on Mechanical and Crystallization Properties of Ethylene-co-polyp ropylene Resin fo r Casting Film s……………WANG Yingnian,KE Yangchuan,JIN Lixiao(9-41)

Perfo rmance of a New Kind Biodegradable A liphatic Polyester in Poly(butylene succinate)Group …………………GE Lan, SHAO Xiaocong,CHEN Jianwen,WU Jialin(9-46)

Resistivity-temperature Behavior of Acetylene Carbon Black Filled PE-HD/EVA/PE-LD Conductive Foamed Composites……………………………………L IJixin,WANG Liyan, L ISujun,ZHANGM u,WU Quancai(9-49)

Research Progress in Mo rphology of Dispersed Phases in Immiscible Polymer Blends under Flow Field ……………………HE Yusong,HUANG Yajiang,L IGuangxian(10-21)

Study on Flame Retardancy of Halogen-free Retardants Retarded High Impact Polystyrene …………………L IN Chunping, WU Daming,L IU Ying,ZHENG Xiuting(10-28)

Compatibilization Effect of POE-g-MAH and PP-g-MAH on PA 1010/PPBlends under Shearing Fo rce………………L IU Ping,YANG Fengxia,TAO Jianzhong(10-33)

Effect of Cu-loaded Montmorillonite on Flame Retardancy of PVC ………………YANG Ling,WANG Yongyi(10-39)

Effects of M icrocrystalline Cellulose Content on Properties of PE-HD Composites ……………………………L IHonglin, YANG Guisheng,WU Yucheng(10-43)

Study on Propertiesof PE-LLD w ith High Opening Perfo rmance……………………………………W EIFuqing,ZHOU Fubin, XU Huifang,L IPengpeng(10-47)

Study on Styrene and Maleic Anhydride Grafted Polyp ropylene in Water Suspension System ……………ZHU Baodong, WANGJian,DONGQun,SONGJun(10-50)

Preparation of Cellulose Grafted Butyl Methacrylate Oil Absorbing Resins Initiated by Ceric Ion ………Halidan Mamat, Ablimit,Kurbanjian Rouz,A limjian(10-55)

Structure and Propertiesof Glass Fiber Reinforced Isotactic Polyp ropylene Modified byβ-nucleating Agent Under Flow Field ……………………………………ZHANG Zhengchi, CHEN Yanhui,L IZhongming,TANGJianhua(11-20)

Study on Chemical Modification and Plastification of Soy Protein Isolate ………………………………………HU Shiming, CU I Yongyan,YANG Zhenxing,ZHAO Zhenlun(11-26)

Synthesis and Characterization of Hyperbranched Polyurethane………………………………JIN Yanling,REN Penggang, ZHANG Zhengwei,L I Yang(11-31)

Research on Preparation and Properties of Plasticized and Toughened Polyp ropylene ………………ZHOU Zhongyu, PAN Yongkang,TANG Songchao,WANGQinghai(11-35)

Study on Crystallization Behavior of Polyethylene Terephthalate Bottle Chips ……………ZHANGM u,CHEN Yanming, CHEN Hong,SIChunlei,GAO Qisheng(11-39)

Thermal Perfo rmance and Aging Properties of PEB-g-MAN/ SAN Blends Synthesized by Suspension Polymerization……………………………WANG Xia,ZHU Yongping, WANG Lianshi,CA I Tongmin,ZHANG Anqiang(11-43)

Functionalization of Low-density Polyethylene with Maleic Anhydride Through Stress-induced Initiation and Its Effect on the Peeling Strength of Al/PET Composite Film ………ZHANG Ling,ZHANG Yuncan,FU Weining(11-49)

Study on Blendsof PLA/Elastomer ……………………………………HUANGJin,WU Wenqian,XIANG Aimin(11-54)

Effect of Surface Treatment of SiC Nano-particle on Properties of PTFE/Nano SiC Composites………………………………………………GU Hongyan,D INGLanying(11-58)

