• <tr id="yyy80"></tr>
  • <sup id="yyy80"></sup>
  • <tfoot id="yyy80"><noscript id="yyy80"></noscript></tfoot>
  • 99热精品在线国产_美女午夜性视频免费_国产精品国产高清国产av_av欧美777_自拍偷自拍亚洲精品老妇_亚洲熟女精品中文字幕_www日本黄色视频网_国产精品野战在线观看 ?

    Application study on plasma ignition in aeroengine strut–cavity–injector integrated afterburner

    2021-10-31 08:15:38LiFEI費力BingbingZHAO趙兵兵XiongLIU劉雄LimingHE何立明JunDENG鄧俊JianpingLEI雷健平ZichenZHAO趙子晨andZhiyuZHAO趙志宇
    Plasma Science and Technology 2021年10期
    關鍵詞:費力

    Li FEI (費力), Bingbing ZHAO (趙兵兵),?, Xiong LIU (劉雄),Liming HE (何立明), Jun DENG (鄧俊), Jianping LEI (雷健平),Zichen ZHAO (趙子晨) and Zhiyu ZHAO (趙志宇)

    1 Air Force Engineering University, Xi’an 710038, People’s Republic of China

    2 Aviation University of Air Force, Changchun 130022, People’s Republic of China

    Abstract To increase the thrust-weight ratio in next-generation military aeroengines, a new integrated afterburner was designed in this study.The integrated structure of a combined strut–cavity–injector was applied to the afterburner.To improve ignition characteristics in the afterburner,a new method using a plasma jet igniter was developed and optimized for application in the integrated afterburner.The effects of traditional spark igniters and plasma jet igniters on ignition processes and ignition characteristics of afterburners were studied and compared with the proposed design.The experimental results show that the strut–cavity–injector combination can achieve stable combustion,and plasma ignition can improve ignition characteristics.Compared with conventional spark ignition,plasma ignition reduced the ignition delay time by 67 ms.Additionally,the ignition delay time was reduced by increasing the inlet velocity and reducing the excess air coefficient.This investigation provides an effective and feasible method to apply plasma ignition in aeroengine afterburners and has potential engineering applications.

    Keywords: integrated afterburner, aeroengine, plasma ignition, ignition process, ignition characteristics

    1.Introduction

    With the advancement of military aircraft performance requirements, a high thrust-weight ratio is a key component of aeroengine development[1].As an integral part of aeroengines,the afterburner plays a significant role in improving the thrust of the engine.The afterburner can effectively improve maneuverability and widen the flight envelope of military aircraft.Conventional afterburner structures are generally composed of fuel injectors,flame holders,and the augmentor liner,as shown in figure 1 [2].

    However, many problems [3–5] have arisen with conventional afterburners.The structures of the afterburner components are often complex,which increases the weight of the engine and the flow loss of the engine’s main flow.One solution is an integrated structure design[6–8].Concurrently,the development of aeroengine technology and the improvement of aircraft maneuvering performance have led to the flight envelopes of aircraft becoming increasingly wider.The afterburner encounters ignition challenges and has a narrower ignition boundary when the aircraft flies at a low indicated airspeed and high altitude.Commonly used afterburner ignition methods include prechamber ignition [9], hot jet ignition [10] and catalytic ignition[11].However, these traditional ignition methods cannot simultaneously optimize the various factors of structure,weight,reliability,and cost,which limits the ignition performance of the afterburner.Thus,it is essential to explore new ignition methods for improving afterburner ignition performance.

    To solve the aforementioned optimization issues, various integrated structures that combine the functions of multiple components in the afterburner have been developed [12–14].At Michigan State University, Driscollet al[15] studied the effects of cavity size and fuel injection location on the blowout limit of the combustion flame,investigating the basic law of flame combustion.Miaoet al[16–18] performed flow field and ignition experiments of afterburners with different cavity–strut structures and analyzed the influence of different strut angles on flame propagation and flame stabilization.These studies mainly combined several components into the afterburner and simplified the structure of the afterburner to some extent.Further development of integrated design is necessary to reduce the mass of the afterburner and improve the combustion performance.Hence, following the concept of integrated structures, the components of the afterburner were further simplified in this study.

    Researchers have performed significant studies on the structure scheme and flame stabilization of afterburners[19–21].However, less attention has been paid to new ignition technology of afterburners.In recent years, plasma ignition has been singled out due to its many attractive advantages [22–25].Because the generation of plasma is accompanied by heat, active particles, ionic wind, Coulomb force, and Lorentz force, the mechanism of plasma ignition can be characterized by high-temperature, chemical, and jet flame effects [26–29].Plasma generation can improve ignition capacity, widen the ignition boundary, reduce ignition delay time,and achieve reliable ignition at low pressure,lowtemperature, and lean fuel conditions [30–32].

    In this study, a strut–cavity–injector integrated afterburner and a plasma jet igniter were designed.As a new type of ignition technology, plasma ignition was applied to an integrated afterburner for the first time.Experiments were carried out to compare the effects of a plasma jet igniter and a spark igniter on the ignition process and the ignition characteristics of an integrated afterburner.The results provide a basis for the application of plasma ignition in an integrated afterburner.

    2.Experimental system and devices

    2.1.Experimental system

    The experiments in this study were conducted on a grounddirected test rig.The experimental system was comprised of an air supply system, fuel supply system, aeroengine combustor, afterburner, igniter, and measurement system.The total length of the experimental model was 1500 mm.The detailed experimental system is shown in figure 2.

