耿克達，周 軍，林 鵬

（西北工業大學精確制導與控制研究所，西安 710072）

變質心再入飛行器自抗擾控制器設計*

耿克達，周 軍，林 鵬

（西北工業大學精確制導與控制研究所，西安 710072）

再入飛行器采用變質心控制不但可以保持較好的氣動外形，還町以增大機動能力，但變質心控制較強的非線性和耦合性大大增加了控制系統設計難度，使控制器設計和實施的代價較高。針對這一問題，基于自抗擾控制技術，設計了變質心再入飛行器雙通道解耦控制器。通過構造連續光滑擴張狀態觀測器，不加區分飛行器的各類干擾與耦合，對其統一進行估計：利用非線性狀態反饋控制律，并自適應調節控制參數對其進行補償，實現對飛行器姿態的解耦控制。仿真結果表明：該方法大大降低了對系統模型精度的要求與控制器設計實施代價，對變質心再入飛行器非線性、耦合性以及參數攝動具有較強的魯棒性。

變質心再入飛行器，自抗擾控制，解耦，擴張狀態觀測器

Introduction

By changing the centroid of the vehicle system, moving mass control［1-3］，which is a new orbital transfer technology of vehicle,makes use of the aerodynamic force and torque caused by high velocity to control the attitude.

However，because of centroid movement，the inertial axes of vehicle are changed.At the same time，the disturb torque and control coupling caused by mass block make the MmRV more serious coupling，nonlinear and model uncertain，which increases the difficulty for control system design［1-2］.Ref［4］studied the de sign of H∞ robust controller for mass moment inter-ceptor；Ref［5］using the Bang-Bang control and sliding mode control to design the reentry vehicle mass moment compound control system；Ref［6］adopted double loop sliding mode control to design the high performance controller for spin warhead，and analyzed the stability of system by using Lyapunov function.However，these methods need to craft more state feedback，or uncertain perturbation boundary information，which makes the cost of controller design and implementation higher.

Thus，in order to solve the conflict between the performance and the cost of moving mass controller，the paper designs the double channels decoupling controllers base on Active disturbance rejection control（ADRC）technology.

ADRC proposed by Han Jing-qing is a new control technology for uncertain system.It takes system inner disturbance perturbation of model and parameters and unmeasured external disturbance as the unknown“total disturbance”，which is estimated and compensated to enhance the robustness of control system in real time by applying extended state observer（ESO）.By this way，ADRC greatly reduces the requirement of model precision and the cost of controller design.

The paper at first gives the vehicle control model；then estimates the coupling，inertial disturbance and parameters perturbation together by constructing the continuous smooth extended state observer；at last implements the compensation for disturbances of each channel and decoupling control for vehicle by utilizing nonlinear state error feedback law and actively adjusting the control parameters.Simulation verifies the efficiency of the method.

1 Model of MmRV

Selecting the reentry coordinate Oexeyezeas the inertial reference coordinate system for the movement of MmRV，the body coordinate Obxbybzbas the reference coordinate system for the attitude movement of MmRV. C is the vehicle shell（excluding the MmA）centroid，S is the overall centroid of the reentry vehicle system（including the MmA），msis the total mass；Reentry vehicle adopts two-dimension MmA，which is composed by two sliding mass blocks that can move along the vertical and horizontal axis of vehicle respectively.While the pitch and yaw channels are controlled by MmA，the roll stability is controlled by other actuator of vehicle.The mass of two blocks are mAand mB，the centroids expressed in body coordinate are rCA=（la，ly，0）T，rCB=（lb，0，lz）T.

Ignoring the moment inertia of MmA，the dynamic equations based on vehicle centroid C are expressed as eq.1.

In eq.1，

2 Design of ARDC

2.1 Model Transformation

In view of the model eq.1，taking the channel coupling and the inertia product caused by MmA as the unknown disturbances，and extracting the main control variables of each channel to transform the model.Since the MmA in the paper only controls the pitch and yaw channels，we extract the two channels rotation equations as eq.3.

