• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    第38 卷第3 期英文摘要

    2018-02-02 04:47:25
    振動、測試與診斷 2018年3期
    關(guān)鍵詞:英文

    ResearchonCuttingForceModelingandSurfaceQualityintheTransitionAreaoftheMosaicMold

    LIUXianli,GAOHaining,YUECaixu,JIANGNan
    (School of Mechanical and Power Engineering, Harbin University of Science and Technology Harbin, 150080, China)

    AbstractAiming at the problem of tool wear and breakage, the low accuracy of machined surface during the milling process of automobile panel splicing dies, the cutting force modeling of micro element is carried out. The cutting chip thickness of each cutting cycle is built as a function of the cutting angle and the shear force according to the different hardness of machining materials, and a plow force model are obtained under different cutting angles. By introducing a single-degree-of-freedom italic collision model, the Hopkinson test is used to obtain the elastic deformationδof the tool-workpiece impact under different spindle speeds, and then the impact force on the tool in the transition area is obtained. Combining above models together, the prediction model of milling force in the transition area can be obtained. Experiment and simulation results show a good consistency to prove the accuracy of the model. The surface quality under different feed directions is studied. From the analysis results of machined surface quality, surface roughness and height difference between workpieces, it is concluded that better surface quality can be obtained from high hardness and low hardness workpiece. The results provide theoretical support for the optimization of the milling process in the splicing die of the automobile panel.

    Keywordssplicing die; impact force model; cutting force model; surface quality

    GuidedWaveandEnhancedSplitMergeProbabilityModelBasedonDamageEvaluationMethod

    QIULei,FANGFang,YUANShenfang,MEIHanfei
    (State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics Nanjing, 210016, China)

    AbstractIt′s well known that the environmental and operational variations during the service life of aircraft structure could easily introduce uncertainties to the guided wave features, making it difficult to interpret the changes of guided wave signals and leading to unreliable evaluations of the damage states. This problem has become one of the key problems that hinder the engineering applications of aeronautical structural health monitoring technology. To solve this problem, a damage monitoring method based on guided wave and enhanced split merge probability model is proposed. Firstly, a stable Gaussian mixture model (GMM) is established by an enhanced split merge modeling algorithm based on the guided wave features influenced by time-varying conditions. Then, the damage evaluation is realized by observing the cumulative migration trend of GMMs, which is measured by a best matching based Kullback-Leibler (KL) divergence. To validate the proposed method, an experiment is performed on an aircraft wing spar under changing structural boundary conditions. Experimental results show that this method can achieve stable and reliable monitoring of crack propagation under time-varying conditions. In addition, compared with the damage evaluation results based on guided wave damage index, the damage evaluation reliability is improved obviously by the proposed method.

    Keywordsaircraft structure; structural health monitoring; guided wave; Gaussian mixture model; time-varying condition

    AnImprovedGeneticAlgorithmforPedestalLoosenessParameterIdentificationinRotor-BearingSystems

    CAOShuqian1,2,3,HUANGYaming1,2
    (1.Department of Mechanics, Tianjin University Tianjin, 300072, China) (2.Tianjin Key Laboratory of Nonlinear Dynamics and Chaos Control Tianjin, 300072, China) (3.State Key Laboratory of Engines, Tianjin University Tianjin, 300072, China)

    AbstractIn this paper, a non-linear dynamic equation of a rotor-bearing system with looseness between the pedestal and the casing is established. The non-linear parameters of the pedestal looseness fault are identified by means of the method of parameter optimization of genetic algorithm (GA), based on the displacement response signal in the vertical direction of the shaft end which has looseness. In view of the traditional genetic algorithm having problems of slow evolution and premature convergence, an improved method based on the genetic process of the traditional genetic algorithm is proposed. The method can take a greater mutation rate, restrain the premature convergence problem, and to speed up the evolution. Studies show that the improved method can effectively improve the efficiency of loosening parameters identification. The non-linear parameters of pedestal looseness fault are identified by the improved genetic algorithm, and the influence of mutation rate on recognition results is studied. Finally,the looseness parameters identification based on true measured signal is performed.

    Keywordsrotor system; pedestal looseness; improved genetic algorithm; parameter identification; looseness fault experiment

    StudyonthePeristalticFlowBasedonaModifiedImmersedBoundary-LatticeBoltzmannMethod

    RENXiaofei1,WEIShoushui1,LIUFeifei1,ZHANGLing2,WANGShaowei3,XUMingtian3
    (1.School of Control Science and Engineering, Shandong University Jinan, 250061, China) (2.School of Mathematics, Shandong University Jinan, 250061, China) (3.School of Civil Engineering, Shandong University Jinan, 250061, China)

    AbstractIn this paper, peristaltic flow in a tube due to the waves of contraction is studied applying a modified immersed boundary-lattice Boltzmann method. The lattice Boltzmann method is used to describe the flow filed, and the modified immersed boundary method is used to couple the moving boundaries to the surrounding fluid. This method introduces the velocity induced by the flexible tube wall into the lattice Boltzmann equation, which replaces the conversion between the fluid velocity and the force induced by the deformation of the moving boundaries in the traditional immersed boundary-lattice Boltzmann method. We analyze the streamlines and velocity distribution, then systematically investigate the effects of variation of the relevant parameters such as the amplitude ratio and frequency of the traveling wave, viscosity of the fluid and wavenumber on the flow of the peristaltic tube. The comparison between the simulative and existing results shows that the method is reasonable and effective.

    Keywordscomputational fluid dynamics; peristaltic flow; fluid-structure interaction; lattice Boltzmann method; immersed boundary method

    TheVibrationsandEnergyAnalysisofDeployingCantileverBeam

    LIUMing1,YANGXiaodong2,ZHANGWei2,QINChaohong3
    (1.Institute of Advanced Structure Technology, Beijing Institute of Technology Beijing, 100081, China) (2.Beijing Key Laboratory of Nonlinear Vibrations and Strength of Mechanical Engineering, Beijing University of Technology Beijing, 100124, China) (3.Science and Technology on Reliability and Environment Engineering Laboratory, Beijing Institute of Structure and Environment Engineering Beijing, 100076, China)

    AbstractThe deploying cantilever beam is a model of the typical time-varying structural system. The classical dynamic theory cannot be used to solve the vibration equations due to the changing of mass and stiffness. The vibrations and energy variations are studied based on the governing equations. The analytical expressions of the varying energy are obtained to show the characteristics of the vibration in the stable and unstable region of the system. Numerical method is employed to the vibration analysis and the variation diagrams of energy distributing among different modes in unstable state are discussed. The results show that the rule of energy distributing among the modes is quite different in the stable and unstable states.

    Keywordstime-varying parameter; deploying cantilever beam; instability; energy analysis; mode

    LambWavesDefectsImagingResearchBasedonPHMultiplierAlgorithmOptimization

    LIPeijiang1,2,ZHUXiaojin1,YOUTing3,ZHANGHesheng1,FANGYubin1
    (1.School of Mechatronics Engineering and Automation, Shanghai University Shanghai, 200072, China) (2.School of Information Engineering, Quzhou College of Technology Quzhou, 324000, China) (3.School of Electrical and Information Engineering, Quzhou College Quzhou, 324000, China)

    AbstractThe detection technology of ultrasonic guided waves has a wide application prospect in structural health monitoring. In this paper, a kind of Lamb waves defect imaging method and its optimization based on envelope amplitude are proposed for detecting aluminum sheet. The sparse PZT array is used as a transmitting and receiving device to generate the excitation signal and acquire the Lamb waves for difference between the health signal and the defect signal, which contains defect position information. An appropriate penalty function is determined introducing the factors containing the position weight vector to highlight the characteristics of the defective pixel. It transforms the improved waveguide image quality problem into a series of solving unconstrained optimization problems,and the augmented objective function can be determined by means of PH multiplier algorithm, which makes the weight vector optimized and improves the image quality. Experimental results show that the positioning error about the algorithm is small, defect imaging of sheet is clear and can be intuitively recognized, and the optimal treatment of guided waves imaging is perfect.