    A fan-shaped test section in the combustion chamber was used to stimulate the high-temperature and low-oxygen gas mixture.Aviation kerosene and oxygen were burned in the combustor, producing a high-enthalpy inflow.The temperature of the vitiated inlet air was measured using B-type thermocouples.A flue gas analyzer was used to measure the oxygen content of the afterburner inlet airflow.The expansion ratio of the expansion section was 1.5.The flame was recorded using a charge coupled device (CCD) camera(FASTCAM Mini WX100) through the observation window which was installed on both sides of the integrated afterburner and fitted with a 50 mm focal-length lens.The ignition process was tested under the operating conditions listed in table 1.

    2.2.Strut–cavity–injector integrated afterburner

    Combining the research of afterburners and the developmental trend of integrated afterburners, the structure of the strut–cavity–injector integrated afterburner designed in this study is shown in figure 3.In these experiments, the strut performs three roles: part support, fuel injection, and flame stabilization.The thickness of the strut is 40 mm with a back angle of inclination of 70° [33, 34].The flame-holding is accomplished by the cavity in conjunction with the strut,which is vertically located upstream of the cavity.Fuel is ignited by a high-enthalpy plasma jet produced from a plasma jet igniter mounted at the trailing edge of the cavity.

    2.3.Plasma jet igniter

    The plasma jet igniter designed in this study is composed of a positive pole,negative pole,swirler,electrode mount,isolated base, and stainless-steel casing, as shown in figure 4.Both positive pole and negative poles are made of tungsten–copper alloy (tungsten 70%; copper 30%) with good electrical conductivity and current ablative resistance.The negative pole rod is mounted on the electrode mount and is fixed by a swirler.The minimum distance between the tip of negative pole and the positive pole is 1 mm with a swirl angle of 30°.The power supply used in the plasma jet igniter is a customized DC plasma ignition driving power supply.The breakdown voltage of the driving supply is 10 kV and the output current adjustment range is 20–40 A.After the power supply is connected, a high potential difference is formed between the negative pole and the positive pole of the igniter and an arc is formed by breaking through the air feedstock at the shortest distance.The arc discharge produces a hightemperature, heating the air feedstock.Because the discharge is generated in a very small, confined space, a high-temperature and high-speed plasma jet will be formed at the outlet of the igniter.In the experiment,voltage and current probes were used to collect the plasma igniter discharge waveform.The voltage probe model used was a P6015A with an attenuation coefficient of 1000.The current probe model was a TCP0030 with an attenuation coefficient of 1.The sampling frequency was 10 MHz.

    Table 1.Experimental conditions for the integrated afterburner.

    2.4.Time sequence

    The experimental time sequence is shown in figure 5 [35].The heated air flow begins at the time of 0 s.At the same time, the kerosene is injected into the combustor.A second later, the plasma jet igniter is switched on as soon as a relatively stable flow is established, and the oscilloscope and CCD camera start simultaneously.The flame generates gradually.One second later, at 2 s, the plasma jet igniter is switched off and the combustion is self-sustaining until the end of the experiment.The entire experiment lasts for approximate 5 s.

    3.Results and discussion

    3.1.Discharge characteristics of the igniter

    Figure 6 shows the voltage and current waveforms of the plasma jet igniter discharge process when the plasma power supply output current wasI=25 A and the feedstock flow rate wasWair=45 l min?1.It can be seen from the waveform that the discharge process of the plasma jet igniter is a periodic process[36,37].The discharge process of the plasma jet igniter can be divided into three stages:breakdown process, arc development process, and energy storage process.

    Figure 1.The structure of a conventional afterburner.

    Figure 2.Experimental system of integrated afterburner plasma ignition.

    Figure 3.The structure of the strut–cavity–injector integrated afterburner.

    Figure 4.The structure of the plasma jet igniter.

    Figure 5.Time sequence of the experiment.

    Figure 6.Voltage and current waveforms of the plasma jet igniter discharge process.

    Figure 7.Voltage and current waveforms of breakdown process.

    Figure 8.Development diagram of discharge arc motion of the plasma jet igniter.

    Figure 9.Voltage and current waveforms of arc development process.

    Figure 10.Voltage and current waveforms of energy storage process.

    (1) Breakdown process

    After the driving power is switched on, the voltage drops abruptly when the breakdown condition is reached.A high potential difference of several kilovolts is formed between the opposing electrodes of the igniter.The narrowest part of the positive pole and negative pole is bridged and an arc is formed.Afterward, the current and voltage begin to attenuate and oscillate to some extent.As can be seen from figure 7, the breakdown process of the plasma igniter discharge occurs rapidly,within a few microseconds

    (1) Arc development process.

    After the plasma jet igniter successfully bridges to form an arc, it will immediately enter the arc maintenance process.Figure 8 shows the development diagram of the discharge arc motion of the plasma jet igniter captured by the CCD camera.The camera has a shooting speed of 8000 frames per second and a resolution of 1280×296.Under the aerodynamic action of the air feedstock, the arc is constantly stretched.Combining the voltage and current waveforms in figure 9,it can be seen that the longer the arc,the higher the voltage.After the arc motion, the current turns to zero and the voltage falls to oscillate at a non-zero value

    (1) Energy storage process.

    After the arc is broken and extinguished, the driving power supply of the plasma jet igniter will enter a process of energy storage.In this stage,the voltage is maintained at about 200 V and the current is 0 V, as shown in figure 10.

    3.2.Ignition process comparison of a plasma jet igniter and spark igniter

    To investigate the influence of the igniter on afterburner characteristics, the comparison of the ignition process of a plasma jet igniter and spark igniter is illustrated in figure 11.The camera has a shooting speed of 2000 frames per second and a resolution of 1280×512.In the experiment, the inlet flow velocity was maintained atV=20 m s?1, the inlet flow temperature wasT=600 K,the output current wasI=30 A, and the excess air coefficient was α=3.In the process of flame establishment, the igniter plays an important role.After the power was switched on, the plasma jet igniter rapidly spouted a high-temperature,high-speed jet, and it was able to continue steadily before the power was switched off.Thus,the fuel was quickly ignited by the plasma jet igniter.However,the spark igniter did not work immediately after it was powered on,and the spark disappeared as soon as it was generated.Within 1 s of the ignition duration,the spark igniter would produce only 3–4 sparks.As a result,fuel was ignited relatively slow.