Where，fβ0，fα0are the nonlinear functions including the parameters of vehicle overall，aerodynamic and MmA.Selecting the state variables as，control variables as，the differential equations are：

Making derivation to eq.4，and considering the model uncertainty of system，the control model of pitchand yaw channels can be obtained as eq.5.

Where，

Eq.5 shows that there are serious nonlinear，coupling and time-variable characteristics in MmRV. Considering the control system robustness and design cost，the paper applies the ARDC technology，taking the coupling and all kinds of perturbation as unknown"total disturbance"of each channel indiscriminately，which is estimated and compensated by extended state observer，to design the double channels active disturbance rejection controllers（ADRCs）independently.

2.2 Structure of double channels ADRCs

The structure of double channels ADRCs for Mm RV is shown in Fig.1，where，is the MmA servo system.

Fig.1 Structure of double channels ADRC for MmRV

It is shown in Fig.1 that the ADRC is composed of 3 parts mainly：tracking differentiator（TD），extended state observer（ESO）and nonlinear state error feedback（NLSEF）［7］.TD is used to arrange the transient dy namics for command signal，from which we could obtain the smooth input signal and its differential signal for the controller.ESO is used to estimate the"total disturbances"of each channels，which is compensated by NLSEF.By this way，ADRCs implements the decou pling control of pitch and yaw channels，so the controllers could be designed independently.

2.3 The separate design of ADRC

Since the 3 parts of ADRC have special effect and physical signification，every parts could be designed separately.Consider that the control mechanism of pitch and yaw channels is similar，the paper only introduces the ADRC design of pitch channel.

（1）TD：The input of TD is attack angle command αc.It applies 2 outputs：smooth tracking signal v1of command and its differential signal v2.Arranging the transient dynamics for command signal by TD restrains the system overshoot and noise affect.The discrete algorithm of pitch channel TD is shown in eq.7.

where，h0is filter parameter.Increasing h0will enhance the filter performance.r is the control parameter that is adjusted according to system tracking ability and used to regulate risetime of transient dynamics.

（2）ESO：For pitch channel，ESO applies 3 outputs：z1，z2and z3.z1，z2are the tracking signal and differential signal of vehicle attack angle respectively，z3is the estimative value of pitch channel total disturbances fα1.ESO，which could estimate the system disturbances well，is the core of ADRC technology.Using appropriate measure to compensate the estimative value of ESO can enhance the tracking capability and robustness of control system.The discrete algorithm of pitch channel is s hown in eq.8.

where，β01，β02，β03，β01，β02，δ are the control parameters that determine the estimate precision together.u（k）is the measurable output of MmA servo system. Generally，a01=0.5，a02=0.25，β01，β02，β03could be adjusted according to the sampling step and correlative design rules.

In eq.8，nonlinear function fal（e，a，δ）makes great effect to the capabilities of ESO and ARDC.On the one hand，since fal（e，a，δ）is non-derivable，smaller δ will cause the derivative mutation of function and high-frequency flutter，which debases the control character；on the other hand，bigger δ will debase the precision of estimate and control［8］.Therefore，the paper improves the linear part of fal（e，a，δ）to a continuous finite differentiable function fal（e，a，δ）.

To make sure the function continuous differentiable，there are

Solving the eq.9 and eq.10 simultaneously，the function is obtained as

Fig.2 Compared curves of fal（·）and falx（·）

The simulation curves of fal（·）and falx（·）are shown in Fig.2.It shows that falx（·）is smooth and differentiable，which could be sued to avoid high-frequency flutter effectively.More than that，falx（·）still satisfies the characteristic that"large error with small gain，small error with large gain"，which could be used to restrain the system error.

（3）NLSEF：Compared with linearstate error feedback，NLSEF could obtain more efficient control effect.It restrains and compensates the system error quickly，which avoid the negative effect of integral of PID.The discrete algorithm of NLSEF in the paper is shown in eq.12.

where，the expression of falx（·）is shown in eq.11. β1，β2，a1，a2are control parameters and a1＜1＜a2.u0（k）is the virtual equivalent control law.Introducing the disturbances compensation，the final real control v ariable is obtained as

Bringing eq.13 into eq.5，closed loop system i s expressed as

According to Ref［7］，above system is proved to be steady.For improving the control capability，the paper adjusts the control parameters by utilizing the system error as

Where，E is the absolute value of maximum static error at given signal.Eq.14 shows that，when the error increases，β1will increase to enhance the system rapidity；when the error decreases，β2will decrease to enhance the control precision.

