• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Influence of Setting Error of Tool on Tooth Profile and Contact Point of Face Gear Drive

    2014-05-05 22:55:40LiXiaozhen李曉貞ZhuRupeng朱如鵬LiZhengminqing李政民卿LiFajia李發(fā)家

    LiXiaozhen(李曉貞),Zhu Rupeng(朱如鵬),Li Zhengminqing(李政民卿),Li Fajia(李發(fā)家)

    College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautic,Nanjing,210016,P.R.China

    1 Introduction

    The face gear drive is a gear driving that a spur pinion meshes with a face gear,which the pinion shaft and face gear shaft can be intersecting or non-intersecting,and the face gear is processed by involute gear sharper cutter.Compared with the bevel gear drive,face gear drive has many advantages[1-3],such as simplified of structure,reduction of weight and noise,better split-power effect,decreased of vibration etc.Therefore,the face gear drive is suitable for application in helicopter transmissions,but a substantial step in the technology of face gear drive is based on processing of high precision face gear.

    The performed research is based on application of modern theory that has been research by Litvin,Zhu Rupeng,Zhao Ning,et al[1-10].In the references,the tooth profile and contact specialties of master face gear drive have been researched[4-11],but in machining process,setting error of tool will influence the tooth profile and contact characteristic of face gear drive.Therefore,the influence of the setting error of tool needs to be studied.

    2 Tooth Profile Equation of Face Gear with Setting Error of Tool

    2.1 Coordinate systems of processing

    The processing error of face gear is caused by the errors of gear shaping machine,fixtures of workpiece,setting of shaper cutter,machining deformation,machine tool stiffness,motion error of machine tool,profile error of tool,etc.The errors of gear shaping machine and fixture of workpiece can be regarded as the misalignment of shaper cutter.Therefore,only the processing error caused by setting of shaper cutter is analyzed in the paper.The setting error of shaper cutter includes two forms,one is misalignment of offset of shaper cutter,and the other is misalignment of obliquity of shaper.

    The coordinate systems of processing which are with misalignment of offset are shown in Fig.1.The fixed coordinate system of face gear is OF-XFYFZF,and the face gear rotates around the axis of OFZFwith the angular velocity ofωf.The fixed coordinate system of standard shaper cutter for standard installation is OM-XMYMZM,and the shaper cutter rotates around the axis of OMZMwith the angular velocity ofωm.The fixed coordinate system of shaper cutter with misalignment of offset along the axis of OMXMis OT1-XT1YT1ZT1,and the shaper rotates around the axis of OT1ZT1with the angular velocity ofωt1.The fixed coordinate system of shaper with misalignment of offset along the axis of OMYMis OT2-XT2YT2ZT2,and the shaper rotates around the axis of OT2ZT2with the angular velocity ofωt2.The parameters aand b are the offset of coordinate systems of OT2-XT2YT2ZT2and OT1-XT1YT1ZT1from the standard systemOM-XMYMZM,respectively.And parameter d is the location datum of shaper from workpiece of face gear.

    Fig.1 Coordinate system with setting error of offset

    The coordinate systems of processing which are with misalignment of obliquity are shown in Fig.2.The fixed coordinate systems of face gear and standard shaper of standard installation are the same as coordinate systems in Fig.1.The fixed coordinate system of shaper with misalignment of obliquity rotating around the axis of OMYMis OT3-XT3YT3ZT3,and the shaper rotates around the axis of OT3ZT3with the angular velocity ofωt3.The fixed coordinate system of shaper with misalignment of obliquity rotating around the axis of OMXMis OT4-XT4YT4ZT4,and the shaper rotates around the axis of OT4ZT4with the angular velocity ofωt4.The parametersεaandεbare the deflection angle of coordinates systems of OT3-XT3YT3ZT3and OT4-XT4YT4ZT4from the standard systemOM-XMYMZM,respectively.

    Fig.2 Coordinate system with setting error of obliquity

    2.2 Equation of standard face gear

    Standard face gear is machined by the shaper cutter which is standard installation through envelope theory.In machining process,the shaper cutter is an involute cylindrical gear,and the coordinate system of shaper cutter is shown in Fig.3.The coordinate system OM-XMYMZMis rigidly connected to the shaper.

    Fig.3 Coordinate system of shaper

    The equation of the tooth surfaceΣMof the shaper cutter is given by[11,12]

    where the upper and lower signs correspond to profileⅠandⅡ,respectively;rkis radius of the point on tooth surfaceΣMof shaper which is ex-pressed as rk=rb/cosαk;rbis base radius of shaper;αkis the pressure angle of the point k;θkis the angle between axis of OMYMand vector OMk,and θkis expressed asθk=π/(2·Nm)-invα+invαk,Nmis the teeth number of shaper;ukis the parameter which is along the axis of shaper.