    KeywordsLamb wave; imaging; PH multiplier algorithm optimization; amplitude of the envelope

    FeatureExtractionofRollingBearingBasedonAPLCD-WPT

    ZHAOXiaoping1,2,ZHOUZixian1,2,WANGLihua3,ZHANGYonghong3,TAORunzhe3
    (1.Jiangsu Engineering Center of Network Monitoring, Nanjing University of Information Science & Technology Nanjing, 210044, China) (2.School of Computer & Software,Nanjing University of Information Science & Technology Nanjing, 210044, China) (3.School of Information and Control,Nanjing University of Information Science & Technology Nanjing, 210044, China)

    AbstractIn order to extracting the characteristic frequency of rolling bearing signal, a feature extraction method based on adaptive partly-ensemble local characteristic-scale decomposition (APLCD) and wavelet package transform (WPT) is proposed, or APLCD-WPT for short. First, APLCD is employed to process vibration signals of rolling bearings, and it can add noise to improve the signal extreme-point distribution in extracting intrinsic mode component by changing the frequency variation. Then, WPT is used to trim less modal mixing problem, which can extract characteristic frequency signal of rolling bearing. Finally, the vibration signal of horizontal spiral centrifuge is analysed based on this method. The results show that APLCD-WPT can effectively suppress the mode mixing to accurately extract the characteristic frequency signal.

    Keywordsrolling bearing; feature extraction; model mixing; adaptive partly-ensemble local characteristic-scale decomposition (APLCD); wavelet package transform (WPT)

    ANewAlgorithmforT-LineFaultLocationBasedonWaveletEnergySpectrum

    WANGMei1,ZHULiang1,ZHANGGuoqiang1,WANGLiang1,LIUChi2
    (1.Institute of Electrical and Control Engineering, Xi′an University of Science and Technology Xi′an, 710054, China) (2.School of Software, Beijing Institute of Technology Beijing, 100081, China)

    AbstractConsidering the fault dead time problem of transmission lines with T type branches, a new algorithm based on wavelet energy spectrum for T transmission line location is proposed to achieve fault precision location. The cubic B-spline algorithm of wavelet transform modulus maxima is applied to extract the fault feature. In the non-dead zone, the three-terminal location method is used to accurately complete the fault location. In the dead time range, the wavelet energy spectrum algorithm judges the fault branch, and then the three terminal fault location method is used to complete the fault location. The simulation results show that the proposed method can meet the requirements of T-line fault location. The algorithm proposed in this paper is not only affected by the fault type and transition impedance, but also appropriate to solve the difficult problem of measuring the blind area in anOarea.

    KeywordsT line; wavelet transform; energy spectrum; fault location

    IdentificationofNon-uniformStiffnessDegradationinStructureBasedontheChangeRateofFrequency

    ZHANGJiabin,TANGCui,WANGLei,ZHANGJianren
    (School of Civil Engineering and Architecture, Changsha University of Science & Technology Changsha, 410114, China)

    AbstractTo study on non-uniform stiffness degradation in structure caused by adverse environmental effects and damage, an identification method for stiffness degradation is proposed based on the change rate of frequency using bending beam model, which considers the variation of modal deflection curvature and natural frequency before and after damage. Firstly, modal deflection curvature is derived through a flexibility matrix, and the damage area and location are determined through the variation of modal deflection curvature before and after damage. Then, the damage area is divided into segments, after that the matrix function of damage extent, location parameters of damage area and natural frequency is established according to the vibration theory of Euler-Bernoulli beam. It can directly assess the damage degree of different segments through the change rate of frequency. The results show that the method can precisely identify the location and extent of the local damage, and has advantages in assessment of the non-uniform stiffness degradation in structure.

    Keywordsconcrete component; local stiffness; natural frequency; flexibility matrix; modal deflection curvature

    CompoundControlforaPiezoelectricMicro-manipulationStage

    HUJunfeng,YANGMingli,ZHENGChanghu
    (School of Mechanical & Electrical Engineering, Jiangxi University of Science and Technology Ganzhou,341000, China)

    AbstractThe nonlinear characteristics of micro-manipulation stage may occurrs due to the hysteresis of piezoelectric actuator,which has seriously affected the motion precision and repeated positioning accuracy of the stage. In order to solve the problem,a compound control algorithm of feedforward compensation combined with feedback is proposed. The theoretical model reflecting the hysteresis phenomenon is established by combining discrete Preisach model and support vector machine. The inverse model of discrete Preisach is obtained by adopting the iterative search method based on the hysteresis model. The feedforward compensation of the stage is carried out based on the inverse model. In order to correct the deviation without eliminating by feedforward compensation and the error caused by the model′s uncertainty, proportion integration differentiation (PID) control is used to feedback regulation. In order to illustrate the feasibility of the proposed control method,an experimental comparative analysis of the composite control, feedforward control and PID control is carried out. The results show that the proposed method has better control accuracy and fast response.

    Keywordsmicro-manipulation stage; piezoelectric actuator; inverse Preisach model; compound control; support vector machine

    InvestigationonFaultClassificationBasedonNon-subsampledContourletTransform

    LIHongkun1,CUIMingli1,YANGRui1,ZHANGZhixin2,WANGFengtao1
    (1.School of Mechanical Engineering, Dalian University of Technology Dalian, 116024, China) (2.School of Mechanical Engineering, Dalian University Dalian, 116622, China)

    AbstractIn this research, a new method of time-frequency image feature extraction is proposed. It is based on the multi-scale and multi-direction decomposition of the non-subsampled contourlet transform. Firstly, the vibration signals are transformed into a time-frequency image which is then converted into a gray image based on the contourlet transform. Then, the coefficients at high and low frequency are calculated based on the gray image. Different feature extraction methods are investigated in details. In this paper, the energy at the high-frequency, the mean and standard deviation at the low-frequency are calculated as characteristic parameters. Finally, the data of different conditions from a gearbox and rolling bearing are classified and tested by support vector machine (SVM). The results show that the proposed method is effective in determining the characteristic value of a time-frequency image for the condition identification.

    Keywordsnon-subsampled contourlet; time-frequency image; support vector machine (SVM); condition identification

    ResearchonIdentificationofPickAlloyHead′sFailureModeBasedonBPNeuralNetwork

    ZHANGQiang1,2,3,LIUZhiheng1,WANGHaijian1,TIANYing1,NGUYENVietTuyen1,4
    (1.College of Mechanical Engineering, Liaoning Technical University Fuxin, 123000, China ) (2.State key Laboratory of Mineral Processing Science and Technology Beijing, 100160, China) (3.Engineering Research Center for Safe Exploitation and Clean Utilization of Coal Resources, Liaoning Technical University Fuxin, 123000, China) (4.Vietnam Coal Mine Machinery Energy Research Institute Hanoi, 100000, Vietnam)

    AbstractIn order to monitor and identify the failure mode of the alloy head of the pick-cutting, a method based on BP neural network is proposed to deal with the multi- feature signals. The chapped, off, chipping and serious wear alloy head are tested in cutting process to extract the maximum, mean and variance of the three directional vibration characteristic signals and current signal of the cutting motor. The BP neural network is learned and trained by multi-feature signals to establish the recognition model and monitor and identify the failure mode on-line. The experimental results show that the results of BP neural network are consistent with the actual failure mode of the test samples. It provides new methods to realize online monitoring and identification of failure mode for shearer picks.