    In order to quantitatively study the plasma ignition process,the ignition delay time was used to characterize the ignition speed.In this study, two photomultiplier tubes were used to measure the spectral signals of O (777 nm) atoms and CH groups(431.4 nm).The ignition delay time of the afterburner is defined as the time interval between the moment when the O atom signal begins to strengthen and the moment when the CH base signal first reaches its peak, as shown in figure 12.According to the experimental results,the ignition delay time of the plasma jet igniter was 22 ms,and the ignition delay time of the spark igniter was 89 ms.Compared with conventional spark ignition, plasma ignition delay time was reduced by 67 ms.

    Figure 13 demonstrates the brightness comparison between the plasma jet igniter and spark igniter.As shown in the figure, the plasma jet igniter successfully ignited first.After successful ignition, the intensity of the entire combustion chamber stabilized around a certain value,demonstrating that the combustion chamber can have stable combustion.In contrast, the ignition process of the spark igniter was relatively late, and the flame brightness in the combustion chamber decreased between two sparks.This means that the flame was unstable and could go out, which is unreliable for aeroengines.

    Figure 11.Ignition process comparison between the plasma jet igniter and spark igniter.

    Figure 12.Definition of ignition delay time.

    Figure 13.Brightness comparison between the plasma jet igniter and spark igniter.

    The plasma igniter discharge produces an extremely high-temperature jet, which can quickly gasify the fuel during ignition.This causes a rapid rise in the temperature of the combustible mixture and speeds up the combustion chain-branching reaction.Additionally, the plasma igniter can eject the plasma jet with greater speed and stronger penetration than the spark igniter can.The plasma jet increases the contact area with the combustible mixture,accelerating the combustion reaction.The igniter discharge area also generates a large number of active particles (such as N atoms, O atoms, H atoms, and OH radicals), which can improve the chemical reaction rate near the discharge area, accelerating the ignition process and reducing the ignition delay time.

    Analysis of the experimental results reveals that the plasma jet igniter is superior to the traditional spark igniter in terms of ignition speed and ignition reliability.

    3.3.Influence of excess air coefficient (α) on the ignition process

    In the experiment, the inlet flow velocity was maintained atV=20 m s?1,the inlet flow temperature wasT=600 K,the output current wasI=30 A, and the flow rate of the air feedstock wasWair=45 l min?1.The CCD camera, oscilloscope, and photomultiplier were used to record the ignition process images and ignition delay time under the conditions of different excess air coefficients (α=1, 2, 3, 5, 7).Excess air coefficient (α) is defined by the equation:

    whereWais the mass flow rate of the inlet air,Wfis the mass flow rate of the fuel, andL0is the theoretical combustion air demand for the RP-3 aviation kerosene,L0=14.7 kg/kg [38, 39].

    The process of flame kernel generation and flame propagation when the excess air coefficient α=1 and α=3 is shown in figure 14.The camera has a shooting speed of 2000 frames per second and a resolution of 1280×512.The kerosene ejected from the rod first passes through the main recirculation zone behind the strut.Under the action of shear force in the main recirculation zone, the fuel column breaks into small fuel droplets.Some of the fuel droplets vaporize directly under the heating of high-temperature airflow, while some of the unevaporated fuel droplets pass through the main recirculation zone under the action of initial kinetic energy and are sucked into the cavity.The high-temperature jet of the plasma jet igniter ignites the fuel mixture in the cavity quickly and forms a jet flame.

    It can be seen from figure 14 that the flame development process under the two excess air coefficients is completely different.First,in the formation and development stage of the flame kernel, the initial flame kernel is directly generated at the head of the plasma jet when α=1 and the initial flame kernel is generated at the root of the plasma jet when α=3.

    Second, when α=1, the initial flame kernel does not enter the shear layer along the trailing edge of the cavity to form a shear layer flame.Instead, the flame kernel diffuses directly into the main recirculation zone under the action of plasma jet aerodynamic force and mainstream entrainment effect.However,due to the low flow velocity in the boundary layer of the cavity wall, the initial flame kernel first develops along the trailing edge of the cavity and outward from the cavity when α=3.The flame then rushes out of the cavity and ignites the shear layer.At the same time,the flame in the cavity continues to develop.

    Additionally, there are great differences in the formation and stability of the concave cavity pilot flame.When α=1,a vortex flame cannot be formed well in the cavity.The initial flame kernel formed in the cavity cannot be effectively diffused for combustion in the cavity.This is because when the excess air coefficient is small, the fuel supply quantity increases and the fuel outflow kinetic energy increases,which leads to a fuel-rich state inside the cavity.The fuel atomization effect in the cavity is poor and there are even large particles of fuel droplets.The high fuel–gas ratio is not conducive to combustion.Furthermore, there are large areas of shadows in the flame at the head of the recirculation zone.When α=1, excessive kerosene will not fully react in the combustion.Instead,it will evaporate.These shaded areas are low-temperature combustion zones formed by the vaporization of kerosene droplets.When α=3, the flame in the cavity develops better.The gas pressure in the low-speed recirculation zone formed behind the bluff body of the strut is low, which has an entrainment effect on the airflow in the cavity.Additionally,the high-temperature,high-speed plasma jet from the igniter follows the direction of the vortex in the cavity, which strengthens the vortex and enhances the mass and momentum exchange with the mainstream.However, as the excess air coefficient gradually increases and the fuel supply becomes smaller (in addition to the slow ignition process),the self-sustaining flame may not form in the cavity after the plasma jet igniter stops working, causing a failed ignition.