    The homogeneous matrixe of equation of tooth surface is given by

    According to the meshing relationship between face gear and shaper shown in Fig.1,the homogeneous transformation matrix from the moving coordinate system of shaper Om-XmYmZmto the moving coordinate system of face gear Of-XfYfZfis the following equation

    Therefore,the tooth surface of shaper cutter is obtained from Eqs.(2,3)by coordinate transformation.

    The envelope condition between shaper cutter and face gear is expressed as[12-14]

    Therefore,the tooth surface equation of standard face gear is expressed as

    where the parameterφmis the angle of shaper rotates around the axis OMZM.

    The profile of standard face gear is obtained by numerical simulation with Matlab2007,which is shown in Fig.4.The number of teeth of the shaper is 30;the number of teeth of the face gear is 120;the module of shaper and face gear is 3mm;the pressure angle of shaper is 25°.

    Fig.4 Simulation of tooth surface of standard face gear

    2.3 Face gear with processing error of offset

    Processing error of face gear with misalignment of offset contains two forms which are shown in Fig.1.One is caused by offset along the axis OMXM,and the other is caused by offset along the axis OMYM.The equation of shaper cutter is the same as Eq.(1),and the difference is the subscript of Eq.(1)are replaced″M″with″T″,which is expressed as

    According to the meshing relationship shown in Fig.1,the homogeneous transformation matrix from the moving coordinate system of shaper with setting error Ot-XtYtZtto the moving coordinate system of face gear Of-XfYfZfis expressed as

    Matrix MMTis caused by setting error of shaper which is expressed as

    When parameter ais zero,matrix MMTis the transformation matrix from coordinate system OT1-XT1YT1ZT1to coordinate system OM-XMYMZM.When parameter bis zero,matrix MMTis the transformation matrix from coordinate system OT2-XT2YT2ZT2to coordinate system OM-XMYMZM.

    The tooth surfaceΣTof shaper with misalignment of deflection which is expressed in coordinate systemOf-XfYfZfas

    The envelope condition between shaper with misalignment of deflection and face gear is expressed as[12-14]

    whereφtis the angle of shaper rotating around the axis OTZT.

    Therefore,the equation of face gear with processing error of misalignment of deflection is expressed as

    The tooth profile of face gear with processing error of misalignment of offset is obtained by numerical simulation with Matlab 2007,which is shown in Fig.5.When the parameter ais 0.3,0 and-0.3mm and bis 0mm,the surfaceΣFof face gear is shown in Fig.5(a).When the parameter bis 0.3,0and-0.3mm and ais 0mm,the surfaceΣFof face gear is shown in Fig.5(b).

    Fig.5 Tooth profile of face gear with machining error of misalignment of offset

    According to Fig.5(a),the tooth profile of face gear with processing error which are misalignment of offset along the axis OMYMkeeps invariant,but the position of tooth profile will move along the axis of face gear.If parameter ais more than zero,the tooth profile moves along the positive direction of the axis of the face gear,and if parameter ais less than zero,the moving direction is opposite.

    According to Fig.5(b),the tooth profile of face gear with processing error which is misalignment of offset along the axis OMXMkeeps invariant,too,but the position of tooth profile will rotate around the axis of face gear.If parameter bis more than zero,the tooth profile rotates in the clockwise direction of the axis of the face gear,and if parameter bis less than zero,the rotating direction is opposite.

    2.4 Face gear with processing error of obliquity

    Processing error of face gear with misalignment of obliquity contains two forms which are shown in Fig.2.One is caused by the shaper whirling around the axis OMYM,and the other is caused by the shaper whirling around the axis OMXM.The surface equation of shaper is the same as Eq.(7).

    According to the meshing relationship shown in Fig.2,the homogeneous transformation matrix Mftfrom the moving coordinate system with processing error of shaper Ot-XtYtZtto the moving coordinate system of face gear Of-XfYfZfis the same as Eq.(8),but the matrix MMTwhich is transformation matrix from the fixed coordinate OT-XTYTZTto the fixed coordinate OM-XMYMZMis different from Eq.(9),and matrix MMTis expressed as

    where parameterεais the angle of misalignment of obliquity whirling around the axis OMYM,parameterεbthe angle of misalignment of obliquity whirling around the axis OMXM.When parameter εa=0,matrix MMTis the transformation matrix from coordinate systemOT4-XT4YT4ZT4to coordinate system OM-XMYMZM.When parameterεb=0,matrix MMTis the transformation matrix from coordinate system OT3-XT3YT3ZT3to coordinate systemOM-XMYMZM.