    Keywordspick; BP neural network; alloy head′s failure mode; vibration signal; current signal

    AnalysisoftheAbnormalChangeofIsolatedStructureModalParametersUnderHealthyConditionBasedonLong-TermMonitoringData

    DUYongfeng1,2,ZHUQingxin1,LIWanrun1,2,ZHUQiankun1,2
    (1.Institute of Earthquake Protection and Disaster Mitigation, Lanzhou University of Technology Lanzhou, 730050, China) (2.Western Center of Disaster Mitigation in Civil Engineering of Ministry of Education Lanzhou, 730050, China)

    AbstractDue to its excellent damping effect, seismic isolation technology is widely used in the lifeline engineering such as school, hospital and etc. A set of long-time structural health monitoring system is designed and installed in a teaching building to test the isolation design and ensure its safety. This system can record the structural response to common environmental factors and different loads. Based on the collected data of the structural acceleration response, the improved Morlet wavelet modal parameter identification method is used to analyze and process the data in real time, identify structural modal parameters under different conditions, and analyze the impact on the law from the environmental factors and human activities. The result indicates that the changes of personnel activities and environment temperature have great influence on the dynamic characteristics of the isolated structure, which should be considered in the design. Finally, two seismic response data collected by the structural health monitoring system are analyzed, and the structure characteristics′ variation law of the isolated structure under earthquake is concluded.

    Keywordsbase isolation;structural health monitoring;wavelet transform; ambient excitation; earthquake excitation;modal parameter

    LowEnergyImpactLocalizationofCompositeMaterialsBasedonResistanceStrainGauge

    ZHAOGang1,2,3,LIShuxin1,3,LIULisheng3,LIKun1,2
    (1.State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology Wuhan, 430070,China) (2.School of Mathematics and Information Sciences, Nanchang Hangkong University Nanchang, 330063, China) (3.School of Science, Wuhan University of Technology Wuhan, 430070, China)

    AbstractAccording to the requirements of the impact and vibration testing for carbon fiber reinforced plastics (CFRP) used in aircraft structures, the method of achieving impact localization with resistance strain gauge is proposed. First, the dynamic strain signal is received from the resistance strain gauge. Then, the wavelet transform is applied to extract the arrival time of the signal. The wave velocity is calculated based on Mindlin plate theory. Finally, the coordinate of the impact source can be obtained by the localization algorithm proposed in this paper. Experiments are carried out on a carbon fiber laminate plate with the size of 400mm×400mm×2mm.The experimental results show that the error is less than 10mm. Thus, this paper provides a feasible approach to achieve structural health monitoring of aircraft structures.

    Keywordslow energy impact; resistance strain gauge; wavelet transform; localization; carbon fiber reinforced plastics (CFRP)

    DynamicsAnalysisofMillingMulti-hardnessMosaicHardenedSteel

    YUECaixu,FENGLei,GAOHaining,ZHULei,ZHANGHaitao,LIUXianli
    (School of Mechanical and Power Engineering, Harbin University of Science and Technology Harbin, 150080, China)

    AbstractChatter is a strong self-excited vibration phenomenon which is produced by the interaction between the tool and workpiece in the metal cutting process. It can reduce the surface quality of the workpiece and tool life when increase the cutting force amplitude increase and cause strong fluctuation. First, the dynamic milling force system is designed based on the stability prediction analysis. The chatter stability in the milling process is simulated after the study of multi-hardness mosaic hardened steel for its lobes figure. Then, the influence of modal parameters on the shape of lobes figure is analyzed. The forecast accuracy of stability lobe figure is validated by the study of time domain analysis, tool wear and surface topography. The result provides reasonable processing parameters for milling multi-hardness mosaic hardened steel and theoretical basis and technical guidance for the selection of processing parameters in milling automobile cover mold.

    Keywordsmulti-hardness mosaic mold; milling stability; Lobes figure; surface topography; tool wear

    FaultDiagnosisofRollingBearingBasedonk-OptimizedVMD

    WANGFengtao,LIUChenxi,ZHANGTao,DUNBosen,HANQingkai,LIHongkun
    (School of Mechanical Engineering, Dalian University of Technology Dalian, 116024, China)

    AbstractIn the light of extracting fault features of a rolling bearing in early failure period, an incipient fault feature extraction method based onk-optimized variational mode decomposition (VMD) and kurtogram is proposed, wherekvalue is selected based on energy criteria. First, the vibration signals are decomposed by VMD, the energy of intrinsic mode function components is summed under differentkvalues. Based on the energy criterion, the bestkvalue is determined, which is used as the parameter of VMD in decomposing the signals. The reconstructed signals are demodulated at last. The simulated and measured signals of fault bearing are analyzed by this method, which can effectively extract the weak inner ring fault feature. The result shows that the method can determine the incipient fault feature with the bestkvalue, which is significantly valuable in applications.

    Keywordsrolling bearing; variational mode decomposition(VMD); kurtogram; fault diagnosis; fault feature extraction

    VibrationandShockTestingforEmbeddedMEMSSensorforIntelligentAero-engineApplications

    SHAOJing1,DUANLi2,HUMinkai2,DINGGuifu2,MAOChenglong3,SHENJie3,JINGBo4
    (1.AECC Commercial Aircraft Engine Co., Ltd Shanghai, 200241, China) (2.Electronic Information and Electrical Engineering, Shanghai Jiao Tong University Shanghai, 200240, China) (3.Suzhou TST Control Technology Co., Ltd Suzhou, 215164, China) (4.Mechanical Engineering, Shanghai Jiao Tong University Shanghai, 200240, China)

    AbstractIntelligent aero-engines and other mechanical systems require the vibration- and shocking-resistant embedded sensors, which also has to endure the tough requirements such as high temperature, high shocking, and high vibration strength. In this paper, a high temperature embedded sensor by the aid of micro-electro-mechanical-system (MEMS) technology is integrated into the aero-engine turbine blade. High temperature characterization and a series of vibrational and shocking tests are conducted to verify the functionality of the sensor system in order to stand for the tough working environment of the sensor system including the attaching-ability of MEMS thin film as well as the joint strength of the connection cables to the sensor. The sensor system is capable of sensing up to 800℃ high temperature and stand for up to 40gvibration and 100gshocking.

    Keywordsvibration test; shocking test; micro-electro-mechanical-system (MEMS) micro-fabrication; embedded integration

    NoiseReductionMethodofVibrationSignalBasedonSingularValueandSingularVector

    ZHANGXiaotao1,LIWeiguang2
    (1.School of Automotive,Guangdong Mechanical & Electronical College of Technology Guangzhou, 510515, China) (2.School of Mechanical and Automotive Engineering, South China University of Technology Guangzhou, 510640, China)

    AbstractIn the light of coexistence of random noise and power interference noise in rotor vibration signals, the noise reduction method based on the combination of singular value and singular vector is proposed. First, the signals processed with signal value decomposition (SVD) method, the effective order of singular value can be obtained from singular value spectrum, in this way the random noise can be reduced. From the relationship between singular value and singular vector we can get the corresponding singular vectors. Then, these singular vectors are calculated with fast Fourier transformation (FFT). The singular vectors corresponding to the power interference are filtered based on the FFT amplitude spectrum feature. Finally, the time-domain signal with all the other singular values and singular vector are reconstructed to reduce the random noise and power interference noise in the target signals. Simulation experimental results demonstrate that the proposed method can effectively reduce the random noise and power interference noise, which is obviously superior to the notch filter method.