Preparation and Properties of Polystyrene/Polyp ropylene/Nanointerrelated Kaolinite Composites…………………………

HOU Guixiang,L ISenlin,SANG Xiaoming,MA Xiaolin(12-21) Research on the Toughening Modification of CPVC………………………………………………KEWeixi,WANG Lan, HAN Weiwei,ZHANGMeng,SHEN Chuanxi(12-25)

Isothermal Crystallization Kinetics of PLLA/reactable Nano-SiO2Composites ……………………………GUO Yougang, ZHANG Yudong,XU Xiangmin,ZHANG Puyu(12-30)

Study on Properties and Mo rphology of PA 6/POEBlends Compatibized by POE Grafted Itaconic Acid………………………………………L IU Xijun,HOU Baoqing(12-36)

Thermal and Mechanical Properties of PMMA Reinforced by POSS ……………………………………YANGBenhong, L IMeng,HUANG Zhijun,WU Yun(12-42)

Influence of PP-MAH on the Morphology and Propertiesof PP/ Hemp Fiber Composites ……N IU Pengfei,CHEN Jianye, WEIXiaoming,WANG Xiaojun,YANGJie(12-46)

Study on Non-isothermal Crytallization Kinetics of POM and POM/Calcium Carbonate Composites…………………………HU IJiangtao,CHEN Zhengguang,L I Yunyong, ZHOU Weiyan,ZHOU Tao,ZHANG Aimin(12-52)

Study on Mechanical and Dynamic Mechanical Properties of PEG/PCL M ixed Soft Segments Degradable Polyurethane Foams ……………………………………WANG Yanyan, L IANG Shuen,TIAN Chunrong,WANG Jianhua(12-57)

Crystallization Behavio r of Linear Polyp ropylene/Low-density Polyethylene Foaming Blends……L IU Wei,L IU Bengang, WANG Xiangdong,XU Guozhi,ZHANG Yuxia(12-63)

Numerical Simulation fo r Filling Stage of Injection Molded Parts w ith Ribs …………………………………L IU Yongzhi, ZHAO Zhenfeng,MA Lan,SHEN Changyu(1-52)

ANSYS Software Simulation of Mechanical Properties of Steel Skeleton Reinfo rced PE-HD and Its Experimental Verifica-tion ………………………SUN Jianan,CHEN Bingbing, JIN Yangfu,GAO Zengliang,Q IAN Xin(1-56)

Numerical Simulation of Residence Time of Flow in Coat-hanger Dies Inserted w ith Different Co res……………………………………ZHOU Wenyuan,XIONG Chuansheng, M ENG Yaxin,YANGBaohong,WANGJinglu(1-59)

Effect of Processing Technology on Dispersion of Carbon Black in Polyethylene/Acetylene Black Composites……………ZHANGWenlong,LANGDandan,L ING Jun(1-64)

Study on Extrusion Foaming of Polyp ropylene w ith Supercritical CO2as Foaming Agent……………………………………………………………ZHANG Yuxia,L IU Bengang, WANG Xiangdong,L I Ying,XU Guozhi(1-69)

Effect of Antioxidanton the Structure and Propertiesof Polyethylene Photo-degra-dable Films ………………CHEN Jiabo, D ING Yonghong,L I Yunfeng,ZHU Wei(2-61)

Effect of Injection Molding Parameterson Foaming Behavio r and Mechanical Properties of M icrocellular PP/SiO2Nanocomposites ………………………GONGWei,GAO Jiacheng, HE Li,YU Jie,ZHENG Huan,HE Ying(2-66)

Effect of Foaming Parameters on Properties of Highly Foamed PPBoards ……………L IU Hui,CHUA IChengzhi(2-73)

Numerical Simulation of the Extrudate Swell of Polymer Melt Through Rectangular Channels…………………………………………………L I Yong,ZHENGJianrong(2-78)

