韓運濤

摘要：預埋鐵座軌枕一般用于重載鐵路的鋪設。預埋鐵座枕的生產難度遠高于較普通預留孔軌枕及預埋套管軌枕，由于其預埋鐵座部分突出于軌枕頂面，在預應力放張時，鐵座與模具間會發生位移，故預埋鐵座固定裝置必須使鐵座與殼體間存在縫隙，或采用柔性可壓縮材料，為鐵座與模具間留有一定伸縮量。預埋鐵座的設計形式，使得生產此類軌枕時，定位精度與預埋鐵座周?chē)拿芊獬蔀橹饕y點;現有定位方式雖能滿足預埋鐵座的定位精度，但密封性較差，預埋鐵座周?chē)炷恋耐庥^質量較差;另一突出的問題是預埋鐵座軌枕的生產效率較低，人工成本浪費嚴重。本文將圍繞預埋鐵件定位裝置的改進研究，提供解決現有定位方式生產效率低下，鐵座周邊外觀質量差的新思路，從而為所有預埋鐵座軌枕生產提供一種，生產效率更高，成本進一步降低，外觀質量更好的生產方式。

Abstract： The embedded iron seat sleeper is generally used for the laying of heavy-duty railway. The production difficulty of the embedded iron seat sleepers is much higher than that of the ordinary reserved hole sleepers and the embedded sleeve sleepers. Because the embedded iron seat part protrudes from the top of the sleepers， there will be displacement between the iron seat and the mold when the prestress is released， the fixed device of the embedded iron seat must keep the gap between the iron seat and the shell， or use flexible and compressible materials to leave a certain amount of expansion between the iron seat and the mold. The design form of the embedded iron seat makes the positioning accuracy and the sealing around the embedded iron seat become the main difficulties in the production of such sleepers; although the existing positioning method can meet the positioning accuracy of the embedded iron seat， it has poor sealing performance and poor appearance quality of the concrete around the embedded iron seat; another prominent problem is the low production efficiency of the embedded iron seat sleepers and serious waste of labor costs. This paper will focus on the improvement of the positioning device of embedded iron parts， and provide a new idea to solve the low production efficiency and poor appearance quality of the existing positioning mode， so as to provide a production mode with higher production efficiency， further cost reduction and better appearance quality for the production of all embedded iron seat sleepers.

關鍵詞：預埋鐵座定位裝置設計;生產效率;外觀質量;節約成本

0? 引言

目前行業內采用的預埋鐵座固定裝置，均采用柔性可壓縮材料方式，使用此裝置的拆、裝工藝步驟較多，整套拆裝工藝占用行車較多，生產效率低;用于密封的膠圈損耗量大，人工用量大，成本高;因膠圈損壞變形導致預埋鐵座周?chē)炷涟纪共黄?，外觀質量差。本文將通過總結以往定位裝置的缺點分析，通過設計新形式定位裝置，解決預埋鐵座軌枕生產效率低、成本高、外觀質量差的一系列問題。埋入式長枕產品如圖1所示。

1? 現有定位裝置存在的問題

1.1 生產效率低

由于預埋件與定位裝置間沒有縫隙，摩擦力大，脫模只能用行車吊住單根軌枕，然后用錘敲擊，緩慢將軌枕吊起，吊起過快易造成枕開裂產生廢品，每模枕脫模時間不少于20分鐘。

膠圈變形、損壞，灰漿粘在膠圈凹槽，不清理干凈無法進行預埋件安裝，清理工作非常耗費時間，膠圈清理、更換時間不少于20分鐘。

預埋件頂絲位置空間狹小，不能采用電動工具提升裝、卸效率，且數量很多，每模8根枕;每根枕4個預埋鐵座，每個鐵座2條頂絲，每模共有頂絲64條，均需用普通扳手拆除，4人拆除需、安裝共需20分鐘。預埋件頂絲如圖2所示。

預埋件安裝后，須由質檢人員逐根對預埋件的大小軌距進行測量檢驗，合格后進行最后緊固，每模耗費時間不小于15分鐘。