    Keywordssingular value decomposition; singular value; singular vector; power interference

    FuzzyC-meansBasedHealthAssessmentMethodforSpaceMechanismShafting

    LIUHongxing,QINGTao,WANGHong,ZHOUNingning
    (Beijing Key Laboratory of Long-Life Technology of Precision Rotation and Transmission Mechanism, Beijing Institute of Control Engineering Beijing,100094,China)

    AbstractA health assessment method for space mechanism shafting based on fuzzy C-means clustering is proposed in the light of applying the existing health assessment methods to space mechanism shafting. First, a new parameter named characteristic frequencies′ distinctness is defined. Then, the fuzzy C-means clustering model is trained by the kurtosis and characteristic frequencies′ distinctness of fine and faulted shafts. Finally, the health index is constructed according to the membership related to the fine shafting cluster. With the proposed method, the shafts can be sorted correctly according to the health state, and the reliable health index can be obtained at high rotation speeds. The practicability and effectiveness of the approach proposed have been demonstrated.

    Keywordsfuzzy C-means; health assessment; space mechanism shafting; characteristic frequencies′distinctness; health index

    FaultDiagnosisMethodforAutomataMachineBasedonMultipleScaleSampleEntropyandVPMCD

    WANGFei,FANGLiqing,QIZiyuan
    (First Department, Shijiazhuang Campus of the Army Engineering University Shijiazhuang, 050003, China)

    AbstractAs the characteristics of presents the fault features of vibration signals are hard to extract due to its nonlinearity, no-stationary and aperiodicity. In the light of the low fault recognition rate in an automata machine for this reason, a new approach is proposed which combines multiple scale sample entropy and variable predictive model based on the class discriminate (VPMCD). First, wavelet threshold noise reduction is applied to the collected signals. Then, the vibration signals are decomposed into several signals in different scales, the sample entropy of different signals are calculated and the sensitivity to fault characteristics are selected to constitute the fault features. Finally, the VPMCD is establishedbased on the fault features to recognize and classify the automata faults. The experimental results show that this method can accurately distinguish several typical fault forms of automata.

    Keywordsautomata machine; wavelet packet analysis; sample entropy; feature extraction; variable predictive model based class discriminate (VPMCD); fault diagnosis

    DirectDriveMotorSensorFaultDiagnosisBasedonOptimalUnknownInputObserverforElectricVehicle

    XUXing1,2,CHENTe1,CHENLong1,2
    (1.School of Automotive and Traffic Engineering, Jiangsu University Zhenjiang, 212013, China) (2.Research Institute of Automotive Engineering, Jiangsu University Zhenjiang, 212013, China)

    AbstractUsing direct driven in-wheel motor as the driving system of distributed driven electric vehicle,the power distribution of each driving wheel can be realized quickly and accurately. Aiming at the matter of current sensor fault and rotational speed sensor fault in distributed driven electric vehicle, the robust fault detection and location method is studied. Considering the unknown input and noise in motor model, decoupling the unknown input via the method of system order reduction, using Kalman filter (KF) to filter the white noise of the decoupled subsystem, the optimal unknown input observer (UIO) is designed to realize the system state estimation, and a robust residual generator is obtained. At the same time, the generalized likelihood ratio (GLR) method is used to evaluate the residual signals and determine the threshold value, a sensor fault location method is proposed. Bench experiment results show that the sensor fault diagnosis method based on optimal UIO realizes the sensor fault diagnosis and location of the direct driven in-wheel motor system.

    Keywordselectric vehicle; direct drive motor; sensor; fault diagnosis; unknown input observer; Kalman filte

    ShakingTableTestonSeismicResponseofRockSlope

    FENGXixia,JIANGQinghui,ZHANGHuichao,JIANGJinlin,PENGZhihao,JIANGWeihua
    (School of Civil Engineering, Wuhan University Wuhan, 430072, China)

    AbstractIn order to study the dynamic response of anti-dip layered rock slope models, one 2D physical model of anti-dip layered rock slope containing two groups of rock joints is designed for the shaking table test. The influence of different dynamic parameters including wave type, amplitude and frequency on the dynamic response of the slope model is considered. The research results reveal that the amplification coefficient of peak ground acceleration(PGA)increases with increasing the relative elevation, which is basically showed the non-linearly amplification characteristics, and this amplification trend is obvious near the slope top. With the increase of acceleration amplitude, PGA amplification coefficients rise on the whole, but it is influenced by rock structure and wave type. PGA amplification coefficients increase with the increase of frequency, and the growth trend become stronger near the slope top. The slope model under seismic loads mainly presents that shear cracks and tension cracks extend, connect and from step-type fractures. The failure of the slope is mainly caused by bending crack along joint surfaces. The study has theoretical and practical significance.

    Keywordsrock slope; shaking table test; peak ground acceleration(PGA) amplification coefficient; seismic response; failure mechanism

    InfluenceofPlateauLocomotiveSuspensionStructureonVehicleVibrationCharacteristics

    WANGChen1,LUOShihui1,FANHui2,DUZhongyuan2,MAWeihua1,XUZiqiang1
    (1.Traction Power State Key Laboratory, Southwest Jiaotong University Chengdu, 610031, China) (2.Dalian Locomotive and Rolling Stock Co.,Ltd Dalian, 116022, China)

    AbstractBased on the multi-body system dynamics theory, a plateau locomotive dynamic model is established with two kinds of different suspension schemes. The effects ofμon the acceleration of bogie, carbody and vertical wheel rail force are analyzed. It is pointed that with the increase ofμ, ranging from 0.5 to 3, the vertical acceleration of frame and vertical wheel rail force climb up to 11.24% and 12.2%; the vertical riding quality and acceleration of carbody go down by 11.3% and 15%. Then the influence of different suspension stiffness distribution schemes on vehicle/track vibration characteristics is investigated. The results indicate that the selection of a larger secondary suspension stiffness deteriorate vehicle sperling index. While a smaller primary suspension stiffness can reduce the vertical impact between wheel and rail caused by track irregularity. Especially, the low frequency vibration is inhibited, which do damage to the foundation under rail. The influence of locomotive on ballast and subgrade is decreased during the running process and the subgrade settlement is improved.

    KeywordsQinghai-Tibet railway; locomotive; suspension stiffness; vibration characteristic; dynamic performance

    BearingFaultDiagnosisBasedonARModelFilteringinAngleDomain

    CHENGWeidong,LIUDongdong,ZHAODezun
    (School of Mechanical Electronic and Control Engineering, Beijing Jiaotong University Beijing, 100044, China)

    AbstractThe algorithm of employing order tracking based on the time-frequency representation is limited in rolling bearing fault diagnosis under a variable rotational speed and gear vibration noise, because of the lack of extractable rotational frequency components. The algorithm of angle domain resampling based on fault characteristic frequency can extract the bearing fault characteristics, however the location of the fault cannot be found and error may occur in this algorithm. The method is proposed in this paper based on auto regressive (AR) model filtering in angle domain to solve this problem. To estimate the rotational speed, the gear instantaneous meshing frequency is extracted from the down sampling mixed signal using chirplet path pursuit algorithm. The mixed signal is re-sampled by a constant angular interval based on the estimated rotational speed. The gear noise is removed in the angle domain signal used AR model. Finally, the fault diagnosis is completed by observing the order spectrum gotten by Hilbert transformation and FFT. The effectiveness of the method is tested by the analysis of the simulation signal and experimental signal.