Study on the Effect of Inorganic Nano-particles on the Anti-migration of Plasticizers in Printed PVC Film s……………YANGBaohong,BA I Yongping,CAO Yingjie(2-83)

Research on Injection Molding Technology of U ltra-thin Flower Po ts ……………………ZHANG Yang,XIN Yong(3-64)

Injection Molding of Two-color Electrical Enclosures…………L IDongmei,XU Yan,JIA Jianbo,WANG Shenbo(3-68)

Preaparation of PVC-g-DMC and Its App lication in PVC…………………………………………GE Yilan,L IQingshan, CU IZhanquan,SUN Zhongxue,GUO Bin(3-72)

Effect of Compounding Ratio of Two Different PVC Paste Resins Synthesized by Separated Process on the Viscosity and Stability of the Resultant PVC Plastisols ………JI Yubi, XU Guomin,ZHANGM inmin,HU Zhi,TAN Hong(3-79)

Development Scenario of Resins,Processing Technologies and M achines fo r Blow Molded Plastics Containers…………………………………L IU Xue,ZHANG Yuxia(3-83)

Op timization Design of Weld Line fo r Automobile Deco ration Parts Based on Numerical Simulation ………SHAN Zhi, M EI Yi,GUO Jianbing,L I Yangjun,Q IN Shuhao(4-58)

Parameter Op timization of High-gloss&Non-weld Line Injection Molding fo r Cases of Automotive Bluetooths Based on CAE ……………………HU Wenwen,XIN Yong(4-61)

Visualization Study on Effect of Melt Temperature on Water Penetration Behavio r During Water-assisted Injection Molding …………………L IU Xuhui,HUANG Hanxiong(4-65)

Finite Element Analysis of Flexural Failure Mode of Concrete Beams Reinfo rced w ith BFRPBars…………………………………L IBinghong,JIANG Shiyong,FEIWei(4-70)

Effect of Injection Molding Process on Environmental Stress Cracking Behavio r of Polycarbonate Parts………………………………………………HAN Jian,HAN Dongxue, L IU Chuntai,CHEN Jingbo,SHEN Changyu(4-76)

Study on Fresh-keeping Poly(vinyl alcohol)Composite Film s fo r Fruits …………………………………………L IYangbo, WU Wenqian,L IU Zhewei,XIANG Aimin(4-80)

Properties of Color Masterbatch Containing High Melt Flow Rate PE-LLD in Different Contentsof Pigment ……………………………………………Q IAO Bo,Q IAO Hui, CHENG Xiaojing,WU Lifeng,D ING Yun(5-59)

Rheological Behavior of PE-LLD/SEBS-g-MAH/POE-g-MAH Blends ……………………………………LUO Yongchun, ZHONG Hao,XIONG Xu,GONG Fanghong(5-63)

Predicting Model for Bubble Morphology of PP/CaCO3Foaming Composites ………WANG Xishun,HUANG Song(5-68)

Structure Modification of Injection Molded Plastics Parts w ith Uneven Thickness Based on CAE ……DONGJinhu(5-74)

App lication of Moldflow Software in Warpage Op timization of Injection Molded Parts …………………ZHAO Longzhi, CHEN Binghui,YANGM in,ZHANG Shangbing(5-78)

Balancing Design and Analysis of Runners of Plastics Injection Molds Based on Moldflow ……………ZHOU Dalu(6-50)

Effect of Thermal Aging on Fire Performance of YJV Cable Jacket Insulation Compound ………SHU Zhongjun(6-55)

Research on A tmospheric Test and Chemical Resistance Test of Headlamp′s Lens ………………………WANG Tiecheng, Q IAN Guogang,HUANG Xin,FANG Xu, ZHAO Bin,ZHU Ying,JIANG Yu(6-58)

Test Research on Tribological Properties and Bonding Strength of Metal Matrix Composites ……WANG Chengjun(6-62)

Preparation and Mechanical Propertiesof PPBased WPC………………………………GONGJingyu,CHEN Yuanfang, HAN Chao,YE Yang(6-67)

