• 
    

    
    

      99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

      Magnetic properties and promising cryogenic magneto-caloric performances of Gd20Ho20Tm20Cu20Ni20 amorphous ribbons*

      2021-01-21 02:14:50YikunZhang張義坤BingbingWu吳兵兵DanGuo郭丹JiangWang王江andZhongmingRen任忠鳴
      Chinese Physics B 2021年1期
      關鍵詞:王江

      Yikun Zhang(張義坤), Bingbing Wu(吳兵兵), Dan Guo(郭丹),Jiang Wang(王江), and Zhongming Ren(任忠鳴)

      1State Key Laboratory of Advanced Special Steels,Shanghai University,Shanghai 200072,China

      2Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University,Shanghai 200072,China

      3School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China

      Keywords: microstructure,magneto-caloric effect(MCE),amorphous ribbons,magnetic properties

      Nowadays, the interest in research on magnetic solids with promising magneto-caloric performances has considerably grown due to the potential applications in the field for future magnetic cooling (MC).[1–4]Magneto-caloric effect(MCE) is a magneto-thermodynamic property of magnetic solids, which depends on the interaction between external field and magnetic sub-lattices. Generally,MCE is characterized by two important factors, i.e., magnetic entropy change ΔSMand refrigerant capacity (RC), when the external field changes. Due to special characterizations of promising highefficiency and environmental friendliness, the MCE-based cooling technology would be able to replace the presently available gas compression/expansion cooling technology.[1–4]The Ericsson cycles consisting of two isomagnetic fields and two isothermal processes have been recognized as the best choice for cryogenic MC.For the most ideal Ericsson MC cycles,the magneto-caloric materials should have constant ΔSMin the whole cooling temperature range, i.e., a table-shaped MCE.[5,6]This performance can be indirectly identified with the help of magnitude of RC. Thus, searching for magnetic solids that exhibit promising magneto-caloric materials, especially the ones with a table-shaped performance, is one of the most important issues for MC.For this purpose,magnetic alloys and compounds have been fabricated or designed and systematically checked with their MCE performances.[7–10]

      Moreover, researchers have focused on magneto-caloric performances in some selected heavy rare-earth (RE) rich magnetic alloys in amorphous states due to their promising applications.[11–13]Compared with the crystallized HRE-rich alloys or compounds, the magnetic-entropy-change maxima,i.e., |ΔSM|, for the alloys in amorphous states are usually smaller. However,magnetic transitions for the alloys in amorphous states are somehow broader,since there is no long-range ordering which will widen the peak of|ΔSM(T)|curves. Previous investigations have demonstrated that most of the heavy rare-earth based alloys could be synthesized as amorphous formulae with a similar wide composition region.[14]Moreover,according to the de Gennes factor,i.e.,(gJ-1)2J(J+1),the magnetic phase transition temperature decreases gradually with increasing atomic number from Gd to Tm,which means that Tm-based compounds should possess the lowest phasetransition temperature.[4,5]Therefore, the temperature range of the magnetic phase transition would be further widened by alloying different RE elements with proper ratios, which may induce a table-shaped MCE.On this purpose, the multiple heavy RE-based Gd20Ho20Tm20Cu20Ni20amorphous ribbons were selected and successfully fabricated,and the tableshaped MCE with large RC values were realized.

      The Gd20Ho20Tm20Cu20Ni20alloy ingot was fabricated by arc-melting the bulk metals of Ho, Tm, Gd, Cu, and Ni(purity ≥99.9 wt.%) with Ti-getter under high-purity Argas. The ingots were flipped and re-melted 4 times; and the weight loss was ~0.4 wt.% during this process. Then, the amorphous ribbons with width of 2.0–3.2 mm and thickness of 30–40 μm were obtained from the ingot by the melt-spun method under high-purity Ar-gas using Cu-wheel(33 m/s surface speed). The structures were checked by x-ray diffraction (XRD, Bruker-D8). The microstructure and elemental distribution was determined by a high resolution (HR) transmission electron microscope(TEM)with an attached energydispersive x-ray (EDX) diffractometer (JEOL JEM-2010).The magnetization data was collected using a commercial superconducting quantum interference device(SQUID,QD)and the ribbon is paralleled to the magnetic field to minimize the shape anisotropy effect.