    Keywordsgear vibration noise; variable rotational speed; fault diagnosis; chirplet; gear instantaneous meshing frequency (GIMF); AR model

    BearingFaultDiagnosisBasedonVariationalModalDecompositionCombinedwithEnvelopeofSpectrum

    BOLin,TANGZhi,XUGuanji
    (The State Key Laboratory of Mechanical Transmission, Chongqing University Chongqing, 400044, China)

    AbstractAiming at the problem of early fault diagnosis of rolling bearing, it is pointed out that the empirical mode decomposition (EMD) has poor anti-noise effect and the limitation of end effect. Variational modal decomposition (VMD), principal component analysis (PCA) and entropy bearing fault diagnosis are put forward based on cepstral envelope. Firstly, it takes VMD to decompose the bearing vibration signal of rolling; secondly, the components are handled by PCA. Then, it computes the entropy of the components and choses whose entropy of components is less than the average to reconstruct. Finally, the reconstructed signal is analyzed by cepstral envelope. Experimental results show that the method can effectively extract the rolling bearing fault frequencies, and judge damage position of the rolling bearing, it has a good anti-noise ability.

    Keywordsvariational modal decomposition (VMD); principal component analysis (PCA);entropy;cepstral envelope

    DesignandExperimentofTrackMechanism-SoilInteractionSystem

    TANGLiwei1,SUNZhongxing1,WANGWei1,SUNYezun2
    (1.Department of Artillery Engineering, Shijiazhuang Campus of the Army Engineering University Shijiazhuang, 050003, China) (2.Representative Organization of Factory 247 Taiyuan, 030000, China)

    AbstractThe experimental system of track mechanism-soil interaction is designed and constructed according to the new test system of soil bin developed by the Key Laboratory of Bionic Engineering in Ministry of Education, which is composed of soil trough and track-type trolley device as well as its supporting driving element and real-time test system through which can obtain parameters such as driving moment of the motor, horizontal displacement of trolley, sinkage in the traveling process of the trolley, inclined angle of the vehicle body, and motor speed, as well as the variation from the start to the smooth operation of the trolley device. Laser range finder is constructed with turnplate to realize the stage extraction of the track shape, which is not in contact with a road wheel. The vehicle load, track width and slip rate are taken as the experimental factors, the mechanism sinkage is taken as the experimental index, and orthogonal experiment design method is adopted. The experiments are carried out in three different Tightness degrees of the track, where sinkages and dipangles are obtained. The three regression equations of the sinkage on the vehicle body load, track width and slip rate are obtained by regression analysis, whose fitting effect is good, confidence is 0.99, and correlation coefficient is not less than 0.9. The average relative error between the test value and the calculated value of the regression equation is less than 10%. The results can be used to predict the stress distribution of flexible track and provide data support and important reference for the ground of soft soil.

    Keywordstrack mechanism-soil interaction; track shape; sinkage; load; track width; slip rate

    VibrationModalMeasurementofHoneycombSandwichPanels

    BasedonLaserInterferometry

    TAONan,MAYinhang,JIANGYijun,YANGFujun,HEXiaoyuan
    (Department of Engineering Mechanics, Southeast University Nanjing, 210096, China)

    AbstractVibration characteristics of cantilevered honeycomb sandwich panels with local damage are studied by use of electronic speckle pattern interferometry (ESPI). By comparing with the results of finite element modeling simulation on cantilevered aluminum plate, the viewpoint of the homogeneous characteristics of honeycomb sandwich structures can be verified. The first fourteen out-of-plane resonant mode shapes of an intact plate are obtained by experimental method. The experimental results show that comparing with those of intact one, resonant frequencies of the honeycomb sandwich panels will become lower with the structural damage appearance, and the resonant mode shapes also change with the damage location and orientation. Veering in the mode shapes can be observed when the damaged structures vibrate at higher order resonant modes.

    Keywordslaminated honeycomb sandwich; mode shape; veering in the mode shapes; electronic speckle pattern interferometry (ESPI)

    ArcMechanismandParameterPredictionofVacuumArcBrazingEquipment

    LIUZhixiang1,2,XIEChunxue1,2,MAOJun2,XIEMiao1,2,LUJinnan2
    (1.Research Institute of Technology and Equipment for the Exploitation and Utilization of Mineral Resources, Liaoning Technical University Fuxin, 123000, China) (2.School of Mechanical Engineering, Liaoning Technical University Fuxin, 123000, China)

    AbstractIn the current research of vacuum arc brazing technology, there are problems that the key factors of arc ignition process are not clearly defined and the value of the factors is adjusted mostly based on experience. In this paper, the influencing factors of arc ignition process of vacuum arc brazing equipment are studied. To quickly build arc and get stable arc current, argon flow, breakdown voltage, breakdown distance and tantalum tube diameter cited various influential factors in the process of arc are analyzed one by one from the establishment of the basic mechanism. The optimal parameter prediction model is established based on adaptive neural network based fuzzy interference system(ANFIS) model. The argon flow, vacuum degree, the breakdown distance and the diameter of the tantalum tube as the prediction model input are used to predict the breakdown voltage optimal value. Through the field experiment, the theoretical research and the prediction performance of the parameter prediction model studied in this paper are verified and improved. The results show that the arc current in arc ignition process of vacuum arc brazing equipment is stable, which uses the parameters obtained from prediction model, and results meet process requirements.

    Keywordsvacuum arc welding; arc mechanism; parameter prediction; adaptive neural network based fuzzy interference system (ANFIS)

    FaultDiagnosisforSteamTurbineRotorbyUsingSupportVectorMachineBasedonCS-BBOOptimizationAlgorithm

    SHIZhibiao,GEChunxue
    (School of Mechanical Engineering, Northeast Dianli University Jilin, 132012, China)

    AbstractTo improve the accuracy and efficiency of turbine rotor fault diagnosis, a new method of fault diagnosis based on the biogeography-based optimization with chaos (CS-BBO) and support vector machine (SVM) is introduced. Firstly, the chaos theory is introduced into the biogeography-based optimization algorithm (BBO), the CS-BBO algorithm is obtained. Then, the optimal parameters of the SVM diagnostic model are obtained through the CS-BBO algorithm, and optimization model enhances the learning ability and generalization ability of SVM. Finally, the validity of the optimization model is verified by the experimental data of 4 kinds of states from ZT-3 rotor test bench to simulate the turbine rotor fault. The results show that the optimized model of SVM obtained by CS-BBO algorithm can be used to diagnose the fault of the steam turbine rotor accurately and efficiently. Compared with the optimized SVM model, which is obtained by the biogeography-based optimization algorithm, the accuracy and efficiency of fault diagnosis of this method is higher.