    Figure 15 shows the changes of plasma ignition delay time under different afterburner excess air coefficients.The ignition delay time increases with the increase of the afterburner excess air coefficient.Compared with the case where α=1, ignition delay time of α=2 and α=3 is relatively increased by 12 and 37 ms.Also,when the afterburner excess air coefficient continues to increase to a certain range(α=5 and α=7), the main refluent zone in the afterburner cannot form a stable combustion flame.The excess air coefficient has a great influence on the plasma ignition and combustion process of the afterburner.It mainly affects the atomization quality and the distribution of fuel.Too much or too little excess air will cause local lean fuel or rich fuel,respectively,which will have adverse effects on the generation and expansion of a flame kernel, and will seriously affect the propagation of flame and stable combustion.

    Figure 14.Flame kernel generation and flame propagation process of an integrated afterburner (α=1, 3).

    Figure 15.Change of plasma ignition delay time under different afterburner excess air coefficients.

    Figure 16.Process of flame kernel generation and flame propagation of an integrated afterburner (V=10 m s?1, 30 m s?1).

    Figure 17.The change of plasma ignition delay time under different inlet flow velocities.

    3.4.Influence of inlet velocity (V) on the ignition process

    In order to research the effects on the ignition process of changes in the inlet velocity (V), this experiment was conducted with a linearly increasing inlet velocity from 10 to 40 m s?1.In the experiment, the inlet flow temperature wasT=600 K, the output current wasI=30 A, the flow rate of the air feedstock wasWair=45 l min?1, and the excess air coefficient was α=3.The process of flame kernel generation and flame propagation when the inlet flow velocityV=10 and 30 m s?1is shown in figure 16.

    As shown in figure 16, when the inlet air velocity of an afterburner is small, the ignition process lasts longer.Att=52 ms,there is still no flame kernel near the plasma jet.Att=245 ms, a jet flame of a certain size is formed and the flame kernel starts to enter the shear layer along the back edge of the concave cavity.The main recirculation zone is not fully lit untilt=510 ms.It can also be seen from figure 16 that the vortex flame and shear layer flame in the cavity are not bright and the flame form in the main recirculation zone is not complete.This indicates that the combustion reaction is not violent under these conditions.

    By contrast, the ignition process is significantly shortened when the inlet air velocity isV=30 m s?1.The development process is similar to that when the excess air coefficient is α=1.Both jet flames are formed quickly and directly from the leading edge of the cavity into the main recirculation zone without the formation process of shear layer flame.As shown in figure 16, a jet flame is formed at the end of the plasma jet att=7 ms and the flame expands rapidly.The flame rapidly develops downstream after entering the main recirculation zone.Att=26 ms, the flame reaches the outlet of the afterburner.Then, the flame fills the entire afterburner with stable combustion and bright color.

    When the inlet flow velocity decreases, the strength of the recirculation vortex in the main recirculation zone becomes weaker and the strength of the vortex in the cavity also decreases.The decrease of the aerodynamic shear force is not conducive to fuel crushing and atomization evaporation.Also, the convective exchange between the cavity and main recirculation zone is weakened with the decrease of the incoming flow velocity.This is not conducive to flame propagation.Based on the above analysis, the reduction of inlet velocity of the afterburner is not conducive to combustion chamber ignition.The ignition process is more difficult and the flame expansion speed is slower than that in high-inlet velocity.

    The change of ignition delay time under different inlet air velocities for the afterburner is shown in figure 17.It can be seen from the figure that the ignition delay time decreases with the increase of inlet velocity, especially at low flow velocity.By comparing and analyzing the ignition process and the ignition delay time under different inlet air velocities,it can be concluded that the influence of inlet air velocity on the ignition process mainly includes two aspects.First,the velocity of inlet air can affect the velocity of flame propagation [40].When the inlet velocity increases, the turbidity of the main recirculation zone and the vortex intensity in the cavity will be increased and the convective exchange effect between the cavity and the main recirculation zone will be enhanced.The flame in the cavity is more easily diffused into the main recirculation zone and the fuel–gas mixture in the main recirculation zone will be ignited more quickly.Second, the velocity of inlet air can indirectly affect the atomization and distribution of fuel.When the inlet air velocity increases, the afterburner fuel supply pressure and amount increase correspondingly.The fuel atomization effect becomes better and the flame kernel formation and flame propagation are easier and faster.Moreover, with the increase of inlet velocity, the enhancement of turbulence intensity of the flow field is also conducive to the crushing and atomization of fuel.This enhances the mixing degree of fuel and airflow, improving the uniformity of fuel distribution and facilitating ignition.

    4.Conclusions

    In this study, a strut–cavity–injector structure was designed for the afterburner.Experiments on plasma ignition were carried out in an integrated afterburner.The influences of excess air coefficient and inlet velocity on afterburner characteristics were experimentally investigated in terms of the ignition process and ignition delay time.The main conclusions are as follows.

    (1) The strut–cavity–injector structure integrates the main functional components of the afterburner, which greatly reduces the size of the afterburner.The experimental results show that the combined structure of the strut–cavity–injector can realize stable combustion.

    (2) Compared with conventional spark ignition, when plasma ignition was applied in the cavity,the ignition delay time was reduced by 67 ms.Furthermore, the changing trend of brightness indicated the plasma jet igniter could keep the flame stable after successful ignition.