Study on Optimal Design of Gas Channel in Gas-assisted Injection Molding …………………………………FU Qingxing, CHENG Xiaofeng,L I Yi,L IANGJicai(7-55)

Effect of MAPE Contentson Impact Strength of WPC Based on PE ………………………………………ZHANGQingfeng, LüQun,CA IPeixin,LA IGuoqiao(7-60)

Effect of Processing Parameterson Wall Thickness of Water-assisted Injection Molded Curved Tubes………………………………………L IU Xuhui,HUANG Hanxiong(7-64)

Analysis of Injection Molded Automobile Bumpers Based on Moldflow ………L I Yongquan,L IFeng,SUN Jin(7-69)

Study on Smoke Release Rate of Cables during Burning…………………………………YANG Shousheng,HE Yi(7-74)

Research on the Formula System of Injection Molded Foamed PP/Wood-flour Composites…………………………………………………………ZHANGJun,HE Jimin(8-49)

Crystallization Properties of Injection Molded PE-HD Thin-wall Parts ………………………………………JIANGBingyan, HOU Wentan,Q IU Qingjun,JIANG Fengze(8-55)

Effect of Nucleating Masterbatch and Screw Combination on the Properties of Glass Fiber Reinforced PET Composites…FU M inglian,ZHENGBingyun,CHEN Zhangxu(8-60)

M ulti-objective Optimization of Injection Molding Processing Parameters Based on Neural Netwo rks Ensem ble……………HU Zehao,WEIWei,L IU Juan,L IU Kun(8-64)

Effect of Take-up Speed While Extruding on the Properties of PE/Stannum Conductive Composites ……………………………HEQuanguo,L IANGQuancai,HU Lan(8-72)

A New Extrusion Process fo r Composite Reinfo rced Cannulas……………………WANGM ing,ZHANGDonghui(9-53)

Numerical Simulation of the Cell Nucleation of WPC/Supercritical Fluid Composites …………ZHANGJingjing(11-80)

Study on End Sealing Technologies of Steel-plastics Composite Pipes…………………………………………………………JIA M ingyin,XUE Ping,L IAijun,D ING Yun(12-72)

Solution of Cracking Problem on Injection Molded Chair Parts……………WANG Xin,DU Linfang,L IHaimei(12-77)

Study on Rheological Behavior of Non-halogen Flame-retarded PC/ABSA lloy ………………………………………………………WU Ruo,DUAN Huili,L IU Chunlin(12-80)

Studies on Radiation-crosslinked Halogen-free Flame-retardant Cable Jacketing Compound Used fo r Naval Vessels……………………GUO Zhentao,L IShufeng,JIAO Yang, HOU Xinpeng,L I Tiejun,ZHANG Long(9-56)

App lication of Homogeneous Design in the Investigation of POE/POE-g-MAH Toughened PA 6………………………………CHEN Kun,ZHENG Tihe,CAO Zhe(9-61)

Development and App lication of a Novel Special Material fo r

Plastics Inspection Chambers……………………………………GUO Lin,L I Yan,HU Junqiang,YANGJianhua(9-64)

Gate Location Op timization Based on Stress Value of Weld Lines SHAN Zhi,ZHU Jianhua,L IU Yong,ZHU Zuyuan(9-68)

Effect of High Shearing Stress on Mechanical Properties of ABS/NBR Blends……………………………………………L IHuaidong,ZHANG Yuncan,Q IAN Hui(10-62)

Study on Rheological Behavior of PP/POE/T-ZnOw Composites………WANG Lei,HU Guosheng,WANGBiaobing(10-66)

Study on Deformable Pre-compensation of Injection Molded Plastics Parts Based on Robust Op timization…………………

HUANG Fengli,L IU Guowen,GU Jinmei,XU Jinhong(10-71)

Study on Processing Technology of PVC-U Ribbed Pipes and Facto rs Influencing Their Quality……………………………………………WO Qizhong,CHEN Yiming(10-76)

