• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    A 532 nm molecular iodine optical frequency standard based on modulation transfer spectroscopy*

    2021-05-24 02:28:26FeihuCheng程飛虎NingJin金寧FengleiZhang張風雷HuiLi李慧YuanboDu杜遠博JieZhang張潔KeDeng鄧科andZehuangLu陸澤晃
    Chinese Physics B 2021年5期
    關鍵詞:風雷李慧飛虎

    Feihu Cheng(程飛虎), Ning Jin(金寧), Fenglei Zhang(張風雷), Hui Li(李慧), Yuanbo Du(杜遠博),Jie Zhang(張潔), Ke Deng(鄧科), and Zehuang Lu(陸澤晃)

    MOE Key Laboratory of Fundamental Physical Quantities Measurement,Hubei Key Laboratory of Gravitation and Quantum Physics,PGMF and School of Physics,Huazhong University of Science and Technology,Wuhan 430074,China

    Keywords: iodine-stabilized laser frequency standard, modulation transfer spectroscopy, residual amplitude modulation

    1. Introduction

    High precision length measurement plays an important role in everyday life and many diverse fields. In 1983,the Bureau International des Poids et Measures (BIPM) gave a new definition of length standard and recommended three ways to realize it.[1]One of them is that the length standard can be achieved by locking lasers to hyperfine transition lines of atoms and molecules. Moreover, the BIPM recommended a list of radiations for this realization.[2]As a result,a significant amount of research has been performed on frequency stabilization techniques based on atoms and molecules, and the frequency stabilization technique has been greatly improved.[3–6]A commonly used length standard is the iodine-stabilized laser. Currently, the stability of iodine-stabilized lasers using hyperfine transition lines near 532 nm as frequency references have reached the level of 10?15@1 s,[7,8]which makes them suitable for optical clocks,[9]space based absolute frequency references,[10]and wave-division multiplexing systems for telecommunications systems.[11]

    At present, there are three commonly used methods to lock lasers to hyperfine transitions of atoms and molecules.The first is called saturated absorption spectroscopy(SAS).[12]To eliminate the Doppler effect in saturated absorption spectroscopy, two beams are required: a stronger beam (pump beam)is used to saturate the transition,while another weaker counter-propagating beam (probe beam) is used to probe the saturated transition. In order to enhance the signal and allow weaker features to be observed, the laser is frequency modulated.[13]The gas cell can be inside or outside the laser cavity and use a third harmonic synchronous detection method. This method works well for a 633 nm He–Ne laser with an iodine cell in the cavity. The second method,called optical heterodyne frequency modulation spectroscopy (FMS),[14]is performed by adding phase modulation to the probe beam,and then detecting the differential absorption of the carrier beam and the left and right modulation sidebands when they pass through the saturated medium.The third method is called modulation transfer spectroscopy(MTS).[15,16]It is a method of transferring a modulated signal from a modulated beam to an unmodulated beam through four-wave mixing in a nonlinear medium. The generated sidebands and the original carrier beam enter the photodetector together, and through phase sensitive detection the error signal can be obtained. Because the demodulated signal has the advantages of high sensitivity,high resolution,and insensitivity to the first-order Doppler effect,it has become very popular for laser frequency stabilization.

    Table 1. Summary of the results of the iodine-stabilized laser with the 127I2 R(56)32-0:a10 line as the frequency reference.

    All three methods have been used to reproduce the 532 nm length standard, including JILA in the United States,[9,17,18]NMIJ in Japan,[19]PTB in Germany and ILP in Russia.[20]They use different methods to lock the laser to the R(56) 32-0:a10line of the iodine molecule and study the frequency stability,reproducibility and uncertainty of the system. The results are listed in Table 1. PTB in Germany uses the FMS technique,and has made a detailed evaluation of various frequency shifts in the system, including RAM-induced frequency shift,residual first-order Doppler,shift,servo electronic noise,etc. JILA in the United States and NMIJ in Japan use MTS technology.They have mainly evaluated the pressure shift and power shift in the system, and NMIJ has also evaluated the shifts induced by modulation phase and alignment of the pump and probe beams. ILP in Russia uses SAS technology and then detects fluorescence signals,so the system is not sensitive to beam pointing jitter. It has mainly evaluated residual first-order Doppler shift,the beam coincidence effect,etc.

    In this work, we report construction of an iodinestabilized laser frequency standard based on MTS technology. The laser is locked to the R(56) 32-0:a10line, and the frequency stability is measured to better than 3.0×10?14for averaging times from 0.1 s to 30 s. After several on–off measurements of the iodine-stabilized laser with an optical frequency comb, the reproducibility of the system is found to be 3.5×10?13, the best among all systems reported so far, demonstrating excellent stability of our setup. Unlike previous works in MTS, we have done a detailed evaluation of the systematic shifts, including RAM-induced frequency shift,pressure-induced frequency shift,power-induced frequency shift, beam pointing-jitter induced frequency shift,electronic servoinduced frequency shift, demodulation phase offset induced frequency shift, iodine impurity induced frequency shift,etc.

    The RAM induced frequency shift has been evaluated in the FMS.[20]The phase modulation is applied directly on the probe beam, so the RAM effect is much easier to evaluate.However,in the MTS,the phase modulation is applied on the pump beam,and it is well known that the MTS mainly uses the third-order nonlinear four-wave mixing effect, and four-wave mixing is a phase-sensitive process. The efficiency of this process is strongly affected by the phase matching conditions.This means the modulation signal (including phase modulation and amplitude modulation) cannot be transferred to the probe beam when it is far away from resonance. Therefore,in the open-loop situation, it is impossible to directly detect the probe beam RAM effect. To solve this problem, we theoretically deduced the MTS signal with RAM under large modulation depth, and proved that the non-symmetric shape of the MTS signal was directly related to the MTS effect. The nonsymmetric shape factor r can be calibrated with a frequency comb, and in real experiments, this r value can be obtained by least-squares fitting of the MTS signal,from which we can infer the RAM induced frequency shift.