Above all，for pitch channel ARDC，it is not necessary to obtain the precise system or external disturbance model，instead simply acknowledging α and output of MmA u is good enough.By this way，we greatly reduce the costofcontrolsystem design and implementation.

3 Simulation Results

In order to demonstrate the effectiveness of the ADRCs proposed in the paper，taking a feature point of certain MmRV for instance to simulate the control for double channels.The parameters of vehicle and MmA are shown in Tab.1 and Tab.2，where，Lrf，Srfare the reference length and area of vehicle.

Tab.1 Parameters of vehicle

Tab.2 Parameters of moving mass actuator

The maximum aerodynamic perturbation is 20%，the maximum mass perturbation is 2%.Partial control parameters of pitch channel are shown below.

The tracking curves of attack angle and sideslip angle of nominal model and perturbation model are shown in fig.3，fig.4.

Fig.3 Tracking curves of attack angle

Fig.4 Tracking curves of sideslip angle

The simulation results show that：

（1）in the nominal case，attack angle and sideslip angle could track the commands signal quickly without overshoot，system has good dynamic quality and higher tracking precision，each channel's static error is less than 0.6%；

（2）in the case of a wide range of parameters perturbation，the tracking performance of each channel has barely changed.the control system shows strong robustness.

In order to verify the effectiveness of ESOs，the estimative values and real values of total disturbance of each channel are shown in fig.5，fig.6.The curves show that ESOs have high estimated precision and good tracking performance.

Fig.5 Disturbance estimate curves of pitch channel

Fig.6 is the moving curves of sliding masses of double channels.The curves show that the maxim displacements of sliding masses are 0.08 m，which means the Mmc has high effiency.

Fig.6 Disturbance estimate curves of yaw channel

4 Conclusion

（1）ADRC of MmRV has good dynamic quality，tracking precision and strong robustness for nonlinearity，coupling and parameters perturbation of vehicle；

（2）Using ADRC greatly reduces the requirement for model precision；

（3） Using ADRC reducesthe design and implementation cost of controller，which has certain engineering application value.

Reference：

［1］Woolsey C A.Reduced Hamiltonian Dynamics for a Rigid Body Coupled to a Moving Point Mass［J］.Journal of Guidance，Control，and Dynamics，2005，28（1）：131-138.

［2］Vaddi S S.Moving Mass Actuated Missile Control Using Convex Optimization Techniques［C］//AIAA Guidance，Naviga-

Active Disturbance Rejection Control for Moving Mass Reentry Vehicle

GENG Ke-da，ZHOU Jun，LIN Peng
（Institute of Precision Guidance and Control，Northwestern Polytechnical University，Xi'an 710072，China）

Moving mass reentry vehicle (MmRV)has better aerodynamic configuration and maneuverability.However，the serious nonlinearity and coupling of moving mass control greatly increases the difficulty of control system design，which makes the cost of controller design and implement higher.In order to solve this problem，in the paper we design a double channels decoupling controller of MmRV based on the Active disturbance rejection control technology.By constructing a continuous smooth extended state observer，the controller estimates all kinds of vehicle disturbance and coupling indiscriminately;then compensates the estimative value by utilizing nonlinear state error feedback and adaptively adjusting the controller parameters to implement the decoupling control of vehicle attitude.Simulation results show that this method not only greatly reduces the requirement for prevision of system model and the cost of controller design and implementation，but also has strong robustness for nonlinearity，coupling and parameter perturbation of MmRV.

moving mass reentry vehicle，active disturbance rejection control，decoupling，extended state observer

V448.12

A

1002-0640（2014）09-0126-05

2013-06-05

2013-09-03

高等學校博士學科點專項科研基金資助項目

耿克達（1985- ），男，河北石家莊人，博士研究生。研究方向：導航、制導與控制。