    The tooth profile of face gear with processing error which is misalignment of obliquity is obtained by numerical simulation with Matlab2007,which is shown in Fig.6.When the parameterεais 0.3°,0°and-0.3°andεbis 0°,the tooth surfaceΣFof face gear is shown in Fig.6(a).When the parameterεbis 0.3°,0°,-0.3°andεais 0°,the tooth surfaceΣFof face gear is shown in Fig.6(b).

    Fig.6 Profile of face gear with machining error of misalignment of obliquity

    According to Fig.6(a),the tooth profile of face gear with processing error of obliquity whirling around OMYMis deformation.If parameterεais more than zero,the work face of right tooth profile is up,while the fillet surface of right tooth profile is down,and the left tooth profile change in opposite direction.If parameterεais less than zero,the change direction is opposite.

    According to Fig.6(b),the tooth profile of face gear with processing error of obliquity whirling around OMXMis deformation.If parameterεbis more than zero,the medial tooth profile is up,while the lateral tooth profile is down.If parameterεbis less than zero,the rotating direction is opposite.

    At these parameters,the maximum error of influence of setting error of tool on tooth profile is 1.26%.

    3 Contact Specialties of Face Gear Drive with Processing Error

    The contact points of face gear with processing error meshing with spur pinion will be different for various types of processing error,and the chapter will analyze the influence of processing error to the position of contact points.

    According to the envelope theory,the equation of contact line of face gear with processing error meshing with shaper cutter is expressed as Eq.(12),and the contact lines are shown in Fig.4.

    The transformation equation of tooth profile of spur pinion from moving coordinate of spur pinion to moving coordinate of master shaper is expressed as

    The number NTof the teeth of the pinion is less than the number Nmof the teeth of the shaper:Nm-NT=2or 3[13,14],and the pinion and the shaper are regarded as internal gear pair.rPis the tooth surface equation of spur pinion;Mmpis the homogeneous transformation matrix from moving coordinate system of pinion to moving coordinate system of shaper.

    The envelope condition between spur pinion and shaper is expressed as

    Therefore,the equation of contact points on the surfaceΣfis expressed as

    The numerical simulations of position of contact points on tooth profile of face gear drive with processing error of misalignment of offset and obliquity are shown in Figs.7,8,respectively.

    According to Figs.7(a,b),the position of contact points on tooth profile of face gear will be changed with the tooth profile of face gear with processing error of misalignment of offset,but the relative position is not sensitive to the misalignment of offset.The signs″△″″*″and″+″represent the position of contact points when the parameters aand bare 0.3,0and-0.3mm,respectively.

    Fig.7 Contact points of face gear with machining error of misalignment of deflection

    According to Figs.8(a,b),the position of contact points on tooth profile of face gear will be changed with the tooth profile of face gear with machining error of misalignment of obliquity,but the relative position is not sensitive to the misalignment of obliquity.The signs″△″″*″and″+″represent the position of contact points when the parametersεaandεbare 0.3°,0°and -0.3°,respectively.

    Compared with the change of various types of processing errors,the contact points of face gear drive move with the teeth profile which are processed with processing error of misalignment of offset,and the relative position keep invariant;the contact points of face gear drive will change with deformation of the tooth profile of face gear which are processed with processing error of misalignment of obliquity,and the relative position of contact points are changed a little.

    Fig.8 Contact points of face gear with machining error of misalignment of obliquity

    According to the above analysis and Fig.8,the position of contact points of face gear drive will have a tiny change with the face gear which is processed by shaper cutter with the setting error.The pressure along axis″X″is zero in face gear drive.Therefore,the tiny change of contact points will not effect the transmission characteristics of face gear drive.At these parameters,the maximum error of influence of setting error of tool on position of contact points is 0.73%.

    4 Conclusions

    Based on the performed research,the following conclusion might be drawn:

    (1)The influence of obliquity error on tooth profile is bigger than offset error,and the offset error will make the profile of face gear translation,the obliquity error will make the profile of face gear deformation,but the influence are all tiny.

    (2)The processing error will make the position of contact points moving with the tooth profile of face gear,but the relative position change a little.

    In conclusion,the tooth profile and position of contact points of face gear drive are not sensitive to the processing error.

    [1] Litvin F L,Zhang Y,Wang J C,et al.Design an geometry of face-gear drives [J].Transactions of ASME,1992,114(12):642-647.

    [2] Litvin F L,Egelja A.Handbook on face gear drive with a spur involute pinion[R].NASA-CR-2000-209909,2000.

    [3] Chung T D,Chang S H.The undercutting and pointing of face gear[J].Journal of the Chinese Institute of Engineerings,1998,21(2):181-188.