    After taking all the frequency shifts into account,our iodine based standard has a frequency uncertainty of 5.3 kHz,corresponding to a relative uncertainty of 9.4×10?12.The corrected transition frequency has a difference from the BIPMrecommended value of 1 kHz,which is within 1σ uncertainty.Our experimental results agree with the BIPM general guideline on the the expression of uncertainty. The system stability is three times better than the reproducibility, and the reproducibility is three times better than the total uncertainty (3-3 rule),[21]demonstrating a good attribute of length standard.

    2. Experimental setup

    The 532 nm system has been proven to be one of the most important wavelength standards in the visible range. A large number of transition lines are found in the visible wavelength region of127I2; these transition lines come from the B ←X system. Here, B is the excited electronic state and X is the ground electronic state. Under the Born–Oppenheimer approximation, the total energy of molecular iodine is decomposed into molecular vibrational energy, molecular rotational energy and vertical electronic energy. The vibrational energy comes from the vibrational motion between atoms in the molecular iodine, and the rotational energy comes from the rotation of atoms around a certain axis. The vertical electronic energy comes from the electronic configuration between molecular electronic states. Figure 1 shows the simplified R(56)32-0 transition of127I2. In the figure,ν is the vibrational quantum number,J is the rotational quantum number,and′(′′)indicate the upper(lower)energy levels,respectively.

    Fig.1. Simple representation of ro-vibrational transitions of the B ←X system of 127I2 for R(56)32-0.

    For a rigid diatomic molecular the selection rules that the transition needs to meet are ΔJ = J′?J′′= ±1 and Δυ =υ′?υ′′/=0. Usually the ro-vibrational transition energy level is denoted as b(J)ν′?ν′′, where b represents the branch (R branch or P branch),the P branch corresponds to ΔJ=?1,and the R branch corresponds to ΔJ=+1. Because of hyperfine interactions, each ro-vibrational level is further split into hyperfine levels. Thus,a ro-vibrational transition contains many hyperfine components. When the rotational quantum number of the ground state is even,there are 15 hyperfine lines;when the rotational quantum number of the ground state is odd,there are 21 hyperfine lines. For the R(56)32-0 transition,there are 15 hyperfine transition lines.

    The experimental setup is shown in Fig. 2. It includes the iodine frequency stabilization part(Fig.2 bottom part)and the optical frequency comb part(Fig.2 top part).[22]We used a Nd:YAG laser (Coherent Prometheus-100NE) as the light source,which could output 1064 nm and 532 nm at the same time,and the maximum output powers of 1064 nm and 532 nm were 2 W and 100 mW,respectively.

    Fig. 2. Experimental setup. Top part, optical frequency comb part; bottom part, iodine frequency stabilization part. FC, fiber coupler; PBS,polarization beam splitter;λ/2,half-wave plate;L,lens;M,mirror;EOM,electro-optic modulator;AOM,acousto-optic modulator;LPF,low-pass filter;PD,photodetector;BPF,band-pass filter.

    For the iodine frequency stabilization part, the 532 nm laser beam first passed through an optical isolator, and then passed through a half-wave plate and a high extinction ratio(5000:1) PBS (PBS1 in Fig. 2). PBS1 was used to divide the laser beam into a strong pump beam and a weak probe beam. The polarization directions of these two beams were perpendicular to each other. The radii of the two beams were both 1.5 mm,the powers of the two beams were 2.0 mW and 1.5 mW, respectively, and the power ratio was controlled by a half-wave plate placed in front of PBS1. The probe beam passed through an 80 MHz AOM,and the zeroth-order beam was chosen for power stabilization. For the pump beam, the first-order beam was chosen for power stabilization. An EOM was used for phase modulation with a modulation frequency of 310 kHz. The two beams were reflected multiple times inside the iodine cell with a length of 30 cm while remaining overlapped with each other, and the signal sideband was transferred from the modulated pump beam to the unmodulated probe beam through a four-wave mixing process. Before entering the iodine cell,the probe beam passed through PBS2 to split part of the beam as a reference beam. The effective light and iodine interaction length is about 1 m. Photodetector PD4 was used to detect the optical heterodyne beat signal.The beat signal was demodulated by a lock-in amplifier to generate the error signal. The error signal was used to servo control the laser frequency through a servo system. Laser frequency stabilization was realized by feeding back the error signal to the laser PZT with a bandwidth of about 13 kHz,and to the laser temperature control with a bandwidth of 0.1 Hz.

    After the laser was locked, an optical frequency comb(OFC)was used to evaluate the various frequency shifts. The 1064 nm laser output was transmitted to the comb experimental platform through a 5 m long single-mode fiber. Then, the laser light and the comb light were combined and coupled into an optical fiber after passing through PBS4. The emitted light passed through a grating,and then entered an avalanche detector after passing through a reflector and an iris. The purpose of the iris was to block other spectral components of the light and reduce background noise. A hydrogen maser(Microsemi MHM 2010)was used as the frequency reference for the OFC.

    3. Experimental results

    3.1. Frequency stability

    In order to evaluate the frequency stability of our iodinestabilized laser, we beat the iodine-stabilized laser with an ultra-stable laser that has a stability of better than 1.2×10?14for averaging times from 0.1 s to 10000 s.[23]Figure 3 shows the locked laser frequency stability,which is represented with Allan deviation. It can be seen from Fig. 3 that the laser frequency stability is better than 3.0×10?14for averaging times from 0.1 s to 30 s.

    Fig.3. Frequency stability of the iodine-stabilized laser.

    The frequency stability of our system is still not as good as that reported by other groups.[7,8,17,24]Therefore,we analyzed several contributing factors in the system, including pressure, optical power jitter, beam pointing jitter, etc.Through the analysis, we found that the current limiting factors of our system are mainly beam pointing jitter noise and optical power noise. Figure 4 shows the frequency noise of the iodine-stabilized laser and the equivalent frequency noise of pointing jitter and pump power.It can be seen that the pointing jitter equivalent frequency noise and frequency noise of the iodine-stabilized laser are consistent in the frequency range of 1 mHz to 0.25 Hz,and pump power fluctuations also have an impact at lower frequency. Therefore,the next step is to use a special assembly integration technique to connect the optical components to a glass baseplate with a low thermal expansion coefficient to realize high beam pointing stability and further improve the power stability. However,the achieved frequency stability is already good enough for us to evaluate the system reproducibility and systematic uncertainty according to the 3-3 rule.