Computer Simulation of Bubble-grow th Process in PS/CO2Foaming System ………………………………HE Zhaohui, XIN Chunling,L IQingchun,HE Yadong(11-62)

Influence of a Compatibilizer and Processing Conditionson Mo rphology and Mecha-nical Properties of PA 1010/PPBlends………………ZHANG Jiamin,L IAN Zhaoxun(11-68)

Study on Extensional Rheological Behavio r of Polyethylene U-sing Melt Spinning Techniques………………………………………………ZHONG Lei,L IANGJizhao(11-72)

Effect of Processing Temperature on Gelation Degree and Mechanical Properties of CPVC ……………WANG Yanfang, TENGMouyong,XU Baoliang(11-76)

Preparation of PTFE/YSZ Composite M icroporous Membrane by PTFE Resin Emulsion and Investigation on Porosity …………………………………DU Jinli,DENG Xinhua, SUN Yuan,LUO Yanhui,PANG Xiangchuan(12-84)

Research on Preparation and Properties of Water Blow n Antistatic Semi-rigid Polyurethane Foams ……L IANG Shuen, TIAN Chunrong,WANGJianhua,WEIChunrong(12-89)

Properties of Intumescent-flame-retardant Retarded PP/SBS/ POEBlends …………WANG Yanxiang,ZHANG Liqun, L IHongxia,L IANGWenli,TIAN M ing(1-74)

Properties of Spirophosphate Cyanuric Acid Flame Retarded Polyp ropylene …………………JIANGDawei,SUN Caiying, XIANG Haiwang,DONG Chunmei,HU Shulin(1-81)

Preparation of Zinc A luminate Encapsulated Magnesium Hydroxide and Its Smoke Supp ression Property in Plasticized Poly(vinyl chloride)……………………………………………………DONG Liangliang,JIANG Hongwei(2-87)

Influence of Novel P-Br Flame Retardant on Flame Retardancy and Mechanical Propertiesof Epoxy Resin…………………………LU Lingang,ZHOU Xia,ZHAO M in(2-92)

Effect of Spherical Silica Particle Size and Their Matches on Flowability of Epoxy Molding Compound fo r IC Packaging…………………………YANGM ingshan,L IU Yang, L ILinkai,L IDongxue(3-92)

Study on Dispersity of Modified TiO2Particles in PVC…………LUO Meifang,WANG Huanbing,L IChunzhong(3-96)

Study on Combustion Propertiesand Flame-retarding Mechanism of Brominated Epoxy Resin and Antimony Trioxide Synergistically Flame-retarded PET………………………………XU Xiaonan,YANG Haichao,WANG Fang(4-86)

Study on U ltrafine Iron Pow der Modified Polyoxymethylene…L IU Li,SUN Lishui,L IShaoxiang,L IU Guangye(4-91)

Research on Polyp ropylene Composites Flame-retarded and Reinforced by APP/MCA ………Q IAN Lijun,HAN Xinlei, YE Zhiyin,YE Longjian,XU Guozhi(5-81)

Influence of Calcium Carbonate on Viscosity and Stability of PVC Plastisols …………XU Guomin,ZHANGM inmin, JI Yubi,LUO Heng,TAN Hong(5-85)

Preparation and Characterization of M icroencapsulated Red Phospho rus with Phenol-formaldehyde Resin as Shell Material ……………………CHANG Huaichun,LüTongjian, XU Qiuju,SUN Qingfeng,HAN Guangxi(6-72)

Synthesis of Zinc Hydroxystannate and Its Effect on Flame Retardancy and Smoke Supp ression of PVC Cable Materials………………………………………YANG Ling(6-76)

Effect of Suberic Acid/Calcium Stearate Bi-component Nucleating Agent onβCrystal in Isotactic Polyp ropylene……………………………XUE Jianfeng,DOU Qiang(7-78)