    [4] Litvin F L,Ignacio Gonzalez-Perez,Alfonso Fuentes,et al.Design,generation and stress analysis of facegear drive with helical pinion[J].Computer Method in Applied Mechanics and Engineering,2005,194:3870-3901.

    [5] Litvin F L,Alfonso Fuentes,Claudio Zanzi,et al.Face gear drive with spur involute pinion:Geometry,generation by a worm,stress analysis[J].Computer Method in Applied Mechanics and Engineering,2002,191(25/26):2785-2813.

    [6] Heath G F,F(xiàn)iller R R,Tan Jie.Development of face gear technology for industrial and aerospace power transmission[R].NASA/CR-2002-211320,2002.

    [7] Claudio Zanzi,Pedrero J I.Application of geometry of face gear drive[J].Computer Methods in Applied Mechanics and Engineering,2005,194:3047-3066.

    [8] UlrichKissling,Stefan Beermann.Face gears:Geometry and strength[M].USA:Gear Technology,2007:54-61.

    [9] Zhu Rupeng,Pan Shengcai.Current state and development of research on face gear drive[J].Journal of Nanjing University of Aeronautics & Astronautics,1997,29(3):385-361.(in Chinese)

    [10]ZhaoNing,Liu Changqing.Study on grinding machine of face gears[J].Machinery Design & Manufacture,2007,10(10):151-152.(in Chinese)

    [11]Guo Hui,Zhao Ning,F(xiàn)ang Zongde,et al.Research on bending strength of face-gear transmission based on contact finite element method[J].Journal of Aerospace Power,2008,23(8):1438-1442.(in Chinese)

    [12]Li Zhengminqing,Zhu Rupeng.Process method of face-gear drive with spur involute pinion with the shaping machine[J].Journal of Chongqing University,2007,30(5):55-58.(in Chinese)

    [13]Li Zhengminqing,Zhu Rupeng.A study of worm of hobbing or grinding wheel for face gear[J].Mechanical Science and Technology for Aerospace Engineering,2009,28(1):98-101.(in Chinese)

    [14]Wang Yanzhong,Wu Canhui,Ge Xuyang,et al.Basal worm-designing method of face-gear hob[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):166-169.(in Chinese)