    Fig.4. Frequency noise amplitude spectral density(ASD)of the beatnote at 1064 nm between the iodine-stabilized laser and the ultra-stable laser. Pointing jitter equivalent frequency noise. Pump intensity equivalent frequency noise.

    3.2. Frequency reproducibility

    As a good length standard, not only good frequency stability but also good reproducibility is required. It has been verified that when different OFCs are referenced to the same reference source, their measurement deviation is less than 10?16.[25]Therefore, we used the OFC to measure the frequency of the iodine-stabilized laser 11 different times on different days. The hydrogen maser was used as the reference for the OFC, with its absolute frequency calibrated by a Cs beam clock (Tongxiang Technology, BD 1024) and a GNSS receiver (Septentrio Satellite Navigation, PolaRx4TR Pro) through real-time comparison. Figure 5 shows the frequency reproducibility of our system. The standard deviation from the average is 0.2 kHz, corresponding to a relative uncertainty of 3.5×10?13. The result is the best among reported values,demonstrating the excellent stability of our setup.

    Fig.5. Frequency reproducibility of the iodine-stabilized laser.

    3.3. Frequency uncertainty

    In order to obtain the absolute frequency value and the systematic uncertainty of the 532 nm optical frequency standard, it is necessary to evaluate different noise sources in the system. The main noise sources include RAM-induced frequency shift, pressure shift, power shift, beam pointing-jitter induced frequency shift,iodine impurity and some other shifts.

    3.3.1. RAM-induced frequency shift

    Electro-optic modulators (EOMs) are one of the key devices used in the MTS technology. By applying an electric field between the electro-optical material inside a modulator,the refractive index of the optical material can be changed.[26]Therefore,when a pump beam passes through the modulator,it will generate sidebands spaced about the carrier frequency at multiples of the applied modulation frequency. Ideally, an EOM for phase modulation should only generate purely phasemodulated light. However,a well-known problem with EOMs is that they generate unwanted synchronous RAM.[27–30]In optical frequency reference applications,this unwanted amplitude modulation leads to frequency offset and frequency fluctuation,and thus degrades the frequency accuracy and stability of the frequency standards.

    The same RAM effect will also affect the accuracy of the frequency standard. As stated in the above,the RAM induced frequency shift can be directly evaluated in the FMS since the phase modulation is applied directly on the probe beam. However,in the MTS,the phase modulation is applied on the pump beam,so the evaluation of the RAM effect on the probe beam is not that straightforward. To solve this problem,we first analyze the MTS signal obtained without and with RAM.

    The MTS signal comes from demodulation of the beat signal of the modulation transfer light ω±? with the original unmodulated light ω. The time variation of the probe field can be expressed as

    where ω =2π f. The pump beam after going through a phase modulator with a pure phase modulation at frequency ? can be expressed as

    In this expression, β represents the modulation index. After Fourier decomposition,Eq.(2)can be written as

    where Jn(β) is the nth-order Bessel function, which defines the relative amplitudes of the carrier and the modulation sidebands. If we only consider pure phase modulation, the magnitudes of the left and right modulation sidebands are equal,Jn(β)=(?1)nJ?n(β). After the phase modulation,the pump beam and the probe beam undergo four-wave mixing in the iodine cell, and then the probe beam is incident on a photoreceiver. The photocurrent beat signal has the following form:[31,32]

    where

    Here,I0and I1are the incident probe and pump beam intensity,l is the effective laser interaction length, α is the absorption coefficient, K is related to the response of the photodetector and other scaling constants of the system,and IAis the saturation intensity and is wavelength dependent. γ and ω0are the half-width-full-maximum (HWFM) and the angular resonant frequency of the hyperfine transition, respectively. φsigis the detection phase. The interaction of the pump and probe beams inside the gas cell can be explained using a third-order nonlinear perturbation theory. Using a phase modulation signal cos(?t+φref) to demodulate the beat signal and then pass it through a low pass filter,the final error signal can be expressed as

    where θ =φsig?φref,the cos term corresponds to the in-phase signal,and the sin term corresponds to the quadrature signal.

    In reality there is no pure phase modulation, no matter whether an EOM or an acousto-optic modulator (AOM) is used as the phase modulator. Since RAM cannot be avoided completely,Eq.(3)needs to be rewritten as

    where the magnitudes of the left and right modulation sidebands are not equal, Hn(β)/=(?1)nH?n(β). According to Ref.[33],amplitude modulation and phase modulation are independent of each other. Therefore,we can express the magnitudes of the left and right modulation sidebands as the sum of pure amplitude modulation Anand pure phase modulation Fn,

    Substituting Eqs.(8a)and(8b)into Eq.(7),the expression for the pump field becomes

    When the pump beam and the probe beam are overlapped and counter-propagating within the gas cell,the interaction between the phase-modulated and amplitude-modulated components of the pump beam and the probe beam produces a modulated signal through the four-wave mixing process. The demodulated error signal, which includes the RAM effect, can be expressed as

    where r=An/Fnrepresents the ratio of the magnitude of the nth-order amplitude modulation to that of the nth-order phase modulation. In Eq. (10), the first half of the righthand side of the equation describes the signal generated by the phase modulation (PM) component, and the second half is generated by the amplitude modulation (AM). In order to obtain a higher SNR,a modulation index greater than 1 is used in actual experiments. Here,we assume that the modulation index β =2.3,and because the fourth-and higher-order interactions are small,we only consider the interference of the carrier and the first-order sideband,the first-and second-order sidebands,and the interaction of the second- and third-order sidebands.It can be seen from the figure that a combined phase- and amplitude-modulated pump beam distorts the shape of the error signal and causes the locking point to shift away from the center of the dispersive line.

    Fig. 6. Theoretical analysis of MTS error value at different r values when the frequency of the laser resonates with the hyperfine transition. The inset shows the MTS signal predicted by Eq. (10). Here, only the in-phase signal and the third-order sidebands are taken into account,the modulation frequency(?)and HWFM(γ)are set to be 310 kHz and 550 kHz,respectively,and r is set to be ?0.02.

    Fig. 7. Measured absolute frequency offset at different r values. The offset frequency is the measured frequency subtracted by the frequency without RAM.The inset shows the MTS experimental results fitted by Eq.(10).