      Figure 1(a) illustrates the XRD pattern of Gd20Ho20Tm20Cu20Ni20spun ribbons. A broad diffraction halo in the angle range of 25?–40?is observed without obvious crystalline diffraction peaks,i.e.,Gd20Ho20Tm20Cu20Ni20ribbons are with amorphous state and without crystalline phases. The microstructure of Gd20Ho20Tm20Cu20Ni20ribbons was examined by HRTEM, as shown in Fig. 1(b).The inset of Fig. 1(b) illustrates the selected area electrondiffraction (SAED) pattern for Gd20Ho20Tm20Cu20Ni20ribbons. The HRTEM image and SAED pattern can further confirm that the present Gd20Ho20Tm20Cu20Ni20ribbons are with full amorphous structures. The EDX mapping results for all the consistent elements (Gd, Ho, Tm, Cu, and Ni) are given in Figs. 1(c)–1(g), respectively, which clearly indicate that all the consistent elements are uniformly distributed in Gd20Ho20Tm20Cu20Ni20amorphous ribbons, and the atom percentages of Gd, Ho, Tm, Cu, and Ni are 19.92 at.%,18.64 at.%, 17.85 at.%, 22.36 at.%, and 21.23 at.%, respectively.

      Figure 2(a) illustrates the M(T) curves for Gd20Ho20Tm20Cu20Ni20amorphous ribbons. One can note that no obvious differences in M(T)curves for H=0.2 T can be found between the zero-field-cooled curve and the field cooled ones. Moreover, the external fields have significant effects on the magnetic transition for Gd20Ho20Tm20Cu20Ni20amorphous ribbons,a pronounced sharp transition from paramagnetic (PM) to ferromagnetic (FM) state happens at Curie temperature TCof 32 K under low H (0.2 T), and the transition is continuously becoming wider with increasing H.Especially, for the 5 and 7 T from 10 to 80 K, an almost linear relationship between the magnetization and temperature is observed, i.e., the magnetic transition is flat and continuous under high magnetic fields. Such a character could be easily identified in the dM/dT versus T data of the Gd20Ho20Tm20Cu20Ni20amorphous ribbons, as represented in Fig.2(b). dM/dT has a significant change from a sharp to a flat and then to a table-like feature with increasing H.

      Fig.1.(a)XRD pattern,(b)HRTEM images,and(c)–(g)EDX mapping for Gd20Ho20Tm20Cu20Ni20 amorphous ribbons. Inset of(b)shows the SAED pattern for Gd20Ho20Tm20Cu20Ni20 amorphous ribbons.

      Fig. 2. (a) The M(T) curves for Gd20Ho20Tm20Cu20Ni20 amorphous ribbons with H up to 7 T. (b) The dMFC/dT versus T for Gd20Ho20Tm20Cu20Ni20 amorphous ribbons.

      Several selected M(H)curves for Gd20Ho20Tm20Cu20Ni20amorphous ribbons are illustrated in Fig. 3(a). At low H,M increases rapidly for lower temperature ones and demonstrates a saturation-like behavior with further increasing magnetic field, i.e., the Gd20Ho20Tm20Cu20Ni20ribbons exhibit a typical behavior as FM ordering amorphous materials.Furthermore, the magnetic phase transition for amorphous Gd20Ho20Tm20Cu20Ni20ribbons is detailedly analyzed by Arrott plots (M2versus H/M) and Banerjee criterion, as illustrated in Fig.3(b).[16]No negative slope or inflection could be found as a character for the first-order magnetic transition,suggesting that the phase transition in the present amorphous Gd20Ho20Tm20Cu20Ni20ribbons is of a second-order type.