    天天一区二区日本电影三级| 亚洲男人的天堂狠狠| 真人做人爱边吃奶动态| 少妇的逼水好多| 九九在线视频观看精品| 五月伊人婷婷丁香| 国产伦人伦偷精品视频| 老司机午夜十八禁免费视频| 搡老熟女国产l中国老女人| 欧美一区二区精品小视频在线| 免费电影在线观看免费观看| www.www免费av| 午夜成年电影在线免费观看| 国内精品一区二区在线观看| 午夜免费成人在线视频| 成人特级av手机在线观看| 亚洲欧美日韩高清专用| 可以在线观看毛片的网站| 夜夜看夜夜爽夜夜摸| 精品国产三级普通话版| 嫩草影院入口| 国产综合懂色| 熟女电影av网| 亚洲国产看品久久| 亚洲精华国产精华精| 91麻豆av在线| 免费无遮挡裸体视频| 97人妻精品一区二区三区麻豆| 天天添夜夜摸| 欧美3d第一页| 亚洲国产精品合色在线| 中文字幕人成人乱码亚洲影| 亚洲欧美日韩卡通动漫| 国产美女午夜福利| 99久久99久久久精品蜜桃| 日韩人妻高清精品专区| 国产亚洲欧美在线一区二区| 非洲黑人性xxxx精品又粗又长| 一级毛片精品| 婷婷精品国产亚洲av在线| www.999成人在线观看| 18禁裸乳无遮挡免费网站照片| 色尼玛亚洲综合影院| 精品福利观看| 国产高清激情床上av| 最近最新中文字幕大全免费视频| 91麻豆av在线| av天堂中文字幕网| 97超视频在线观看视频| 欧美一区二区国产精品久久精品| 欧美在线一区亚洲| 日韩欧美免费精品| 久久精品aⅴ一区二区三区四区| 黄片小视频在线播放| 波多野结衣高清作品| 男女床上黄色一级片免费看| 国产精品久久久人人做人人爽| 十八禁网站免费在线| 长腿黑丝高跟| 老汉色av国产亚洲站长工具| 亚洲激情在线av| 欧美黑人欧美精品刺激| 九九久久精品国产亚洲av麻豆 | 国产三级黄色录像| 亚洲av电影在线进入| 久久久久久久精品吃奶| 亚洲精华国产精华精| 久久久国产成人免费| 精品一区二区三区视频在线 | 后天国语完整版免费观看| 男女视频在线观看网站免费| 51午夜福利影视在线观看| 男女之事视频高清在线观看| 最近最新中文字幕大全免费视频| 色播亚洲综合网| 久久亚洲真实| 中国美女看黄片| 观看美女的网站| 狠狠狠狠99中文字幕| 成人无遮挡网站| 精品久久久久久久末码| 舔av片在线| 性色av乱码一区二区三区2| 少妇裸体淫交视频免费看高清| 久久久久久久午夜电影| 国产精品九九99| 90打野战视频偷拍视频| 天天添夜夜摸| 亚洲精品中文字幕一二三四区| 欧美zozozo另类| 波多野结衣高清作品| 久久99热这里只有精品18| av欧美777| 日韩欧美三级三区| 亚洲无线在线观看| 成在线人永久免费视频| 亚洲狠狠婷婷综合久久图片| 亚洲七黄色美女视频| 久久久久九九精品影院| 午夜激情欧美在线| 高清在线国产一区| 国产伦一二天堂av在线观看| 国内精品美女久久久久久| 久久婷婷人人爽人人干人人爱| 亚洲精品国产精品久久久不卡| 俺也久久电影网| 性欧美人与动物交配| 高潮久久久久久久久久久不卡| 国产精品乱码一区二三区的特点| 久久久久久九九精品二区国产| 日本与韩国留学比较| 国产欧美日韩一区二区三| 久久久久久久久久黄片| 我要搜黄色片| 午夜精品久久久久久毛片777| 老司机福利观看| 亚洲欧美精品综合久久99| 成人三级做爰电影| 亚洲精品乱码久久久v下载方式 | 免费观看的影片在线观看| 一本一本综合久久| 午夜精品久久久久久毛片777| 久9热在线精品视频| 日韩高清综合在线| 麻豆成人av在线观看| 欧美三级亚洲精品| 国产三级在线视频| 欧美午夜高清在线| 久久久水蜜桃国产精品网| 90打野战视频偷拍视频| 黄色视频,在线免费观看| 午夜福利视频1000在线观看| 国产亚洲欧美98| 亚洲在线自拍视频| 中文字幕久久专区| 国产激情偷乱视频一区二区| 成人永久免费在线观看视频| 看黄色毛片网站| 国内精品久久久久精免费| 天堂影院成人在线观看| 好男人在线观看高清免费视频| 99riav亚洲国产免费| 无人区码免费观看不卡| 中文字幕精品亚洲无线码一区| 性色avwww在线观看| 在线观看日韩欧美| 亚洲一区高清亚洲精品| 婷婷丁香在线五月| 亚洲第一电影网av| 欧美极品一区二区三区四区| 成熟少妇高潮喷水视频| 欧美极品一区二区三区四区| 夜夜夜夜夜久久久久| 午夜激情欧美在线| 日韩有码中文字幕| 国内精品久久久久久久电影| 国产97色在线日韩免费| 