    To quantitatively analyze Eq. (10), the other coefficients in Eq. (10) were treated as constants. We obtained the demodulation voltage of MTS at the resonance frequency under different r values. We chose several different r values. The results are shown in Fig.6.It shows that when the laser resonates with the hyperfine transitions of the atoms or molecules, the demodulated MTS error signal has a linear relationship with different r values,which causes the locked laser frequency to deviate from the resonance frequency. Because the frequency shift after locking has a linear relationship with the r value under realistic experimental conditions, we can measure the relationship between the r value and the frequency shift caused by the RAM to obtain a calibration formula.

    In order to verify our prediction, we changed the system’s signal line shape by changing the overlapping of the two beams in the system, which had the effect of changing r, and measured the absolute frequency with an optical frequency comb. According to Eq. (10), the parameters to be fitted include K,γ,?,β,θ,r,ω0,and for other parameters one can use the reported results. Since the modulation frequency is 310 kHz, ? =0.31 MHz. During the first fitting, the initial values of other parameters were set to 151, 1.1 MHz, 0,0, 563260063.5 MHz respectively. In principle, this process needs to be repeated many times to make the fitting error as small as possible. The assumption here is that if the fitting error is less than 0.05,the fitting result is considered good.After we found the K,γ,β,θ,ω0obtained from the first fitting, we fixed them and only used r as the fitting parameter of the subsequent experimental data to obtain a high-precision r value.The experimental results are shown in Fig.7;the inset is one of the fitting results.It can be seen that there is a good linear relationship between the offset frequencies and the r values. From this figure, we find the slope is ?(4.5±0.3) MHz. The offset frequency is the measured frequency subtracted by the first measured frequency. Therefore, we can evaluate the RAMinduced frequency shift in our system using this linear relationship by simply finding the value of r in each measurement.The value of r is obtained through fitting of the experimental line shape. We took the average of multiple fittings, and obtained r=0.0008(2),which corresponded to a frequency shift of 3.6±0.9 kHz.

    3.3.2. Pressure shift

    The variation of pressure in the iodine cell will contribute to the frequency shift. Figure 8 shows the experimental results of pressure shift. According to the empirical formula of saturated vapor pressure in the iodine cell,[34]the coldfinger temperature of the iodine cell is changed from ?15°C to ?3°C, and the corresponding pressure in the iodine cell is from 0.82 Pa to 3.03 Pa. The power of the two beams is maintained during the measurement. After linear fitting the measured results, the pressure shift slope is determined to be?7.3±0.1 kHz/Pa. Since the cold-finger temperature is controlled at ?15°C, there is some solid-state iodine in the iodine cell, so we set the uncertainty of pressure inside iodine cell to be <0.01 Pa,which leads to a frequency uncertainty of<0.1 kHz.

    Fig.8. Pressure shift of component a10 of R(56)32-0.

    3.3.3. Power shift

    Another sensitive parameter is the pump power. We changed the pump power from 1.0 mW to 4.0 mW with an interval of 0.5 mW and kept the probe power unchanged. Figure 9 shows the measured power shift. When we measured the power shift, the temperature of the cold finger was kept at ?15°C. Six pump-laser power points were taken, and the measurement was repeated five times for each point. Finally,the slope was fitted to be 1.0±0.2 kHz/mW.The pump power used in the experiment was 2.0 mW,and we assumed that the uncertainty of the pump laser power was 1%. Therefore, the total uncertainty of the power shift was 0.4 kHz.

    Fig.9. Power shift of component a10 of R(56)32-0.

    3.3.4. Iodine-impurity-induced frequency shift

    Iodine impurity in the iodine cell can also cause a frequency shift. Because our laboratory does not have a calibrated iodine cell with the BIPM, the frequency shift caused by iodine impurity cannot be given directly. According to Ref. [35], the iodine impurity in the iodine cell can be expressed indirectly by the Stern–Volmer coefficient. The smaller the coefficient, the higher the iodine purity, and the smaller the frequency shift caused by this effect. This coefficient can be measured by the laser-induced fluorescence(LIF)method. Therefore, in order to evaluate the frequency shift caused by iodine impurity, we measure the Stern-Volmer coefficient in our system. The experimental results are shown in Fig.10(a). After linear fitting,the Stern-Volmer coefficient is K0=0.92±0.03 Pa. We have collected statistics on the reported results of the relationship between the Stern–Volmer coefficient and frequency shift.[36–38]The results are shown in Fig. 10(b). Comparing our measured Stern–Volmer coefficients with those in the literature,we estimate the frequency shift caused by iodine impurity in our system to be about 5 kHz with an uncertainty of 5 kHz.

    Fig. 10. (a) Experimental result of the Stern–Volmer coefficient measured by the LIF method. (b) Statistical results of the relationship between the Stern-Volmer coefficient and absolute frequency shift. Data are taken from Refs.[36–38]. Among them,the blue star points come from Chartier et al.(1992), the black triangle points come from Zucco et al. (2013) and the green square points come from Hrabina et al. (2017).

    3.3.5. Other frequency shifts

    Due to the long effective optical path in the iodine cell,the vibration of the platform and the release of the mechanical stress of the optical frame will change the beam pointing of the two beams, which will also affect the locked laser frequency.By slightly adjusting the angle between the two beams, the relationship between the angle and locked laser frequency is measured to be 15±3 Hz/μrad according to Fig. 11(a). Assuming there is a jitter of 80 μrad in the beam pointing, the frequency uncertainty is 1.2 kHz.

    We also measure the uncertainty caused by the demodulation phase deviation and the servo electronics noise.By changing the demodulation phase and applying square-wave modulation to the locked loop, it is found that their influence on locked frequency is 94±8 Hz/degree and 2.8±0.1 kHz/mV,respectively. Figure 11(b)shows the measured frequency shift due to the demodulation phase. The jitter for the demodulation phase is less than one degree and the noise in the servo electronics is less than 0.1 mV in our system, so their contributions to the frequency uncertainty are 0.1 kHz and 0.3 kHz,respectively. In addition, it is reported that the jitter of the modulation width(that is,modulation index)will also change the laser frequency,so we evaluate this effect by changing the modulation width in our system. The experimental results are shown in Fig. 11(c). The measured modulation width jitter slope is ?0.20±0.05 kHz/kHz.Assuming that there is a 0.1%uncertainty in the modulation width,the frequency uncertainty it causes is about 0.2 Hz.