    (3) The ignition delay time increased with the increase of excess air coefficient in the afterburner.Compared with an α=1 operating condition, the ignition delay time under an α=3 operating condition was increased by 37 ms.When the excess air coefficient continued to increase, at α=5 and α=7, the main recirculation zone of the afterburner could not form a stable combustion flame nor a self-sustained cavity pilot flame.

    (4) The influence of inlet velocity of an afterburner on the ignition process mainly included two aspects.First,the velocity of the inlet airflow affected the flame propagation speed.Second, the velocity of the inlet airflow indirectly affected the atomization quality and distribution of fuel.The ignition delay time then decreased with the increase of the inlet velocity,especially when the inlet velocity was small.Compared withV=10 m s?1operating condition, the ignition delay time underV=40 m s?1operating condition was reduced by 484 ms.

    The experimental results will provide some reference value for the application of plasma ignition technology in the integrated afterburner.

    Acknowledgments

    This work is supported by National Natural Science Foundation of China (Nos.51806245 and 51436008) and the Science and Technology Projects of Shaanxi Province (No.2020JM-349).

    猜你喜歡
    費力
    輕松拉貨不費力:省力三輪拉桿車
    省力與費力
    省力與費力
    中外文摘(2021年4期)2021-11-11 15:09:43
    省力與費力
    華聲文萃(2021年8期)2021-08-25 17:45:23
    省力與費力
    省力與費力
    北方人(2021年2期)2021-04-06 04:20:31
    省力與費力
    省力與費力
    省力與費力
    人生之妙,在于決斷
    中外文摘(2019年23期)2019-11-12 22:48:07
    国产又爽黄色视频| 国产乱人偷精品视频| a 毛片基地| 免费日韩欧美在线观看| 一本久久精品| 亚洲欧美清纯卡通| 咕卡用的链子| 精品少妇内射三级| 国产成人免费无遮挡视频| xxxhd国产人妻xxx| 国产成人免费无遮挡视频| 搡老乐熟女国产| 免费在线观看黄色视频的| 日本色播在线视频| 亚洲欧洲国产日韩| 国产麻豆69| 看非洲黑人一级黄片| 免费人妻精品一区二区三区视频| 国产 一区精品| 欧美bdsm另类| 麻豆乱淫一区二区| 国产成人a∨麻豆精品| 两个人看的免费小视频| 久久久久久久精品精品| 天美传媒精品一区二区| 美女xxoo啪啪120秒动态图| 亚洲情色 制服丝袜| 啦啦啦中文免费视频观看日本| 中文字幕av电影在线播放| 啦啦啦中文免费视频观看日本| 亚洲 欧美一区二区三区| 久久97久久精品| 高清不卡的av网站| 毛片一级片免费看久久久久| av电影中文网址| 亚洲欧美一区二区三区国产| 亚洲三区欧美一区| 18禁观看日本| 亚洲美女搞黄在线观看| 熟妇人妻不卡中文字幕| 99久久精品国产国产毛片| 久久午夜福利片| 午夜91福利影院| 欧美 亚洲 国产 日韩一| 国产精品免费视频内射| 亚洲精品第二区| 蜜桃国产av成人99| 久久久久久人妻| 欧美精品高潮呻吟av久久| 精品一品国产午夜福利视频| 午夜福利乱码中文字幕| 一本一本久久a久久精品综合妖精 国产伦在线观看视频一区 | 在线天堂中文资源库| 国产男女超爽视频在线观看| 国产免费福利视频在线观看| 永久免费av网站大全| 18+在线观看网站| 久久国产精品男人的天堂亚洲| videos熟女内射| 