两个人看的免费小视频| 一级毛片女人18水好多| 窝窝影院91人妻| 人人妻人人看人人澡| 成人高潮视频无遮挡免费网站| 国产精品一区二区三区四区免费观看 | 法律面前人人平等表现在哪些方面| 国产人伦9x9x在线观看| 黄片大片在线免费观看| 久久久久国内视频| 一个人观看的视频www高清免费观看 | 欧美av亚洲av综合av国产av| 丁香欧美五月| 久久亚洲精品不卡| 波多野结衣高清作品| 在线观看美女被高潮喷水网站 | 99久久综合精品五月天人人| 夜夜夜夜夜久久久久| 日韩欧美在线二视频| av黄色大香蕉| 亚洲第一电影网av| 久久热在线av| 日日摸夜夜添夜夜添小说| 国内精品一区二区在线观看| 国产精品亚洲一级av第二区| 日韩免费av在线播放| www.自偷自拍.com| 少妇人妻一区二区三区视频| 在线观看一区二区三区| 草草在线视频免费看| 亚洲av免费在线观看| 亚洲熟妇中文字幕五十中出| 亚洲精品美女久久av网站| 噜噜噜噜噜久久久久久91| 18禁美女被吸乳视频| 给我免费播放毛片高清在线观看| 日本黄色片子视频| 精品午夜福利视频在线观看一区| 中文在线观看免费www的网站| 国产伦精品一区二区三区四那| 亚洲色图av天堂| 亚洲国产高清在线一区二区三| 国产三级中文精品| 国产乱人视频| 亚洲自拍偷在线| 巨乳人妻的诱惑在线观看| 国产精品免费一区二区三区在线| 久久久久久国产a免费观看| 亚洲成av人片免费观看| 中文字幕最新亚洲高清| 国产伦在线观看视频一区| 精品国产超薄肉色丝袜足j| 成人三级黄色视频| 亚洲18禁久久av| 日日干狠狠操夜夜爽| 亚洲成a人片在线一区二区| 91在线观看av| 久久精品人妻少妇| 亚洲av美国av| 亚洲国产欧美一区二区综合| 久久这里只有精品19| 久久午夜综合久久蜜桃| 成人国产综合亚洲| 国产真人三级小视频在线观看| 极品教师在线免费播放| 国产日本99.免费观看| 中文字幕高清在线视频| 三级国产精品欧美在线观看 | 午夜福利免费观看在线| 日本 欧美在线| 婷婷丁香在线五月| 国产99白浆流出| 精品免费久久久久久久清纯| 在线国产一区二区在线| 长腿黑丝高跟| 最近最新中文字幕大全电影3| 国产三级在线视频| 久久久国产成人免费| 欧美精品啪啪一区二区三区| 麻豆国产97在线/欧美| 国产成人啪精品午夜网站| 日韩人妻高清精品专区| 男人和女人高潮做爰伦理| 日韩精品中文字幕看吧| 90打野战视频偷拍视频| 制服人妻中文乱码| 日本 av在线| 免费在线观看亚洲国产| 欧美一区二区精品小视频在线| 老鸭窝网址在线观看| 亚洲午夜理论影院| 欧美黄色片欧美黄色片| 法律面前人人平等表现在哪些方面| 亚洲av成人不卡在线观看播放网| 亚洲色图 男人天堂 中文字幕| 亚洲午夜精品一区,二区,三区| 久久久国产精品麻豆| 国产又黄又爽又无遮挡在线| 午夜a级毛片| aaaaa片日本免费| 亚洲精品在线美女| 国模一区二区三区四区视频 | 午夜福利在线观看吧| 欧美乱色亚洲激情| 久久久水蜜桃国产精品网| 日本在线视频免费播放| 啦啦啦免费观看视频1| 狂野欧美白嫩少妇大欣赏| 中文亚洲av片在线观看爽| 搡老妇女老女人老熟妇| 91九色精品人成在线观看| 亚洲国产欧洲综合997久久,| 国产成人啪精品午夜网站| 2021天堂中文幕一二区在线观| 最近在线观看免费完整版| 老熟妇乱子伦视频在线观看| 亚洲七黄色美女视频| 在线国产一区二区在线| 琪琪午夜伦伦电影理论片6080| 国产 一区 欧美 日韩| 国产一区在线观看成人免费| 又爽又黄无遮挡网站| 日韩人妻高清精品专区| 亚洲国产色片| 日本黄大片高清| 精品久久久久久久末码| 一个人看的www免费观看视频| 亚洲九九香蕉| 日韩欧美在线乱码| 欧美日韩中文字幕国产精品一区二区三区| 啦啦啦韩国在线观看视频| 免费av毛片视频| 久久久久国产一级毛片高清牌| 男人舔奶头视频| 好男人在线观看高清免费视频| av福利片在线观看| 一个人观看的视频www高清免费观看 | 国产男靠女视频免费网站| 麻豆国产av国片精品| 欧美日韩综合久久久久久 | 久久久精品大字幕| 99久久精品热视频| 色尼玛亚洲综合影院| 18禁黄网站禁片免费观看直播| 老司机午夜十八禁免费视频| 午夜福利高清视频| 日韩有码中文字幕| 精品国产超薄肉色丝袜足j| 日本 欧美在线| 成人高潮视频无遮挡免费网站| 舔av片在线| 日日摸夜夜添夜夜添小说| 