    Fig. 11. Some other frequency shifts of component a10 of R(56)32-0:(a)Alignment of the pump-and probe-beam-induced frequency shift.(b)Demodulation phase offset-induced frequency shift. (c) Modulation width offset-induced frequency shift. (d)SNR of the beat signal induced frequency shift.

    The signal-to-noise ratio (SNR) of the beat signal will also affect the measured laser frequency. A low SNR will lead to a large measured frequency deviation in the frequency counter. Figure 11(d)shows the relationship between the beat SNR and the measured laser frequency. It can be seen from this figure that when the SNR is less than 20 dB, the measured frequency value will have a large deviation, and when the SNR is greater than 25 dB, the measured frequency will not be affected. In our experiment,the SNR is always kept at 35 dB, so this effect on frequency can be ignored. Since the OFC is phase locked to the hydrogen maser, the deviation of the hydrogen maser clock frequency will lead to a frequency shift. During our experiment, the absolute frequency deviation between our hydrogen maser and International GNSS Service Time(IGST)was ?5.6×10?13,and the deviation between IGST and our Cs beam clock was ?3.5×10?13,so the deviation between the hydrogen maser and the Cs beam clock was ?9.1×10?13. Considering the link noise of the hydrogen reference, the relative uncertainty introduced by the frequency measurement was ?2×10?12, which corresponds to an optical frequency at 532 nm of about 1.1 kHz. In Table 2,we summarize the main uncertainties caused by different contributing factors for the iodine-stabilized laser. The total uncertainty is 5.3 kHz,corresponding to a relative uncertainty of?9.4×10?12.

    Table 2. Major contributions to the uncertainty of the iodine-stabilized Nd:YAG laser.

    With the OFC,we measure the laser frequency when it is locked to the R(56)32-0:a10hyperfine transition of iodine and the cold-finger temperature of the iodine cell is set to ?15°C.The averaged frequency is 563 260 223 505.8(2)kHz.Because we set the cold finger of the iodine cell at ?15°C, which is consistent with the conditions given by the BIPM,so this frequency shift does not need to be considered. The light intensity of the pump laser used in our system is 28 mW/cm2,which is also within the range given by BIPM,so this frequency shift is not deducted. Considering the RAM noise,iodine impurity and OFC reference,the absolute frequency for the a10component of the R(56)32-0 transition is 563 260 223 514.9 kHz with a total uncertainty of 5.3 kHz in our system.Our measurement result has 2 kHz difference from BIPM’s recommended value(fBIPM=563260223513(3)kHz)for this line and agrees with it within 1σ uncertainty.

    4. Conclusion

    In conclusion, we built an iodine frequency-stabilized laser system based on MTS technology.The system frequency stability is less than 3.0×10?14for averaging times from 0.1 s to 30 s, and the reproducibility is 3.5×10?13. We performed comprehensive evaluation of the systematic shifts in the iodine frequency stabilization system. We proposed a method to evaluate the RAM-induced frequency shift, which is difficult to evaluate in MTS. Finally, the corrected absolute frequency was 563 260 223 514.9 kHz with a relative uncertainty of 9.4×10?12. The frequency uncertainty of the locked laser can be further improved by more precisely evaluating the effect of iodine impurity.