    Keywordssupport vector machine; parameter optimization; biogeography-based optimization with chaos; fault diagnosis; steam turbine rotor

    PowerTransformerVibrationCharacterizationAnalysisbyVectoringFittingMethod

    HUMin1,3,PENGWei2,JINZhijian3,YUANGuogang4
    (1.Shanghai Jiulong Electric Power (Group) Co., Ltd Shanghai, 200436, China ) (2.Electric Power Research Institute of State Grid Shanghai Municipal Electric Power Company Shanghai, 200437, China) (3.School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University Shanghai, 200240, China) (4.Shanghai Rhythm Electronic Technology Co., Ltd Shanghai, 201108, China)

    AbstractVibration characterization of power transformer is an import key to reliability and trouble shooting, The vector fitting (VF)method is used to analysis vibration test data of power transformer surface. The VF is compared with PolyLSCF method and the experimental data of power transformer is analyzed. It can be found that the 100 Hz operation frequency causes harmonic response, and the vibration level of the transformer bottom is much higher and local mode is checked after sole analysis. The analysis result will provide advice on optimization of measurement point locations and failure recognition.

    Keywordstransformer; vector fitting; vibration characteristic; modal analysis

    猜你喜歡
    英文
    英文摘要
    國際展望(2017年2期)2017-03-21 18:34:18
    英文摘要
    英文摘要
    英文摘要
    英文摘要
    英文摘要
    英文摘要
    英文摘要
    國際展望(2015年5期)2015-09-15 05:41:45
    英文摘要
    國際展望(2015年4期)2015-07-13 05:30:56
    英文摘要
    能源(2014年9期)2014-09-15 13:18:12
    亚洲精品第二区| 精品久久久精品久久久| 黑人猛操日本美女一级片| 91狼人影院| 国产欧美日韩一区二区三区在线 | av视频免费观看在线观看| 日韩欧美一区视频在线观看 | 国产免费一区二区三区四区乱码| 精品久久久久久久久av| 亚洲av成人精品一二三区| 日本午夜av视频| 男人舔奶头视频| 国产一区二区三区综合在线观看 | 欧美最新免费一区二区三区| 午夜免费男女啪啪视频观看| 亚洲人成网站高清观看| 18禁动态无遮挡网站| 久久99热6这里只有精品| 久久人人爽人人片av| 国产免费视频播放在线视频| 99久久精品热视频| 2022亚洲国产成人精品| av网站免费在线观看视频| 国产高潮美女av| 日本黄大片高清| 免费观看在线日韩| 久久国产精品大桥未久av | 国产精品麻豆人妻色哟哟久久| 国产亚洲一区二区精品| 中文乱码字字幕精品一区二区三区| 亚洲va在线va天堂va国产| 啦啦啦视频在线资源免费观看| 男女国产视频网站| 欧美精品国产亚洲| 国产成人91sexporn| 国产欧美另类精品又又久久亚洲欧美| 久久久久久伊人网av| 日韩精品有码人妻一区| 亚洲欧美日韩无卡精品| 精品熟女少妇av免费看| 女性生殖器流出的白浆| 日本黄色日本黄色录像| 国产成人午夜福利电影在线观看| 日韩成人伦理影院| 欧美日本视频| 欧美变态另类bdsm刘玥| 国产在线男女| 91狼人影院| 精品酒店卫生间| 内射极品少妇av片p| 少妇的逼水好多| 成人一区二区视频在线观看| 午夜免费男女啪啪视频观看| 又黄又爽又刺激的免费视频.| 国产深夜福利视频在线观看| 亚洲国产成人一精品久久久| 国产v大片淫在线免费观看| 美女高潮的动态| 欧美3d第一页| 简卡轻食公司| 亚洲欧美日韩另类电影网站 | 亚洲av不卡在线观看| 欧美 日韩 精品 国产| 国产精品嫩草影院av在线观看| 五月玫瑰六月丁香| 一区二区av电影网| 亚洲一级一片aⅴ在线观看| 亚洲国产欧美在线一区| av一本久久久久| 青青草视频在线视频观看| 丰满乱子伦码专区| 又粗又硬又长又爽又黄的视频| 国产成人91sexporn| 亚洲av成人精品一二三区| 亚州av有码| 国产亚洲欧美精品永久| 一级a做视频免费观看| 国产成人免费观看mmmm| 少妇丰满av| 2022亚洲国产成人精品| 精品人妻视频免费看| av播播在线观看一区| 欧美亚洲 丝袜 人妻 在线| 精品人妻视频免费看| 美女主播在线视频| 婷婷色综合大香蕉| 日韩不卡一区二区三区视频在线| 国产成人91sexporn| 国产欧美另类精品又又久久亚洲欧美| 亚洲精品乱久久久久久| 国产亚洲欧美精品永久| 九九久久精品国产亚洲av麻豆| 精品国产一区二区三区久久久樱花 | 一个人看视频在线观看www免费| 国产伦精品一区二区三区四那| 亚洲国产精品专区欧美| 国产一区二区三区av在线| 中文欧美无线码| 美女主播在线视频| 少妇人妻 视频| 亚洲av.av天堂| 国产亚洲91精品色在线| 九色成人免费人妻av| 国产亚洲午夜精品一区二区久久| 伦理电影免费视频| 99九九线精品视频在线观看视频| 偷拍熟女少妇极品色| 欧美日韩视频高清一区二区三区二| 舔av片在线| 99九九线精品视频在线观看视频| 偷拍熟女少妇极品色| 嫩草影院新地址| 久久 成人 亚洲| 夜夜骑夜夜射夜夜干| 少妇人妻精品综合一区二区| 人妻少妇偷人精品九色| 久久久久国产精品人妻一区二区| 人妻系列 视频| 超碰97精品在线观看| 亚洲美女搞黄在线观看| 国产色爽女视频免费观看| av专区在线播放| 少妇的逼水好多| 久久精品国产亚洲av涩爱| 久久久欧美国产精品| 少妇的逼水好多| kizo精华| 少妇高潮的动态图| 成人亚洲欧美一区二区av| 日日摸夜夜添夜夜添av毛片| 岛国毛片在线播放| 高清午夜精品一区二区三区| 看免费成人av毛片| 色网站视频免费| 寂寞人妻少妇视频99o| 亚洲av国产av综合av卡| 国产黄频视频在线观看| 免费播放大片免费观看视频在线观看| 国产精品av视频在线免费观看| 99热网站在线观看| 色哟哟·www| 黄色怎么调成土黄色| 欧美日韩国产mv在线观看视频 | 亚洲最大成人中文| 国产精品.