深夜精品福利| 日本一本二区三区精品| 88av欧美| 天堂网av新在线| 午夜免费观看网址| 日韩欧美国产在线观看| 欧美午夜高清在线| 欧美大码av| 久久精品国产亚洲av香蕉五月| 亚洲第一欧美日韩一区二区三区| 91av网一区二区| av片东京热男人的天堂| 亚洲一区二区三区色噜噜| 偷拍熟女少妇极品色| 国产成人欧美在线观看| 免费看光身美女| 97人妻精品一区二区三区麻豆| 一个人免费在线观看电影 | 村上凉子中文字幕在线| 国产黄色小视频在线观看| 在线播放国产精品三级| ponron亚洲| 香蕉国产在线看| 日韩中文字幕欧美一区二区| 俺也久久电影网| 久久国产精品影院| 高清毛片免费观看视频网站| 亚洲电影在线观看av| 欧美成人一区二区免费高清观看 | 真人一进一出gif抽搐免费| 亚洲熟女毛片儿| 麻豆av在线久日| 国产乱人伦免费视频| 欧美zozozo另类| 欧美精品啪啪一区二区三区| 欧美在线一区亚洲| 免费av不卡在线播放| 色播亚洲综合网| 欧美日韩瑟瑟在线播放| 日韩av在线大香蕉| 黄色成人免费大全| 俺也久久电影网| 精品不卡国产一区二区三区| 男人的好看免费观看在线视频| 久久国产精品影院| 男插女下体视频免费在线播放| 国产精品亚洲一级av第二区| 美女cb高潮喷水在线观看 | 精品一区二区三区四区五区乱码| 国产男靠女视频免费网站| 老司机午夜十八禁免费视频| 无遮挡黄片免费观看| 欧美3d第一页| 国产一区二区在线观看日韩 | 亚洲av成人精品一区久久| 99热只有精品国产| 国产探花在线观看一区二区| 欧美日韩中文字幕国产精品一区二区三区| 亚洲av成人一区二区三| 成在线人永久免费视频| 亚洲第一电影网av| 精品电影一区二区在线| 狠狠狠狠99中文字幕| 午夜成年电影在线免费观看| 人妻夜夜爽99麻豆av| 综合色av麻豆| 特大巨黑吊av在线直播| 亚洲成人免费电影在线观看| 极品教师在线免费播放| 国产精品 欧美亚洲| 亚洲 国产 在线| 日本 欧美在线| 麻豆一二三区av精品| 久久亚洲精品不卡| 99精品久久久久人妻精品| 国产精品乱码一区二三区的特点| 天堂动漫精品| 91麻豆av在线| 一区二区三区高清视频在线| 99国产精品一区二区蜜桃av| 一级毛片女人18水好多| 搡老岳熟女国产| 熟女人妻精品中文字幕| 午夜福利在线在线| 国产又色又爽无遮挡免费看| 成人18禁在线播放| 亚洲18禁久久av| 国产探花在线观看一区二区| 国产精品爽爽va在线观看网站| 国产亚洲精品av在线| 免费看美女性在线毛片视频| 曰老女人黄片| 男人的好看免费观看在线视频| 精品国产超薄肉色丝袜足j| 禁无遮挡网站| 黄色 视频免费看| 国产成人aa在线观看| 欧美又色又爽又黄视频| 精品久久蜜臀av无| 色综合亚洲欧美另类图片| 观看免费一级毛片| 国产三级黄色录像| 国产伦在线观看视频一区| 亚洲七黄色美女视频| 亚洲色图av天堂| 久久久久国内视频| 两个人的视频大全免费| 97超级碰碰碰精品色视频在线观看| 久久久国产欧美日韩av| 欧洲精品卡2卡3卡4卡5卡区| 久久中文看片网| 看免费av毛片| 欧美性猛交╳xxx乱大交人| 老司机深夜福利视频在线观看| 69av精品久久久久久| 一二三四在线观看免费中文在| 男插女下体视频免费在线播放| 免费在线观看影片大全网站| 日本撒尿小便嘘嘘汇集6| 天天躁狠狠躁夜夜躁狠狠躁| 成人18禁在线播放| 国产av不卡久久| 亚洲av片天天在线观看| 国产成人精品无人区| 日本成人三级电影网站| 在线观看日韩欧美| 亚洲欧美日韩无卡精品| 高清在线国产一区| 九色成人免费人妻av| netflix在线观看网站| 51午夜福利影视在线观看| 一个人看的www免费观看视频| 十八禁人妻一区二区| 亚洲成人久久性| 日本撒尿小便嘘嘘汇集6| 精华霜和精华液先用哪个| 成人18禁在线播放| 九色成人免费人妻av| 中文资源天堂在线| 天天躁日日操中文字幕| 免费在线观看影片大全网站| 欧美丝袜亚洲另类 | 黄色丝袜av网址大全| 欧美黑人欧美精品刺激| 亚洲午夜理论影院| 一个人观看的视频www高清免费观看 | 免费电影在线观看免费观看| 真人做人爱边吃奶动态| 91在线精品国自产拍蜜月 | 黄片小视频在线播放| 可以在线观看毛片的网站| 久久中文字幕一级| 三级男女做爰猛烈吃奶摸视频| 后天国语完整版免费观看| 99国产极品粉嫩在线观看| 色综合欧美亚洲国产小说| 