    猜你喜歡
    風雷李慧飛虎
    李慧、趙柳作品
    李慧作品選登
    “垂直風雷”直-8
    我和我的“作家夢”
    陳飛虎·水彩畫《無題》
    破陣子·觀電影《鐵道飛虎》有感
    飛虎
    黃河之聲(2017年10期)2017-08-09 01:31:12
    Ecological problems identification in our country
    Artificial neural network modeling of mechanical properties of armor steel under complex loading conditions
    救救小象
    精品国产露脸久久av麻豆 | 国产成人免费观看mmmm| 草草在线视频免费看| 国产成人免费观看mmmm| 六月丁香七月| 嘟嘟电影网在线观看| 日本一本二区三区精品| 成人亚洲欧美一区二区av| 免费高清在线观看视频在线观看| 黑人高潮一二区| 大片免费播放器 马上看| 麻豆精品久久久久久蜜桃| 一级爰片在线观看| 亚洲精品aⅴ在线观看| 久久国产乱子免费精品| 2018国产大陆天天弄谢| 最近手机中文字幕大全| 午夜久久久久精精品| 99re6热这里在线精品视频| 成人毛片60女人毛片免费| av免费观看日本| 舔av片在线| 人妻少妇偷人精品九色| 天堂影院成人在线观看| 精品酒店卫生间| 亚洲精品乱码久久久久久按摩| 国产成人91sexporn| 搡老妇女老女人老熟妇| 国产黄色视频一区二区在线观看| 久久这里有精品视频免费| 欧美日韩综合久久久久久| 亚洲精品久久久久久婷婷小说| 99久久中文字幕三级久久日本| 国产黄色小视频在线观看| 久99久视频精品免费| 国产大屁股一区二区在线视频| 午夜精品一区二区三区免费看| 免费不卡的大黄色大毛片视频在线观看 | 国产乱人偷精品视频| 免费黄频网站在线观看国产| 高清毛片免费看| 小蜜桃在线观看免费完整版高清| 80岁老熟妇乱子伦牲交| 波野结衣二区三区在线| 免费观看av网站的网址| 搞女人的毛片| 最近中文字幕2019免费版| 天堂中文最新版在线下载 | 精品久久久久久成人av| 欧美xxxx黑人xx丫x性爽| 夫妻午夜视频| 舔av片在线| 日本av手机在线免费观看| 亚洲av电影在线观看一区二区三区 | 国产熟女欧美一区二区| 黄色配什么色好看| .国产精品久久| 身体一侧抽搐| 国产成人福利小说| 韩国av在线不卡| 人人妻人人看人人澡| 两个人的视频大全免费| 少妇的逼好多水| 插阴视频在线观看视频| 日韩欧美国产在线观看| 你懂的网址亚洲精品在线观看| 少妇人妻一区二区三区视频| 偷拍熟女少妇极品色| 国产精品一区www在线观看| 最近最新中文字幕大全电影3| 亚洲成色77777| 婷婷六月久久综合丁香| 丰满少妇做爰视频| 国产探花在线观看一区二区| 中文天堂在线官网| 亚洲av一区综合| 超碰97精品在线观看| 久久久欧美国产精品| 午夜福利网站1000一区二区三区| 美女黄网站色视频| 久久久久精品性色| 国产激情偷乱视频一区二区| 国产乱人视频| 国产av国产精品国产| 亚洲成人一二三区av| 国产精品人妻久久久久久| 精品熟女少妇av免费看| 人人妻人人澡欧美一区二区| 一级二级三级毛片免费看| 九九久久精品国产亚洲av麻豆| 精品人妻视频免费看| 国产一区二区三区av在线| 国产乱人视频| 男女下面进入的视频免费午夜| 国产精品一及| 国产男人的电影天堂91| 2018国产大陆天天弄谢| 国产精品三级大全| 国产黄片视频在线免费观看| 亚洲婷婷狠狠爱综合网| 亚洲高清免费不卡视频| 国内精品宾馆在线| 精品人妻熟女av久视频| 国产麻豆成人av免费视频| 欧美丝袜亚洲另类| 亚洲精品乱码久久久v下载方式| 日本三级黄在线观看| 国内精品一区二区在线观看| 日韩伦理黄色片| 久久97久久精品| 成年av动漫网址| 精品国产一区二区三区久久久樱花 | 性插视频无遮挡在线免费观看| 如何舔出高潮| 亚洲经典国产精华液单| 最新中文字幕久久久久| 午夜福利视频1000在线观看| 日韩一区二区视频免费看| 久久久久久九九精品二区国产| 少妇的逼好多水| 久久人人爽人人片av| 亚洲精品一二三| 国产一区二区三区av在线| 一夜夜www| 中文字幕亚洲精品专区| 在线天堂最新版资源| 丰满人妻一区二区三区视频av| 国语对白做爰xxxⅹ性视频网站| 精品久久久久久久久久久久久| .国产精品久久| xxx大片免费视频| 又爽又黄a免费视频| kizo精华| 色吧在线观看| 国产乱来视频区| 日本熟妇午夜| 亚洲熟妇中文字幕五十中出| 最近2019中文字幕mv第一页| 国产成人freesex在线| 日韩中字成人| 日韩欧美精品免费久久| 国产 一区 欧美 日韩| 国产有黄有色有爽视频| 成人特级av手机在线观看| 秋霞在线观看毛片| 久久久久久久久久人人人人人人| 国产亚洲91精品色在线| 亚洲精品第二区| 久久久久久久久久成人| 国产精品久久久久久精品电影| 亚洲欧美清纯卡通| 久久久久久久久久成人| 国产成人91sexporn| 午夜福利视频1000在线观看| 日韩欧美一区视频在线观看 | 免费看日本二区| 国产高清不卡午夜福利| 麻豆国产97在线/欧美| 欧美xxxx性猛交bbbb| kizo精华| 国产 亚洲一区二区三区 | 欧美成人一区二区免费高清观看| 亚洲在线观看片| 日韩人妻高清精品专区| 久久综合国产亚洲精品| 女的被弄到高潮叫床怎么办| 色网站视频免费| 九色成人免费人妻av| 免费在线观看成人毛片| 成年版毛片免费区| 色哟哟·www| 欧美3d第一页| 日本-黄色视频高清免费观看| 麻豆国产97在线/欧美| 国产视频内射| 永久网站在线| 女人十人毛片免费观看3o分钟| 久久久久久久久久久丰满| 欧美三级亚洲精品| 久久6这里有精品| 内地一区二区视频在线| 永久免费av网站大全| av一本久久久久| 午夜精品国产一区二区电影 | 国产精品综合久久久久久久免费| 一区二区三区四区激情视频| 成人美女网站在线观看视频| 久久99蜜桃精品久久| 日韩av在线大香蕉| 亚洲精品一二三| 精品一区二区免费观看| 亚洲欧美一区二区三区国产| 亚洲人成网站在线观看播放| 看非洲黑人一级黄片| 最后的刺客免费高清国语| 亚洲在线自拍视频| 日本午夜av视频| 久久久色成人| 伦理电影大哥的女人| 我的女老师完整版在线观看| 欧美xxxx性猛交bbbb| 搞女人的毛片| 丰满乱子伦码专区| av在线老鸭窝| 成人国产麻豆网| 能在线免费观看的黄片| 国产精品.