Friction and Wear Propertiesof Nano-SiO2and Glass Fiber Reinfo rced Polyamide 6 Composites…………………………………ZHANGJing,YANG Hemei,GU Hongyan(7-83)

Study on Synergistic Retarding Effect of Intumescent Flame Retardant and O rganic Montmorillonite on Polyp ropylene ………………………L I Ying,WANG Xiangdong(7-87)

Research on the Effect of Synergistic Flame Retardants on the Flame Retardancy of PE-HD/Ca(OH)2Composites……………………………CHEN Yilan,XIAO Liangjian, CHEN Rongguo,XIAO Liren,CHEN Qinghua(8-75)

Oxidation Resistance of a Star Type Hindered Phenolic Antioxidant …L ICuiqin,WANGJun,ZHANG Huiping(8-81)

Effectsof Phospho rus Flame Retardants on Properties of PPO/ PS-H IA lloy ……………………ZHANGWei,L IGang, L IQingchun,DA IWuguo,YUAN Wen(9-72)

Effect of Flame Retardants on HCN from the Thermal Decomposition of Soft PU Foam…………………………………………………YANG Shousheng,LU LinGang(9-77)

Effect of Current Antioxidantson Thermal Oxidation Stability of PMMA …WEIChangji,CAO Chunlei,ZHANG Zijian, YANG Haidong,ZHANG Huixuan(10-81)

Preparation and Propertiesof Silicone Modified Epoxy Resin……………………………………L IMeili,YANG Xiang, JING Luru,L IQian,ZHANG Yuanping(10-85)

nvestigatation on Thermal Degradation of Hexakis(phenoxy) Cyclotriphosphazene Flame Retarded Epoxy Resin………………………………………WANG Rui,XIE Jixing, JIAO Yunhong,XU Jianzhong(11-84)

App lication of Polymeric Flame-retardant BPS in PS-H I……………………………………CHEN Liang,WANG Haojie, ZHANG Can,L IU Jichun(12-94)

Effect of Crystallization Behavior and Transparency of Rosin Nucleated PPw ith Dispersant Agent…………………………………………………TIAN yaozhu,WANG song, Q IN Jun,LUO Zhu,YU Jie(12-98)

Study on Relationship between Mechanical Properties and Molecular Structure of Repetitious Injection Molded H IPS……………………ZHANG Yubing,GAO Zhaoming, XU Qingqiang,XU Bing(1-85)

Experimental Research on the Separation Method of Waste Plastics Film s …………ZHANGQunan,SH IZhenghai(2-96)

Preparation and Properties of Polystyrene Film fo r Fertilizers′Encapsulation………………………………………………SONG Xuejun,ZHANG Xudong,SH IYuanliang(6-82)

Research on Heating Temperature and Holding Time of Waste Plastics/Phosphogypsum Compound Formwo rk……………………………………L IU Tong,CHEN Qianling, SONGQiang,L IHejun,GONGWeiguang(8-86)

Mechanical Propertiesof Recycled Poly(ethylene terephthalate)/ Glass Fiber Composites …………LU Ping,WU Defeng, Q IU M ingmin,ZHANG M ing,WANG Jianghong(9-84)

Effect of Waste Polyester Fabric on Crystallization-melting Behavio r and Morphology of Recycled Polyp ropylene Modified byβNucleating Agent……………………………………………………SHEN Juncai,L IBocheng,L IN Zhidan, ZHANG Xiuju,L IZhengjun,L IU Nengsheng(10-89)

Study on PVC Filled w ith Waste Epoxy Molding Compound……………XU Wenjiao,LU Shuyu,LUO Lijuan(11-89)

Study on Molecular Weight and Molecular Weight Distribution of PE-UHMW ……………………………WANG Xinwei, SHEN Xianting,GUO Ning,ZHANGWei, ZHANG Yumei,WU Xiangyang,XU Jingan(1-94)