在线观看人妻少妇| 精品人妻在线不人妻| 成人午夜精彩视频在线观看| 久久鲁丝午夜福利片| 91精品三级在线观看| 国产在线免费精品| 黄色一级大片看看| 狠狠婷婷综合久久久久久88av| 一级毛片黄色毛片免费观看视频| 免费观看在线日韩| 欧美激情高清一区二区三区 | 美女脱内裤让男人舔精品视频| 久久久久久久久久人人人人人人| 伦理电影大哥的女人| 亚洲成人av在线免费| 满18在线观看网站| 男人操女人黄网站| 精品一区二区三区四区五区乱码 | 婷婷色av中文字幕| 精品亚洲成a人片在线观看| 国产av一区二区精品久久| www.av在线官网国产| 午夜福利在线观看免费完整高清在| 亚洲精品久久久久久婷婷小说| 日本wwww免费看| 欧美精品av麻豆av| 午夜福利视频精品| 中文字幕精品免费在线观看视频| 欧美日韩av久久| 麻豆精品久久久久久蜜桃| 国产在线一区二区三区精| 午夜福利一区二区在线看| 久久鲁丝午夜福利片| 久久人妻熟女aⅴ| 黄片无遮挡物在线观看| 可以免费在线观看a视频的电影网站 | 免费看不卡的av| 久久精品人人爽人人爽视色| 久久久久久久久久久久大奶| 少妇人妻 视频| 伦理电影免费视频| 精品国产国语对白av| 97精品久久久久久久久久精品| 日韩制服丝袜自拍偷拍| 成人午夜精彩视频在线观看| 亚洲成色77777| 亚洲精品日韩在线中文字幕| 一区二区av电影网| 亚洲欧洲精品一区二区精品久久久 | av.在线天堂| 超色免费av| 一级毛片 在线播放| 久久久久人妻精品一区果冻| 嫩草影院入口| 韩国高清视频一区二区三区| 少妇精品久久久久久久| 国产伦理片在线播放av一区| 国产一区二区三区av在线| 国产极品天堂在线| 日韩不卡一区二区三区视频在线| www.精华液| 精品卡一卡二卡四卡免费| 少妇人妻精品综合一区二区| 亚洲美女搞黄在线观看| 亚洲精华国产精华液的使用体验| 熟女电影av网| 91aial.com中文字幕在线观看| 亚洲成国产人片在线观看| 我的亚洲天堂| 9热在线视频观看99| 18禁动态无遮挡网站| 久久国产精品男人的天堂亚洲| 亚洲中文av在线| 日韩av在线免费看完整版不卡| 亚洲国产av影院在线观看| 国产成人精品婷婷| 毛片一级片免费看久久久久| 一二三四在线观看免费中文在| 亚洲少妇的诱惑av| 国产探花极品一区二区| 男女边摸边吃奶| 女人精品久久久久毛片| xxxhd国产人妻xxx| 亚洲欧美精品综合一区二区三区 | 色94色欧美一区二区| 国产成人精品无人区| 只有这里有精品99| av免费在线看不卡| 午夜免费鲁丝| 欧美日韩av久久| 午夜精品国产一区二区电影| 一区福利在线观看| 免费高清在线观看日韩| 香蕉国产在线看| 18禁裸乳无遮挡动漫免费视频| 国产亚洲最大av| 亚洲国产欧美网| 黄网站色视频无遮挡免费观看| 欧美在线黄色| 女性生殖器流出的白浆| 午夜福利网站1000一区二区三区| 国产精品无大码| 少妇人妻久久综合中文| 美女xxoo啪啪120秒动态图| 99久国产av精品国产电影| 婷婷色av中文字幕| 国产免费又黄又爽又色| 亚洲国产日韩一区二区| 一级,二级,三级黄色视频| 日韩一卡2卡3卡4卡2021年| 男女高潮啪啪啪动态图| 丝袜美足系列| 一二三四在线观看免费中文在| 国产亚洲精品第一综合不卡| 亚洲欧美成人精品一区二区| 在线看a的网站| 欧美bdsm另类| 一边亲一边摸免费视频| 午夜福利视频精品| 亚洲三区欧美一区| 欧美在线黄色| 久久久久久久久久人人人人人人| av在线观看视频网站免费| 亚洲精品乱久久久久久| 黄色怎么调成土黄色| 亚洲精品成人av观看孕妇| 亚洲欧美色中文字幕在线| 国产伦理片在线播放av一区| 久久久久久久久久人人人人人人| 久久精品久久久久久噜噜老黄| av又黄又爽大尺度在线免费看| 美女xxoo啪啪120秒动态图| 久久久久网色| 国产乱人偷精品视频| 国产在线免费精品| 亚洲av中文av极速乱| 久久久久久伊人网av| 久久97久久精品| 在线免费观看不下载黄p国产| 飞空精品影院首页| 久久精品aⅴ一区二区三区四区 | 欧美激情 高清一区二区三区| 另类亚洲欧美激情| 女性生殖器流出的白浆| 2022亚洲国产成人精品| 又粗又硬又长又爽又黄的视频| 美国免费a级毛片| 男人舔女人的私密视频| 欧美黄色片欧美黄色片| 伊人亚洲综合成人网| 日日撸夜夜添| 亚洲,一卡二卡三卡| 最近的中文字幕免费完整| 一级爰片在线观看| 亚洲av电影在线进入| 亚洲av国产av综合av卡| 十分钟在线观看高清视频www| 日日爽夜夜爽网站| 久久人人爽人人片av| 国产日韩欧美在线精品| 黑丝袜美女国产一区| 亚洲天堂av无毛| 国产高清国产精品国产三级| 免费日韩欧美在线观看| 亚洲伊人色综图| 亚洲欧美成人精品一区二区| 亚洲欧美精品自产自拍| 久久这里只有精品19| 啦啦啦中文免费视频观看日本| 国产精品国产三级国产专区5o| 成人毛片a级毛片在线播放| 亚洲熟女精品中文字幕| 久久影院123| 一级a爱视频在线免费观看| 男人添女人高潮全过程视频| 欧美激情高清一区二区三区 | 波多野结衣一区麻豆| 青青草视频在线视频观看| 少妇熟女欧美另类| 青春草视频在线免费观看| 美女脱内裤让男人舔精品视频| 美女主播在线视频| 在线观看美女被高潮喷水网站| 