久久久| 一级片'在线观看视频| 久久久久性生活片| 国产午夜福利久久久久久| 国产亚洲午夜精品一区二区久久 | 人妻一区二区av| 亚洲av.av天堂| 三级毛片av免费| 国产白丝娇喘喷水9色精品| 国产精品人妻久久久影院| 免费黄色在线免费观看| 伦理电影大哥的女人| 日韩精品有码人妻一区| 欧美性猛交╳xxx乱大交人| 精品久久久精品久久久| 欧美日韩亚洲高清精品| 日韩电影二区| 22中文网久久字幕| 天堂√8在线中文| 亚洲欧洲日产国产| 大香蕉97超碰在线| 18禁动态无遮挡网站| 熟妇人妻久久中文字幕3abv| 亚洲欧美一区二区三区黑人 | 国产三级在线视频| 18禁在线播放成人免费| 少妇熟女欧美另类| 久久久久久久久久成人| 国产麻豆成人av免费视频| 久久精品夜色国产| 亚洲国产精品国产精品| 欧美+日韩+精品| 国产精品综合久久久久久久免费| 亚洲精品乱久久久久久| 一个人免费在线观看电影| 国产乱来视频区| 日韩电影二区| 免费观看av网站的网址| 国内揄拍国产精品人妻在线| or卡值多少钱| 麻豆成人午夜福利视频| 欧美 日韩 精品 国产| 国产成人午夜福利电影在线观看| 国产高清不卡午夜福利| 人人妻人人澡欧美一区二区| 国产精品日韩av在线免费观看| 亚洲精品国产av成人精品| 又爽又黄无遮挡网站| 97超碰精品成人国产| 在线观看av片永久免费下载| 国产成人福利小说| 天堂俺去俺来也www色官网 | 免费av不卡在线播放| 久久久久久久大尺度免费视频| 亚洲在线观看片| 亚洲激情五月婷婷啪啪| 高清av免费在线| 三级毛片av免费| 国产成人freesex在线| 亚洲成人精品中文字幕电影| 久久久精品欧美日韩精品| 日本欧美国产在线视频| 成人二区视频| 欧美激情久久久久久爽电影| 婷婷色麻豆天堂久久| 国产精品日韩av在线免费观看| 毛片女人毛片| 美女被艹到高潮喷水动态| 亚洲第一区二区三区不卡| 亚洲美女视频黄频| 久久久久九九精品影院| 极品少妇高潮喷水抽搐| 波野结衣二区三区在线| 日韩精品有码人妻一区| 久久97久久精品| 国产乱人偷精品视频| 久久鲁丝午夜福利片| 亚洲乱码一区二区免费版| 亚洲最大成人av| 如何舔出高潮| 网址你懂的国产日韩在线| 亚洲乱码一区二区免费版| 久久久久久国产a免费观看| 男人爽女人下面视频在线观看| 十八禁国产超污无遮挡网站| www.av在线官网国产| 神马国产精品三级电影在线观看| 久久久久久久久大av| 久久午夜福利片| 国产久久久一区二区三区| 网址你懂的国产日韩在线| 欧美日韩精品成人综合77777| 色播亚洲综合网| 国产91av在线免费观看| 三级经典国产精品| 亚洲欧洲国产日韩| 国产高清有码在线观看视频| 人妻少妇偷人精品九色| 蜜桃亚洲精品一区二区三区| 亚洲最大成人中文| 色综合亚洲欧美另类图片| 18禁在线播放成人免费| 亚洲熟女精品中文字幕| 一级片'在线观看视频| 在线免费十八禁| 特级一级黄色大片| 26uuu在线亚洲综合色| 国精品久久久久久国模美| 欧美 日韩 精品 国产| 成人亚洲精品一区在线观看 | 日韩制服骚丝袜av| 欧美成人一区二区免费高清观看| 国产91av在线免费观看| 国产精品一区二区三区四区免费观看| 99久久精品热视频| 久久国内精品自在自线图片| 亚洲精品一区蜜桃| 亚洲欧美精品自产自拍| 日本猛色少妇xxxxx猛交久久| 国产精品久久久久久精品电影小说 | 亚洲乱码一区二区免费版| 少妇猛男粗大的猛烈进出视频 | 中文在线观看免费www的网站| 夫妻性生交免费视频一级片| 亚洲精品成人久久久久久| 天美传媒精品一区二区| 国产精品精品国产色婷婷| 日本与韩国留学比较| 国产男人的电影天堂91| 卡戴珊不雅视频在线播放| 麻豆av噜噜一区二区三区| 久久这里有精品视频免费| 男女边摸边吃奶| 国产av国产精品国产| 乱码一卡2卡4卡精品| 成人毛片60女人毛片免费| 中国国产av一级| 丝瓜视频免费看黄片| 老司机影院毛片| 又粗又硬又长又爽又黄的视频| 少妇熟女欧美另类| 亚洲电影在线观看av| 五月玫瑰六月丁香| 女人被狂操c到高潮| 国产精品一区二区在线观看99 | 久久这里只有精品中国| 久久97久久精品| 精品亚洲乱码少妇综合久久| 国产男女超爽视频在线观看| 在线免费观看的www视频| 欧美成人a在线观看| 日日啪夜夜爽| 久久久亚洲精品成人影院| 搡老乐熟女国产| 亚洲美女搞黄在线观看| 国产高清不卡午夜福利| 亚洲一级一片aⅴ在线观看| 99久久精品国产国产毛片| 日韩一区二区视频免费看| 亚洲精品日韩在线中文字幕| 视频中文字幕在线观看| 色尼玛亚洲综合影院| 日本-黄色视频高清免费观看| 淫秽高清视频在线观看| 精品久久久久久成人av| 三级国产精品欧美在线观看| 在线a可以看的网站| 日韩国内少妇激情av| 亚洲成人中文字幕在线播放| 一区二区三区乱码不卡18| 日日啪夜夜爽| 你懂的网址亚洲精品在线观看| 搡女人真爽免费视频火全软件| 日本黄大片高清| 亚洲av福利一区| 久久人人爽人人片av| kizo精华| 美女国产视频在线观看| 五月天丁香电影| www.av在线官网国产| 国产爱豆传媒在线观看| 日日啪夜夜爽| 美女脱内裤让男人舔精品视频| 国产男人的电影天堂91| 亚洲成人一二三区av| 最近中文字幕2019免费版| 激情五月婷婷亚洲| 国产久久久一区二区三区| 色网站视频免费| 久久精品综合一区二区三区| 超碰97精品在线观看| 精品酒店卫生间| 九色成人免费人妻av| 亚洲一区高清亚洲精品| 99久久九九国产精品国产免费| 我的女老师完整版在线观看| 久久久色成人| 久久鲁丝午夜福利片| 久久久久久久久久黄片| 