啦啦啦韩国在线观看视频| 欧美黑人欧美精品刺激| 丰满人妻熟妇乱又伦精品不卡| 色综合亚洲欧美另类图片| 免费在线观看日本一区| 观看美女的网站| av天堂中文字幕网| 可以在线观看的亚洲视频| 欧美av亚洲av综合av国产av| 久久午夜综合久久蜜桃| 精品久久久久久久毛片微露脸| 亚洲国产精品合色在线| 久久午夜亚洲精品久久| 无遮挡黄片免费观看| 黄色丝袜av网址大全| 麻豆国产97在线/欧美| 午夜日韩欧美国产| 久久久久久久精品吃奶| 麻豆久久精品国产亚洲av| 国产亚洲欧美98| 黄色女人牲交| 天堂av国产一区二区熟女人妻| av在线天堂中文字幕| 婷婷亚洲欧美| 桃红色精品国产亚洲av| 一区二区三区高清视频在线| 性欧美人与动物交配| 99久久精品热视频| 最近最新中文字幕大全电影3| 色吧在线观看| 真人做人爱边吃奶动态| 免费搜索国产男女视频| 制服丝袜大香蕉在线| 亚洲国产日韩欧美精品在线观看 | 午夜福利成人在线免费观看| www.999成人在线观看| 国产伦在线观看视频一区| 亚洲精品久久国产高清桃花| 波多野结衣高清无吗| 欧洲精品卡2卡3卡4卡5卡区| 成年女人永久免费观看视频| 亚洲av五月六月丁香网| 操出白浆在线播放| 一a级毛片在线观看| 怎么达到女性高潮| 舔av片在线| 国产精品一区二区精品视频观看| 可以在线观看的亚洲视频| 91麻豆av在线| 97人妻精品一区二区三区麻豆| 午夜久久久久精精品| 九九热线精品视视频播放| 老熟妇乱子伦视频在线观看| 久久午夜亚洲精品久久| 亚洲成人精品中文字幕电影| 高清在线国产一区| a级毛片a级免费在线| 日韩精品中文字幕看吧| 99在线视频只有这里精品首页| 无遮挡黄片免费观看| 国产人伦9x9x在线观看| 国产精品爽爽va在线观看网站| 老熟妇乱子伦视频在线观看| 成人av在线播放网站| 18禁黄网站禁片免费观看直播| 两个人看的免费小视频| 叶爱在线成人免费视频播放| 午夜两性在线视频| 色视频www国产| 欧美午夜高清在线| 91在线观看av| a在线观看视频网站| 国产av在哪里看| av黄色大香蕉| 亚洲性夜色夜夜综合| 小说图片视频综合网站| 很黄的视频免费| 色综合亚洲欧美另类图片| 少妇的逼水好多| 欧美黑人巨大hd| 嫩草影视91久久| 黄色丝袜av网址大全| 天天添夜夜摸| 亚洲 欧美 日韩 在线 免费| 狂野欧美激情性xxxx| 一二三四社区在线视频社区8| 少妇熟女aⅴ在线视频| 99精品久久久久人妻精品| avwww免费| 亚洲中文日韩欧美视频| www.www免费av| 色在线成人网| 啦啦啦观看免费观看视频高清| 最近最新中文字幕大全免费视频| 国产精品综合久久久久久久免费| 午夜成年电影在线免费观看| 久久久精品欧美日韩精品| 色老头精品视频在线观看| 男女视频在线观看网站免费| 久久精品91蜜桃| 18禁黄网站禁片午夜丰满| 久久人人精品亚洲av| 欧美日韩亚洲国产一区二区在线观看| 草草在线视频免费看| av黄色大香蕉| 亚洲18禁久久av| 一区二区三区国产精品乱码| 99国产精品一区二区蜜桃av| 亚洲国产日韩欧美精品在线观看 | 99精品欧美一区二区三区四区| 精品久久久久久久久久免费视频| 丰满人妻一区二区三区视频av | 久久精品国产99精品国产亚洲性色| 老汉色∧v一级毛片| 国产成人aa在线观看| 最好的美女福利视频网| 成年女人毛片免费观看观看9| 亚洲片人在线观看| www.精华液| 精品国产美女av久久久久小说| 男女那种视频在线观看| 97超视频在线观看视频| 国产在线精品亚洲第一网站| 国产高清视频在线观看网站| 欧美最黄视频在线播放免费| 噜噜噜噜噜久久久久久91| 免费在线观看视频国产中文字幕亚洲| 久久精品91无色码中文字幕| av福利片在线观看| 好男人在线观看高清免费视频| av天堂在线播放| 国产成人av激情在线播放| 91久久精品国产一区二区成人 | 两人在一起打扑克的视频| 巨乳人妻的诱惑在线观看| 国产精品自产拍在线观看55亚洲| 看黄色毛片网站| 成人午夜高清在线视频| 国产亚洲精品久久久久久毛片| 97超级碰碰碰精品色视频在线观看| 久久亚洲精品不卡| 国产伦精品一区二区三区四那| 搡老妇女老女人老熟妇| 午夜两性在线视频| 国产麻豆成人av免费视频| 色噜噜av男人的天堂激情| 中文字幕最新亚洲高清| 欧美一区二区国产精品久久精品| 手机成人av网站| 国产亚洲精品久久久com|