精品少妇一区二区三区视频日本电影 | 久久久久视频综合| 好男人视频免费观看在线| 高清在线视频一区二区三区| 免费高清在线观看日韩| 韩国av在线不卡| 免费女性裸体啪啪无遮挡网站| 久久ye,这里只有精品| 精品少妇久久久久久888优播| 国产精品熟女久久久久浪| 涩涩av久久男人的天堂| 制服丝袜香蕉在线| 多毛熟女@视频| 97精品久久久久久久久久精品| 亚洲精品一二三| 日产精品乱码卡一卡2卡三| 卡戴珊不雅视频在线播放| 亚洲伊人色综图| 亚洲激情五月婷婷啪啪| 天堂8中文在线网| 免费黄网站久久成人精品| 亚洲视频免费观看视频| 99香蕉大伊视频| 在线观看免费高清a一片| 激情视频va一区二区三区| 女性生殖器流出的白浆| 丰满迷人的少妇在线观看| 国产亚洲精品第一综合不卡| 国产熟女午夜一区二区三区| 丝袜脚勾引网站| 亚洲经典国产精华液单| 黑人欧美特级aaaaaa片| 免费黄频网站在线观看国产| 免费观看a级毛片全部| 热99国产精品久久久久久7| 久久久久国产网址| 熟女少妇亚洲综合色aaa.| 亚洲av综合色区一区| 男女下面插进去视频免费观看| 久久国产亚洲av麻豆专区| 热99久久久久精品小说推荐| av免费在线看不卡| 中文字幕亚洲精品专区| 欧美亚洲 丝袜 人妻 在线| 国产精品久久久久成人av| 久久鲁丝午夜福利片| 一边亲一边摸免费视频| 国产野战对白在线观看| 最新中文字幕久久久久| 婷婷色av中文字幕| 亚洲av中文av极速乱| 又黄又粗又硬又大视频| 在线精品无人区一区二区三| www.熟女人妻精品国产| 久久国产精品男人的天堂亚洲| 中文欧美无线码| 亚洲国产精品成人久久小说| 精品国产乱码久久久久久男人| 免费观看性生交大片5| 蜜桃在线观看..| 精品午夜福利在线看| 日韩制服丝袜自拍偷拍| 两性夫妻黄色片| www日本在线高清视频| 国产免费现黄频在线看| 天堂8中文在线网| 精品一品国产午夜福利视频| 一级毛片 在线播放| 女的被弄到高潮叫床怎么办| 久久99蜜桃精品久久| 欧美日韩av久久| 最近中文字幕2019免费版| 看免费av毛片| 人人妻人人爽人人添夜夜欢视频| 男女高潮啪啪啪动态图| 亚洲国产毛片av蜜桃av| 99热网站在线观看| 日韩制服丝袜自拍偷拍| 视频区图区小说| 国产无遮挡羞羞视频在线观看| 久久久亚洲精品成人影院| 一本大道久久a久久精品| 国产精品.久久久| 天美传媒精品一区二区| 尾随美女入室| 男女国产视频网站| 在线观看免费视频网站a站| 国产一区亚洲一区在线观看| 久久精品国产a三级三级三级| 哪个播放器可以免费观看大片| 久久人人爽人人片av| 亚洲一码二码三码区别大吗| 免费在线观看视频国产中文字幕亚洲 | 国产成人精品在线电影| 啦啦啦在线免费观看视频4| 国产精品二区激情视频| 国产视频首页在线观看| 午夜福利一区二区在线看| 亚洲一级一片aⅴ在线观看| 黑人巨大精品欧美一区二区蜜桃| 69精品国产乱码久久久| 久热久热在线精品观看| 亚洲熟女精品中文字幕| 亚洲精品中文字幕在线视频| 日本av免费视频播放| 欧美成人午夜精品| 婷婷色麻豆天堂久久| a 毛片基地| 久久精品国产亚洲av高清一级| 大片免费播放器 马上看| 亚洲第一青青草原| 亚洲欧洲国产日韩| 精品久久久久久电影网| 欧美人与性动交α欧美精品济南到 | 黄片小视频在线播放| 亚洲精品视频女| 久久精品国产自在天天线| 我的亚洲天堂| 飞空精品影院首页| 99精国产麻豆久久婷婷| 大陆偷拍与自拍| av有码第一页| 一区二区av电影网| 啦啦啦在线免费观看视频4| videos熟女内射| 电影成人av| 国产视频首页在线观看| 国产精品蜜桃在线观看| 黑丝袜美女国产一区| 777米奇影视久久| 国产日韩欧美视频二区| 国产在线免费精品| 大码成人一级视频| 一级a爱视频在线免费观看| 伦精品一区二区三区| 一本—道久久a久久精品蜜桃钙片| av在线app专区| 国产麻豆69| 九九爱精品视频在线观看| 中文字幕人妻熟女乱码| 熟妇人妻不卡中文字幕| 精品一区二区三区四区五区乱码 | 国产精品 欧美亚洲| 精品视频人人做人人爽| 欧美国产精品一级二级三级| 欧美 日韩 精品 国产| 亚洲经典国产精华液单| 国产精品二区激情视频| 国产一区二区三区av在线| 搡老乐熟女国产| a级毛片黄视频| 亚洲欧美成人精品一区二区| 亚洲精品视频女| 2018国产大陆天天弄谢| 久久久久久免费高清国产稀缺| 美女高潮到喷水免费观看| 国产亚洲欧美精品永久| 精品国产超薄肉色丝袜足j| 国产白丝娇喘喷水9色精品| 少妇的丰满在线观看| 中文乱码字字幕精品一区二区三区| 欧美精品高潮呻吟av久久| 天天操日日干夜夜撸| 日韩成人av中文字幕在线观看| 韩国av在线不卡| 亚洲av电影在线进入| 美女主播在线视频| 韩国av在线不卡| 日本av免费视频播放| 亚洲五月色婷婷综合| 欧美xxⅹ黑人| av不卡在线播放| 国产成人精品无人区| 国产精品免费视频内射| 亚洲精品久久久久久婷婷小说| 人妻系列 视频| 在线观看免费日韩欧美大片| 欧美日韩亚洲高清精品| 免费在线观看黄色视频的| 黑人巨大精品欧美一区二区蜜桃| 日韩中文字幕视频在线看片| 日韩欧美一区视频在线观看| 啦啦啦在线观看免费高清www| 成年av动漫网址| 亚洲激情五月婷婷啪啪| videossex国产| 中文字幕人妻丝袜一区二区 | 男女免费视频国产| 久久久国产一区二区| 亚洲精品国产av蜜桃| 日韩不卡一区二区三区视频在线| 国产一区有黄有色的免费视频| 有码 亚洲区| 国产不卡av网站在线观看| 久久人人爽av亚洲精品天堂| 国产精品.