97精品久久久久久久久久精品| 日本熟妇午夜| 九色成人免费人妻av| 免费看av在线观看网站| 欧美日韩综合久久久久久| 97在线视频观看| 欧美极品一区二区三区四区| 两个人的视频大全免费| 一夜夜www| 99久久精品一区二区三区| 日本午夜av视频| 少妇人妻精品综合一区二区| 搞女人的毛片| 2018国产大陆天天弄谢| 成人二区视频| 纵有疾风起免费观看全集完整版 | 亚洲四区av| 久久久久国产网址| 国产男人的电影天堂91| 亚洲一区高清亚洲精品| 一级毛片黄色毛片免费观看视频| 亚洲精品国产成人久久av| 欧美高清性xxxxhd video| 国产高潮美女av| 18禁在线无遮挡免费观看视频| 波多野结衣巨乳人妻| 亚洲美女视频黄频| 建设人人有责人人尽责人人享有的 | 亚洲在线自拍视频| 午夜激情久久久久久久| av专区在线播放| 亚洲国产欧美人成| 成人综合一区亚洲| 久久久久久久久久黄片| 国产免费又黄又爽又色| 高清日韩中文字幕在线| 久久久a久久爽久久v久久| 在线免费观看的www视频| 一级av片app| 日韩一本色道免费dvd| 五月天丁香电影| 亚洲精品亚洲一区二区| 禁无遮挡网站| 高清午夜精品一区二区三区| 能在线免费看毛片的网站| 精品国产露脸久久av麻豆 | 免费无遮挡裸体视频| 大片免费播放器 马上看| 三级男女做爰猛烈吃奶摸视频| av国产久精品久网站免费入址| 色网站视频免费| 国产老妇伦熟女老妇高清| 中文天堂在线官网| 婷婷色av中文字幕| 精品一区二区免费观看| 亚洲av成人精品一区久久| 国产精品一区二区三区四区久久| 欧美潮喷喷水| 搡老妇女老女人老熟妇| h日本视频在线播放| 欧美日韩国产mv在线观看视频 | 少妇熟女aⅴ在线视频| 免费观看无遮挡的男女| 夫妻性生交免费视频一级片| 欧美日韩国产mv在线观看视频 | 欧美激情久久久久久爽电影| 精品久久久久久久末码| 一级毛片黄色毛片免费观看视频| 成年人午夜在线观看视频 | 一本一本综合久久| 婷婷色麻豆天堂久久| 啦啦啦啦在线视频资源| 男人舔女人下体高潮全视频| 亚洲激情五月婷婷啪啪| 最近的中文字幕免费完整| 国产精品国产三级专区第一集| 日本黄色片子视频| 精品一区二区免费观看| 午夜精品一区二区三区免费看| 色哟哟·www| 久久精品国产亚洲av涩爱| 久久精品久久精品一区二区三区| 久久久久久久久久久免费av| 男插女下体视频免费在线播放| 国内精品美女久久久久久| 亚洲欧美中文字幕日韩二区| 亚洲精品久久久久久婷婷小说| 干丝袜人妻中文字幕| 少妇丰满av| 国产日韩欧美在线精品| 一级a做视频免费观看| 91精品一卡2卡3卡4卡| 嫩草影院新地址| 全区人妻精品视频| 一级黄片播放器| 日韩伦理黄色片| 成人美女网站在线观看视频| 精品一区在线观看国产| 十八禁网站网址无遮挡 | 日本-黄色视频高清免费观看| 久99久视频精品免费| av在线观看视频网站免费| 久热久热在线精品观看| freevideosex欧美| 欧美丝袜亚洲另类| 国产 一区精品| 久久久久久久国产电影| 伦精品一区二区三区| 亚洲av国产av综合av卡| 欧美区成人在线视频| 日韩欧美精品免费久久| 精品国产一区二区三区久久久樱花 | 日韩一区二区三区影片| 亚洲精品久久久久久婷婷小说| 国产麻豆成人av免费视频| 国产女主播在线喷水免费视频网站 | 青春草视频在线免费观看| 一本—道久久a久久精品蜜桃钙片 精品乱码久久久久久99久播 | 成年人午夜在线观看视频 | 91久久精品国产一区二区成人| 免费av观看视频| 观看美女的网站| 亚洲成色77777| 成人无遮挡网站| 夜夜看夜夜爽夜夜摸| 欧美日韩国产mv在线观看视频 | 99热这里只有精品一区| 最新中文字幕久久久久| 午夜精品国产一区二区电影 | 免费观看av网站的网址| or卡值多少钱| 日韩在线高清观看一区二区三区| 麻豆国产97在线/欧美| 国产免费又黄又爽又色| 亚洲精品色激情综合| 亚洲av在线观看美女高潮| 3wmmmm亚洲av在线观看| 成人二区视频| 26uuu在线亚洲综合色| 久热久热在线精品观看| 国产黄色免费在线视频| 国产高清有码在线观看视频| 国产成人一区二区在线| 久久精品夜夜夜夜夜久久蜜豆| 日韩 亚洲 欧美在线| 身体一侧抽搐| videossex国产| 久久久久免费精品人妻一区二区| 99热网站在线观看| 免费观看精品视频网站| 夫妻午夜视频| 三级国产精品片| 少妇被粗大猛烈的视频| 国产精品久久久久久久久免| 欧美日韩在线观看h| 成年免费大片在线观看| 亚洲av国产av综合av卡| 97精品久久久久久久久久精品| 日韩av不卡免费在线播放| 人妻少妇偷人精品九色| 中文天堂在线官网| 狂野欧美白嫩少妇大欣赏| 午夜福利视频精品| 久久久久久久久久人人人人人人| av在线播放精品| 国产黄片美女视频| 最近手机中文字幕大全| 免费观看av网站的网址| 亚洲四区av| 久久久亚洲精品成人影院| 韩国av在线不卡| av国产免费在线观看| 极品教师在线视频| 精品久久国产蜜桃| 三级男女做爰猛烈吃奶摸视频| 51国产日韩欧美| 精品一区二区免费观看| 少妇的逼水好多| 日韩欧美精品免费久久| 亚洲精品久久久久久婷婷小说| 欧美成人午夜免费资源| 国产成人精品婷婷| 欧美高清成人免费视频www| 久久韩国三级中文字幕| 女人久久www免费人成看片| 亚洲国产精品成人久久小说| 国产精品无大码| 可以在线观看毛片的网站| 丝袜美腿在线中文| 汤姆久久久久久久影院中文字幕 | 一个人看视频在线观看www免费| 91精品伊人久久大香线蕉| 亚洲精品aⅴ在线观看| 女的被弄到高潮叫床怎么办| 国产一区亚洲一区在线观看| 亚洲在久久综合| 国产成人aa在线观看| 日本wwww免费看| 国产伦一二天堂av在线观看| 国产亚洲av嫩草精品影院| 精品人妻视频免费看| 夜夜爽夜夜爽视频| 天天躁日日操中文字幕| 在线观看av片永久免费下载| 国产久久久一区二区三区| 91久久精品国产一区二区三区| 国产精品1区2区在线观看.| 三级毛片av免费| 亚洲精品乱久久久久久| 日韩国内少妇激情av|