久久久| 日韩,欧美,国产一区二区三区| 波野结衣二区三区在线| 看十八女毛片水多多多| 肉色欧美久久久久久久蜜桃| 22中文网久久字幕| 天天躁夜夜躁狠狠久久av| 日本午夜av视频| 国产精品国产三级国产av玫瑰| 精品一区在线观看国产| 一本久久精品| 熟女人妻精品中文字幕| 香蕉精品网在线| 日本欧美视频一区| 人妻 亚洲 视频| 黄色视频在线播放观看不卡| 天天躁日日操中文字幕| 亚洲色图综合在线观看| 毛片女人毛片| 一级黄片播放器| 国产视频内射| 午夜精品国产一区二区电影| 男女无遮挡免费网站观看| 亚洲成色77777| 亚洲欧美精品自产自拍| 在线观看免费日韩欧美大片 | 在线免费十八禁| 蜜桃亚洲精品一区二区三区| 中文字幕亚洲精品专区| 中文在线观看免费www的网站| 久久毛片免费看一区二区三区| 五月开心婷婷网| 男的添女的下面高潮视频| 国产一区二区在线观看日韩| 亚洲欧美成人综合另类久久久| 国产亚洲欧美精品永久| 欧美成人a在线观看| 三级国产精品片| 久久久a久久爽久久v久久| 亚洲国产精品999| .国产精品久久| 免费高清在线观看视频在线观看| 日本午夜av视频| 高清av免费在线| 欧美zozozo另类| 黄色视频在线播放观看不卡| 特大巨黑吊av在线直播| 成人午夜精彩视频在线观看| 欧美激情极品国产一区二区三区 | 欧美日韩一区二区视频在线观看视频在线| 亚洲精品视频女| 亚洲怡红院男人天堂| 国产精品免费大片| 高清不卡的av网站| 人妻系列 视频| 精品亚洲成a人片在线观看 | 有码 亚洲区| 好男人视频免费观看在线| 99热6这里只有精品| 在线观看一区二区三区激情| 免费看光身美女| 国产精品一区二区性色av| 一区二区av电影网| 深爱激情五月婷婷| 成年人午夜在线观看视频| 国产深夜福利视频在线观看| 色5月婷婷丁香| 亚洲第一区二区三区不卡| 亚洲av国产av综合av卡| 99热网站在线观看| 免费观看无遮挡的男女| 啦啦啦啦在线视频资源| 国产在线男女| 高清午夜精品一区二区三区| 精华霜和精华液先用哪个| 久久久精品94久久精品| 色婷婷久久久亚洲欧美| 国产乱人偷精品视频| 国产欧美亚洲国产| 亚洲精品乱码久久久久久按摩| 亚洲欧美成人综合另类久久久| 偷拍熟女少妇极品色| 狂野欧美激情性bbbbbb| av在线老鸭窝| 精品国产一区二区三区久久久樱花 | 成年美女黄网站色视频大全免费 | 啦啦啦啦在线视频资源| 99久久精品一区二区三区| 免费观看在线日韩| 成人国产麻豆网| 久久青草综合色| 国产精品国产三级国产专区5o| 精品视频人人做人人爽| av福利片在线观看| 一区在线观看完整版| 舔av片在线| 日韩 亚洲 欧美在线| 国产色婷婷99| 久久国产精品大桥未久av | 欧美精品人与动牲交sv欧美| 看非洲黑人一级黄片| 嫩草影院新地址| 国产精品国产三级国产专区5o| 久热这里只有精品99| 国产女主播在线喷水免费视频网站| av又黄又爽大尺度在线免费看| 一区二区三区免费毛片| 婷婷色av中文字幕| 日韩成人伦理影院| 亚洲av国产av综合av卡| 丰满人妻一区二区三区视频av| 天天躁日日操中文字幕| 女的被弄到高潮叫床怎么办| 国产毛片在线视频| 国产高潮美女av| 一边亲一边摸免费视频| 亚洲四区av| videos熟女内射| av.在线天堂| 国产成人免费观看mmmm| 日韩欧美精品免费久久| 亚洲av不卡在线观看| 99re6热这里在线精品视频| av在线观看视频网站免费| 建设人人有责人人尽责人人享有的 | 久久精品久久精品一区二区三区| 狂野欧美激情性bbbbbb| 国产成人a区在线观看| 高清午夜精品一区二区三区| 日韩大片免费观看网站| 日韩免费高清中文字幕av| 美女中出高潮动态图| 国产探花极品一区二区| 纵有疾风起免费观看全集完整版| 啦啦啦在线观看免费高清www| 亚洲av免费高清在线观看| 新久久久久国产一级毛片| 网址你懂的国产日韩在线| 国产精品av视频在线免费观看| 精品少妇久久久久久888优播| 亚洲精品456在线播放app| 亚洲久久久国产精品| 国产一区二区三区av在线| 久久ye,这里只有精品| 久久精品国产亚洲网站| 亚洲精华国产精华液的使用体验| 国产黄色免费在线视频| 深爱激情五月婷婷| 美女视频免费永久观看网站| h视频一区二区三区| 亚洲av欧美aⅴ国产| 国产高清国产精品国产三级 | 国产有黄有色有爽视频| 丰满人妻一区二区三区视频av| 午夜老司机福利剧场| 一个人免费看片子| 高清午夜精品一区二区三区| 久久久久久伊人网av| 亚洲国产最新在线播放| 丝瓜视频免费看黄片| 欧美区成人在线视频| 日日撸夜夜添| 国产在视频线精品| 伊人久久国产一区二区| av福利片在线观看| 日韩大片免费观看网站| 免费观看的影片在线观看| 成人美女网站在线观看视频| 亚洲欧美一区二区三区黑人 | 啦啦啦视频在线资源免费观看| 国产精品蜜桃在线观看| 岛国毛片在线播放| 99久久精品热视频| 亚洲va在线va天堂va国产| 日本欧美视频一区| 午夜福利高清视频| 噜噜噜噜噜久久久久久91| 男人爽女人下面视频在线观看| kizo精华| 五月伊人婷婷丁香| 亚洲高清免费不卡视频| 又爽又黄a免费视频| 免费观看av网站的网址| 亚洲av.av天堂| 亚洲av免费高清在线观看| a级一级毛片免费在线观看| 亚洲精品久久久久久婷婷小说| 美女xxoo啪啪120秒动态图| 干丝袜人妻中文字幕| 99国产精品免费福利视频| 少妇丰满av| 97热精品久久久久久| 一级爰片在线观看| 日韩欧美 国产精品| 我要看日韩黄色一级片| 国产一级毛片在线| 最近中文字幕2019免费版| 国产亚洲午夜精品一区二区久久| 国产69精品久久久久777片| 国产在线免费精品| 99久久中文字幕三级久久日本| 国产精品久久久久久精品电影小说 | 永久网站在线| 男女国产视频网站| 国产精品久久久久久精品古装| 亚洲中文av在线| 各种免费的搞黄视频| 韩国av在线不卡| 久久久久国产网址| 国产精品秋霞免费鲁丝片| 久久久久网色| 国产伦在线观看视频一区| 最新中文字幕久久久久| 热99国产精品久久久久久7| 赤兔流量卡办理| 少妇丰满av| 下体分泌物呈黄色| 亚洲性久久影院| 美女国产视频在线观看| av不卡在线播放| 色5月婷婷丁香| 亚洲综合色惰| 国产精品99久久99久久久不卡 | 日本色播在线视频| 亚洲婷婷狠狠爱综合网| tube8黄色片| av在线观看视频网站免费| 