      Fig. 3. (a) Selected M(H) data for Gd20Ho20Tm20Cu20Ni20 ribbons.(b)The corresponding plots of H/M vs M2.

      Generally,the ΔSMwith external field change of 0–Hmaxwas evaluated by Maxwell’s thermo-dynamic relation with integrating over the isothermal magnetization curves:[1–3]

      Additionally,Griffith et al. have applied the temperatureaveraged gΔSM(i.e.,TEC)to characterize the magneto-caloric performances.[17]It is described that the MCE materials can reasonably response to the temperature lift (ΔTlift), and it is defined as

      where Tmiddenotes the value of the average temperature.The TEC is calculated at 10 K temperature lift [TEC(10),and the values are 2.39, 4.67, 10.52, and 13.84 J/kg·K for ΔH =0–1, 0–2, 0–5, and 0–7 T,respectively. Obviously, the|ΔSM|maxand TEC(10) values are close to each other with the same ΔH, which is the consequence of the table-shaped MCE and the ΔTliftvalue of 10 K is much lower than the full width at half maximum (δTFWHM) in the ΔSM–T curves for Gd20Ho20Tm20Cu20Ni20ribbons.

      In addition, RC is another crucial parameter which can justify the MCE performances.Detailed description of the calculation method of RC is given in our review articles.[1]The obtained values of δTFWHMare 65.1 and 60.8 K for ΔH =0–7 and 0–5 T, respectively. Correspondingly, the RC values for the present Gd20Ho20Tm20Cu20Ni20amorphous ribbons are evaluated to be 528 and 740 J/kg. The transition temperature (TC), the δTFWHM, |ΔSM|maxand RC values for Gd20Ho20Tm20Cu20Ni20amorphous ribbons and several reported promising magneto-caloric materials with close working temperature span under ΔH = 0–5 T are listed in Table 1. Obviously, these δFWHM, |ΔSM|max, and RC values for Gd20Ho20Tm20Cu20Ni20amorphous ribbons are quite competitive. In other words,the obtained promising MCE parameters for the present Gd20Ho20Tm20Cu20Ni20amorphous ribbons, especially for large values of δFWHMand RC, together with the observed table-shaped MCE,make them considerable for cryogenic MC.

      Table 1. The MCE parameters (TC, gδTFWHM, -ΔSmaxM , RC) for ΔH =0–5 T for Gd20Ho20Tm20Cu20Ni20 and several reported promising magneto-caloric solids with similar TC.

      Acknowledgement

      The authors thank Analysis and Test Center of Shanghai University for providing the instrument.

      猜你喜歡
      王江
      Parkinsonian oscillations and their suppression by closed-loop deep brain stimulation based on fuzzy concept
      誰都要看到的一幅畫
      廣樂高速韶贛北連接線大橋通航水流條件研究
      洛書
      寶藏(2021年12期)2022-01-15 04:19:44
      王江薈國畫系列作品《安仁古八景》
      Effective suppression of beta oscillation in Parkinsonian state via a noisy direct delayed feedback control scheme?
      宋朝“網紅”不好惹
      百家講壇(2019年10期)2019-07-13 13:26:44
      Orientation and alignment during materials processing under high magnetic fields?
      王江作品
      我?guī)惋溩訉W(xué)“站立”
      高青县| 依兰县| 涟水县| 延川县| 新源县| 轮台县| 武城县| 老河口市| 临夏市| 江山市| 普格县| 黄骅市| 白水县| 潼关县| 报价| 凯里市| 贞丰县| 屯留县| 烟台市| 桃园市| 理塘县| 湖州市| 洛川县| 剑河县| 嵊州市| 嘉祥县| 巴林右旗| 新密市| 灵石县| 海林市| 磴口县| 海安县| 盱眙县| 资溪县| 沅陵县| 平顶山市| 响水县| 盖州市| 临沭县| 社会| 虎林市|