Study of Flame-retarding Mechanism of EVA Treated w ith Intumescent Flame Retardant by TG-MS ……XU Jianzhong, SH IJia,XIE Jixing,JIAO Yunhong,SUN Yun(3-101)

Research and Test of Elastic Modulus of Magnetorheological Rubber…………………………………………………………CHEN Xianzhong,XIAO Jing,YOU Shihui(4-96)

Determination of Contents of Starch in Starch-based Plastics by Thermogravimetry …L INGWei,WENG Yunxuan(5-89)

Development of U ltrasonic Detection Database of Polyethylene Pipe Joints …………………WANG Fei,L IGuangzhong, SHAO Hanzeng,SH IJianfeng,ZHENGJinyang(6-86)

Study on M igration Behavior of Nonvolatile U ltraviolet Absorbing Extractables from M icrowave Suscep tors Used in M icrowave Popcorn Bags ……………………………YINGLu, WANGQuanlin,DA IShuangyan,L IU Zhihong(7-92)

Analysis of Standards of Plastics Piping System s fo r Ho t and Cold Water Installations and the Basic Calculation………………………………………………XIE Jianling(8-91)

Research Status of Safety of M icrowave Food-use Plastic Packaging Materials at Home and Aboard…………………………………………………SONG Cui,CHEN Shuxiang, GAO Cuiling,WANGWeishan,XU Chao(12-102)

Research and Development of Rapid Design System fo r Injection Moulds Based on Standard Moldbases and Modular……WANGJiangtao,SHEN M ingqian,SHEN Jie(1-99)

Inverse Numerical Simulation of T-shape Dies for the Extrusion of Plastics Profile ………………XU Lei,L IU Hesheng, HUANG Xingyuan,HUANG Yibin(1-103)

Design of Injection Mould fo r Two-color Cups w ith Handles KUANG Tangqing,ZHOU Huilan,PENG Chenchen(2-100)

Analysis and Simulation of Electro-hydraulic System s of U ltra High Speed Injection Molding Machines……………………………………………………………CA I Kangxiong, WEN Shengping,WEN Zhanfei,JIN Hui(2-103)

Numerical Study on Distributive M ixing Perfo rmance of M ixing Section of Pin Single-screw Extruders…………………………L IXiaocui,PENGJiong,CHEN Jinnan(2-109)

D

esign of Four-p late Injection Molds of Spur-helical Gears ………ZHOU Huilan,ZHOU Xinjian,L IU M ingcai(3-105)

Study on Stretching Effect in M ixing Section of Two-rotor Continuous M ixers ………………………………………………………ZHANG Xia,XIE Linsheng,MA Yulu(3-108)

Design of Injection Molds for Cars′Interiors Based on UG Software………………………………………………………………L I Yanjuan,WANG Fang,L IU Xiaodong(3-114)

Study on Mold Separations of Injection Molding Machines w ith Different Clamping Units ………………ZHANG Panpan, XIE Pengcheng,HUA Dai,YANGWeimin(4-100)

Design of Injection Mold fo r Back Covers of CRTDisp lays Based on CAE…………………………………………………………KUANG Tangqing,L IQiuping,L IU Yan(4-104)

Op timization Design of Gate Location for Multi-cavity Molds by CAD/CAE …………………………L IU Guoliang(4-109)

Effect of Packing Controlled by Cavity Temperature on the Unifo rmity of Parts′Mass …………………………WU Ting, AN Ying,XIE Pengcheng,TAN Jing,YANGWeimin(5-94)

Ejection System Design of Two-shot Inverse Moulds of Mobile Phones′Cases ……ZHOU Yongquan,JIANGJiaji(5-97)

Performance Evaluation of Injection Molding Screw s Based on Melt Temperature Homogeneity …………ZHOU Yawen, HE Yadong,XIN Chunling,YAN Baorui,L IQingchun(6-91)

Design of the Injection Mold fo r Wall Speaker Covers Based on Moldflow Technologies …………KUANG Tangqing(6-97)