王馨瑶露胸无遮挡在线观看| 亚洲三级黄色毛片| 国产精品国产三级专区第一集| 免费观看性生交大片5| 日韩视频在线欧美| 日产精品乱码卡一卡2卡三| 少妇猛男粗大的猛烈进出视频| 亚洲第一av免费看| 街头女战士在线观看网站| 最后的刺客免费高清国语| 国产在线男女| 国内揄拍国产精品人妻在线| 精品久久久久久久末码| 欧美一级a爱片免费观看看| 蜜臀久久99精品久久宅男| 插阴视频在线观看视频| 国产毛片在线视频| 一级毛片 在线播放| 亚洲精品成人av观看孕妇| 永久网站在线| 日日摸夜夜添夜夜爱| 久久国产精品男人的天堂亚洲 | 亚洲欧美日韩卡通动漫| tube8黄色片| 美女主播在线视频| 最近的中文字幕免费完整| 精品国产一区二区三区久久久樱花 | 丰满乱子伦码专区| videos熟女内射| 亚洲成人中文字幕在线播放| 亚洲人与动物交配视频| 国产免费福利视频在线观看| 少妇猛男粗大的猛烈进出视频| 国产又色又爽无遮挡免| 亚洲av.av天堂| 久久久久久人妻| 中文字幕av成人在线电影| 最近手机中文字幕大全| 交换朋友夫妻互换小说| 男人和女人高潮做爰伦理| 国产高潮美女av| 久久久久国产精品人妻一区二区| 日本av免费视频播放| 欧美极品一区二区三区四区| 高清日韩中文字幕在线| 男女无遮挡免费网站观看| 国产国拍精品亚洲av在线观看| 国产在线男女| 久久久久久久精品精品| 国产高清不卡午夜福利| 成年人午夜在线观看视频| 国产高清不卡午夜福利| 成年人午夜在线观看视频| 亚洲精品乱码久久久久久按摩| 韩国高清视频一区二区三区| 最新中文字幕久久久久| 亚洲国产毛片av蜜桃av| 男女国产视频网站| 亚洲欧美日韩东京热| 大片免费播放器 马上看| 亚洲国产高清在线一区二区三| 大片免费播放器 马上看| 欧美日韩一区二区视频在线观看视频在线| 精品人妻熟女av久视频| 国产黄频视频在线观看| 成年人午夜在线观看视频| 亚洲av国产av综合av卡| 在线亚洲精品国产二区图片欧美 | 精品人妻视频免费看| 国产爽快片一区二区三区| 99久久精品热视频| 国产淫语在线视频| 超碰av人人做人人爽久久| 日韩,欧美,国产一区二区三区| 亚洲婷婷狠狠爱综合网| 亚洲精品aⅴ在线观看| 一二三四中文在线观看免费高清| 国产高清不卡午夜福利| 精品一区二区三区视频在线| 久久99蜜桃精品久久| 欧美成人精品欧美一级黄| 99久久精品热视频| 精品视频人人做人人爽| 青青草视频在线视频观看| 国产白丝娇喘喷水9色精品| 美女cb高潮喷水在线观看| 午夜福利网站1000一区二区三区| 国产亚洲一区二区精品| 亚洲国产av新网站| h视频一区二区三区| 国产精品女同一区二区软件| 久久久久国产网址| 国产成人a∨麻豆精品| 精品熟女少妇av免费看| 国产精品国产三级国产专区5o| 国产一区二区在线观看日韩| 国产一区有黄有色的免费视频| 免费久久久久久久精品成人欧美视频 | 制服丝袜香蕉在线| 国产视频内射| www.色视频.com| 成年女人在线观看亚洲视频| 深爱激情五月婷婷| 99精国产麻豆久久婷婷| 久久精品夜色国产| 日韩精品有码人妻一区| 亚洲av成人精品一区久久| 多毛熟女@视频| 日韩欧美一区视频在线观看 | 久久久久国产精品人妻一区二区| 黄片wwwwww| 亚洲人成网站高清观看| 99九九线精品视频在线观看视频| 老司机影院毛片| 人妻少妇偷人精品九色| 3wmmmm亚洲av在线观看| 欧美一级a爱片免费观看看| 99九九线精品视频在线观看视频| 黑丝袜美女国产一区| 国产精品嫩草影院av在线观看| 免费人妻精品一区二区三区视频| 亚洲av不卡在线观看| 我的老师免费观看完整版| 人妻少妇偷人精品九色| 婷婷色综合大香蕉| 久久国产精品男人的天堂亚洲 | av天堂中文字幕网| 狂野欧美白嫩少妇大欣赏| 国产精品无大码| 乱码一卡2卡4卡精品| 国产亚洲最大av| 少妇高潮的动态图| a 毛片基地| 久久ye,这里只有精品| 看免费成人av毛片| 中文乱码字字幕精品一区二区三区| av播播在线观看一区| 新久久久久国产一级毛片| 一级毛片电影观看| 成人亚洲精品一区在线观看 | 国产有黄有色有爽视频| 人妻系列 视频| 日本vs欧美在线观看视频 | 日产精品乱码卡一卡2卡三| 国产深夜福利视频在线观看| 免费av中文字幕在线| 女人久久www免费人成看片| 国产淫片久久久久久久久| 91aial.com中文字幕在线观看| 乱码一卡2卡4卡精品| 国产精品爽爽va在线观看网站| 黄色一级大片看看| 人妻少妇偷人精品九色| 欧美日韩精品成人综合77777| 精品久久久噜噜| 久久人人爽av亚洲精品天堂 | 青春草国产在线视频| 美女国产视频在线观看| 久久亚洲国产成人精品v| 日韩欧美精品免费久久| 自拍偷自拍亚洲精品老妇| 老师上课跳d突然被开到最大视频| 狂野欧美激情性xxxx在线观看| 免费av不卡在线播放| 午夜激情福利司机影院| 日本vs欧美在线观看视频 | 一区二区三区精品91| videos熟女内射| 日韩视频在线欧美| 高清不卡的av网站| 久久热精品热| 久久精品国产鲁丝片午夜精品| 伦理电影免费视频| 免费av不卡在线播放| 99热6这里只有精品| 亚洲综合色惰| 91狼人影院| 毛片女人毛片| 3wmmmm亚洲av在线观看| 秋霞伦理黄片| 美女内射精品一级片tv| 久久久午夜欧美精品| 精品亚洲成a人片在线观看 | 国产av码专区亚洲av| 少妇熟女欧美另类| 一本—道久久a久久精品蜜桃钙片| 熟女av电影| 久久国内精品自在自线图片| 一区在线观看完整版| 男女无遮挡免费网站观看| 国产成人免费无遮挡视频| 久久精品人妻少妇| 中文字幕人妻熟人妻熟丝袜美| 美女xxoo啪啪120秒动态图| 亚洲第一区二区三区不卡| 蜜桃亚洲精品一区二区三区| 国产男女内射视频| 国产精品一区二区在线观看99| 欧美xxxx性猛交bbbb| 久久久久久久久大av| 91精品一卡2卡3卡4卡| 最近2019中文字幕mv第一页| 黄片wwwwww| 赤兔流量卡办理| 能在线免费看毛片的网站| 亚洲欧美精品专区久久| 欧美97在线视频| 在线观看免费高清a一片| 亚洲av国产av综合av卡| 一个人免费看片子| 久久97久久精品| 久久精品人妻少妇| 老女人水多毛片| 久久青草综合色| 国产乱人视频| 国产在线一区二区三区精| 欧美一区二区亚洲| 纵有疾风起免费观看全集完整版| 国产深夜福利视频在线观看| 一级二级三级毛片免费看| 在线看a的网站| 亚洲精品乱码久久久v下载方式| 噜噜噜噜噜久久久久久91| 久久人妻熟女aⅴ| 欧美极品一区二区三区四区| 久久ye,这里只有精品| 午夜福利在线观看免费完整高清在| 亚洲国产成人一精品久久久| 日韩强制内射视频| 国产熟女欧美一区二区| 亚洲成人一二三区av| 中文精品一卡2卡3卡4更新| h日本视频在线播放| 日本黄色片子视频| 国产国拍精品亚洲av在线观看| av福利片在线观看| 男人狂女人下面高潮的视频| 国国产精品蜜臀av免费| 欧美日韩综合久久久久久| 妹子高潮喷水视频| 色哟哟·www| 一级毛片黄色毛片免费观看视频| 纯流量卡能插随身wifi吗| 在线观看国产h片|