久久久| 日韩免费高清中文字幕av| 久久精品国产亚洲av高清一级| 久久久久国产精品人妻一区二区| 亚洲美女黄色视频免费看| 女的被弄到高潮叫床怎么办| 18禁裸乳无遮挡动漫免费视频| 日日啪夜夜爽| 成人国产麻豆网| 丰满饥渴人妻一区二区三| 色网站视频免费| 男女高潮啪啪啪动态图| 国产又爽黄色视频| 青草久久国产| 欧美 亚洲 国产 日韩一| 国产成人精品福利久久| 美女国产视频在线观看| 亚洲欧美清纯卡通| 日本-黄色视频高清免费观看| 亚洲国产精品成人久久小说| 大码成人一级视频| 亚洲第一av免费看| 国产人伦9x9x在线观看 | 久久久精品94久久精品| 久久国内精品自在自线图片| 亚洲精品国产av蜜桃| 这个男人来自地球电影免费观看 | 国产精品一区二区在线不卡| 日本欧美视频一区| 精品一区二区免费观看| 亚洲三区欧美一区| 男女啪啪激烈高潮av片| 日本欧美国产在线视频| 久久久久久久久久人人人人人人| 久久韩国三级中文字幕| 在线天堂中文资源库| 啦啦啦在线免费观看视频4| 不卡视频在线观看欧美| 黑人欧美特级aaaaaa片| 国产男女超爽视频在线观看| 亚洲欧美一区二区三区国产| 日韩伦理黄色片| 国产日韩欧美在线精品| 天堂8中文在线网| 大陆偷拍与自拍| 日韩 亚洲 欧美在线| 亚洲美女黄色视频免费看| 极品少妇高潮喷水抽搐| 国产人伦9x9x在线观看 | 国产精品熟女久久久久浪| 汤姆久久久久久久影院中文字幕| 久久久久久久国产电影| 亚洲av男天堂| 日韩制服丝袜自拍偷拍| 国产国语露脸激情在线看| 啦啦啦啦在线视频资源| av在线观看视频网站免费| 在线免费观看不下载黄p国产| 男的添女的下面高潮视频| 亚洲国产精品成人久久小说| 亚洲av日韩在线播放| 王馨瑶露胸无遮挡在线观看| 欧美在线黄色| 日韩三级伦理在线观看| av在线老鸭窝| 十分钟在线观看高清视频www| 在线观看人妻少妇| 十分钟在线观看高清视频www| 久久精品国产鲁丝片午夜精品| 亚洲国产av影院在线观看| 欧美成人午夜免费资源| 极品人妻少妇av视频| 如何舔出高潮| 午夜av观看不卡| 99热全是精品| 母亲3免费完整高清在线观看 | 新久久久久国产一级毛片| 色吧在线观看| 精品亚洲成国产av| 免费大片黄手机在线观看| 免费在线观看黄色视频的| 国产精品久久久久久久久免| 日产精品乱码卡一卡2卡三| 国产精品国产三级国产专区5o| 亚洲精品视频女| 人妻系列 视频| 欧美日韩视频精品一区| 999精品在线视频| 欧美人与性动交α欧美精品济南到 | 亚洲精品中文字幕在线视频| 亚洲国产欧美在线一区| 欧美+日韩+精品| av电影中文网址| 大香蕉久久成人网| 精品人妻一区二区三区麻豆| 丰满迷人的少妇在线观看| 在线天堂最新版资源| 一边摸一边做爽爽视频免费| 亚洲av男天堂| 宅男免费午夜| 夜夜骑夜夜射夜夜干| 国产极品天堂在线| 乱人伦中国视频| 久久久久人妻精品一区果冻| 久久国产精品大桥未久av| 久久人人爽人人片av| 国产成人免费观看mmmm| 宅男免费午夜| 欧美 亚洲 国产 日韩一| 一区在线观看完整版| 亚洲第一av免费看| 中文字幕av电影在线播放| 一级片免费观看大全| 精品99又大又爽又粗少妇毛片| 亚洲精品国产一区二区精华液| 伦理电影大哥的女人| 久久久久网色| 一区在线观看完整版| 国产精品香港三级国产av潘金莲 | 青春草亚洲视频在线观看| 老司机影院毛片| 黄网站色视频无遮挡免费观看| 久久久久久伊人网av| 人人妻人人爽人人添夜夜欢视频| 女性被躁到高潮视频| 国产欧美日韩综合在线一区二区| 一区二区日韩欧美中文字幕| av国产精品久久久久影院| 母亲3免费完整高清在线观看 | 国产精品无大码| 午夜影院在线不卡| xxxhd国产人妻xxx| 国产成人精品久久二区二区91 | 波多野结衣av一区二区av| 天美传媒精品一区二区| 久久久久久久久久久久大奶| 韩国精品一区二区三区| 久久热在线av| 免费观看av网站的网址| 999精品在线视频| 亚洲欧洲日产国产| 人体艺术视频欧美日本| 国产精品久久久久久久久免| 97在线视频观看| 老司机影院毛片| 国产无遮挡羞羞视频在线观看| 高清av免费在线| 国产高清不卡午夜福利| 国产亚洲一区二区精品| 一边亲一边摸免费视频| 黑丝袜美女国产一区| 999精品在线视频| 一级片'在线观看视频| 欧美激情极品国产一区二区三区| 一级黄片播放器| 中国三级夫妇交换| 深夜精品福利| 国产免费一区二区三区四区乱码| 亚洲精品aⅴ在线观看| 国产日韩欧美视频二区| 久久av网站| 波多野结衣一区麻豆| 国产亚洲精品第一综合不卡| 国产男女内射视频| 国产伦理片在线播放av一区| 啦啦啦视频在线资源免费观看| 免费观看av网站的网址| 丰满饥渴人妻一区二区三| 一区二区av电影网| 久久婷婷青草| 久久青草综合色| 久久久国产精品麻豆| 国产 精品1| 亚洲av国产av综合av卡| 免费黄网站久久成人精品| 免费不卡的大黄色大毛片视频在线观看| 久久婷婷青草| 久久国产亚洲av麻豆专区|