Study on M ixing Perfo rmance of Wave Tw in-Screw Elements WU Xuewei,MA Xiuqing,L I Yanhui,TIAN Jun(7-98)

Boundary Element Analysis of Cooling Process in Injection Molds w ith Embedded Inserts ……………ZHANGM ingfei, SH IXianzhang,ZHAO Zhenfeng,L IU Chuntai(7-102)

App lication of CAE Technology in Design of Injection Molds for Electric Water Heater Covers…KUANG Tangqing(7-106)

Influence of Staggering Angle and Thicknessof Kneading Blocks in an Intermeshing Co-rotating Tw in-screw Extruder on the Degradation of Polyp ropylene………………………………TIAN Jun,MA Xiuqing,WU Xuewei,L I Yanhui(8-99)

Design of Injection Molding Moulds for Tread Flanges Based on Pro/E………………………………………………………ZHOU Huilan,KUANG Tangqing,WAN Jinjin(9-90)

Influence of Kneading Blockson the M ixing Effectof PE-HD/PS Immiscible Blend in an Intermeshing Counter-rotating Tw in Screw Extruder………………………………………………L I Yanhui,MA Xiuqing,WU Xuewei,TIAN Jun(9-94)

Design Method of Die Runners fo r W PC Profiles Based on Numerical Simulation and O rthogonal Test…………………………………………………ZHAO Feng,XUE Ping, M IAO Lirong,L IU Tiantao,FANG Xiaozhong(10-94)

Flow ing Balance Op timization of Double-color Injection Mould w ith Hot Runners Based on Moldflow ……………………………XU Yan,JIA Jianbo,WANG Shenbo(10-100)

Study on Double-flight D riving Theo retic Model fo r Helically Grooved Feed Single-screw Extruder ………PAN Long,

JIA M ingyin,XUE Ping,JIN Zhiming,TANG Guangli(11-94)

Effects of Parameters of Metering Zone on Pressure-developing Capability of Injection Screw s……………………………………………L IU Ying,XIN Chunling,L IQingchun, YAN Baorui,ZHOU Yawen,HE Yadong(12-107)

Interview w ith M s L IANG Yaqi,Project Executive of Adsale Exhibition Services Limited…………………………………………………Edito rial Office of China Plastics(1-111)

Interview w ith Sichuan Lomon Corporation…………………………………………Edito rial Office of China Plastics(2-113)

Interview w ith M r HEShunlun,President of Hefei Huitong New Materials Co,L td……………………………………………………………Edito rial Office of China Plastics(4-113)

Interview w ith Beijing Tiangang Additive Co,Ltd…………………………………Edito rial Office of China Plastics(4-117)

Interview w ith M r CHEN Fuheng,Business General Manager of Greater China,Titanium Technologies Division of DuPont………………Edito rial Office of China Plastics(5-101)

nterview w ith M r Wang Yunhong,Sales Director of Ticona Great China ……Edito rial Office of China Plastics(6-103)

Interview w ith M r Jan Kreibaum,Vice President fo r Plastic Additives,Asia Pacific Perfo rmance Chemicals Division,BASF……………Edito rial Office of China Plastics(7-111)

Interview w ith M r L I Hui,Marketing Manager of Asia Pacific fo r Polytrend?of Coatings&A dditives,Evonik Degussa (China)Co,L td……………………………………………………………Edito rial Office of China Plastics(8-105)

nterview w ith M r HUANGChen,Sales Manager-Greater China, Performance Polymers,DuPont China Holding Co.,L td.……………………Edito rial Office of China Plastics(9-99)

Interview w ith M r YANGWeimin,a Leading Acadenic Scholar, Laborato ry of Advanced Polymer Processing,Beijing University of Chemical Technology…………………………………………Editorial Office of China Plastics(11-101)

Interview w ith M r WAN Songzhou,General M anager of Guangdong Designer Machinery Co,L td………………………………………Edito rial Office of China Plastics(12-113)