內燃機與配件
設計研究
- 純電動汽車坡道起步防溜系統及控制策略的研究 Research on the Anti-Slip System and Anti-Slip Control Strategy of Pure Elect
- 氣缸套網格狀激光淬火機床設計 Design of Grid Laser Quenching Machine Tool for Cylinder Liner
- Arduino在汽車CAN通訊中的應用研究 Research on the Application of Arduino in Automobile CAN Communication
- 內燃機零部件結構設計及應用研究 Structural Design and Application Study of Internal Combustion Engine Components
- 汽車智能熄燈保護系統的開發 Development of Intelligent Lights-off Protection System for Automobile
- 基于Workbench的炭罐電磁閥流量特性分析與優化 Analysis and Optimization of Canister Purge Valve Flow Characteristics Based on Workbench
- 不同針閥頭型對噴油嘴性能的仿真研究 Nozzle Flow Simulation for Different Needle Type
- 履帶車輛雙電機耦合驅動機構設計研究 Design and Research of Dual-motor Coupling Drive Mechanism for Tracked Vehicles
工藝技術
- 銑削加工工藝參數優化研究 Research on Optimization of Milling Process Parameters
- 論發動機動力單元裝配工藝的重要性 On the Importance of Assembly Process of Engine Power Unit
- 一種車用空壓機半自動化裝配線的設計應用 Design and Application of Semi-automatic Assembly Line of Air Compressor
- 內燃機活塞環表面處理技術研究 Research on Surface Treatment Technology of Piston Ring of Internal Combustion Engine
- 壓鉚螺母強度及疲勞壽命試驗研究 Experimental Research on Strength and Fatigue Life of Self-Riveting Nuts
- 紙盒式干式噴房下的風平衡探索與實踐 Exploration and Practice of Wind Balance under Carton Dry Spray Booth
- 渦電流分選在報廢汽車中的應用研究 Research on the Application of Eddy Current Separation in End-of-life Vehicles
- 航空用TA18高強鈦合金管材彎曲成形技術及研究進展 The Bending Technology and Research Progress of TA18 High-strength Titanium Pipe for Aviation
產品分析
- 路面加速加載設備轉向系統研究 Research on Steering System for Pavement Accelerated Loading Equipment
- 渦輪增壓器葉輪軸心孔斷裂故障分析及改善 Failure Analysis and Improvement of the Fracture of the Inner Hole of the Turbocharger Impeller
- 基于高速轉臺下的發動機壓力測量系統分析 Analysis of Engine Pressure Measurement System Based on High Speed Turntable
- 試析船舶低速柴油機余熱綜合回收系統 Analysis of the Comprehensive Residual Heat Recovery System of Ship Low-speed Diesel Engine
- 淺析發動機動力升級技術 Analysis on the Engine Power Upgrading Technology
- 內燃機高壓油管供噴平衡的動力分析 Dynamic Analysis of the Balance of High Pressure Fuel Pipe Supply and Injection for Internal Combustion Engines
- 關于某車型轉向開關自動回位問題的分析與研究 Analysis and Research on the Problem of Automatic Return of Steering Switch of a Vehicle Type
- 汽油機渦輪增壓器壓氣機內流場分析和優化措施 Flow Field Analysis and Optimization Measures in Turbocharger Compressor of Gasoline Engine
- 電控式AMT脫擋機理分析與預防 Analysis and Prevention of the Mechanism of Electronically Controlled AMT Shifting
- 汽車翼子板抗凹剛度有限元分析 Finite Element Analysis of the Concave Stiffness of Automobile Fender
- 履帶式電動拖拉機動力學分析與整機建模 Dynamic Analysis and Modeling of Tracked Electric Tractor
裝備技術
- 基于NX/Post的五軸數控機床后置處理器研究與開發實踐 Research and Development Practice of Post Processor of Five Axis NC Machine Tool Based on NX/Post
- 基于物聯網的數控機床裝配物料配送體系研究 Research on NC Machine Tool Assembly Material Distribution System Based on IOT
- 基于機械模具數控加工制造技術及應用分析 NC Machining and Manufacturing Technology Based on Mechanical Die and Its Application Analysis
- 關于航天薄壁框架類零件數控加工變形抑制方法的研究 Research on the Suppression of Thin-wall Frame Parts
- 轉子導條滾壓漲緊壓力計算 Calculation of Rolling Tension Pressure of Rotor-bar
- 數控技術在汽車底盤生產中的應用研究 Research on Application of Numerical Control Technology in Automobile Chassis Production
- 高空作業車工作平臺速度處理對策研究 Study on Speed Treatment Countermeasures of Working Platform of Aerial Work Vehicle
- 內燃機車電氣控制系統的實踐研究 Practical Study on Electric Control System of Internal Combustion Locomotive
- 液壓傳動技術在汽車中的應用及發展趨勢 Application and Development Trend of Hydraulic Transmission Technology in Automobile
- 數控車床自動上下料機械手結構設計 Structural Design of CNC Lathe
- CAD技術與機械制圖關鍵技術分析 Analysis of CAD Technology and Key Technology of Mechanical Drawing
制造工藝
- 鑄造工藝對機械軸承座性能的影響探析 Influence of Casting Process on Mechanical Bearing Housing
- 某型號柴油機曲軸中心孔修正工藝研究及驗證 Research and Verification on Correction Technology of Crankshaft Center Hole of a Diesel Engine
- 機械加工工藝對汽車零部件精度的影響分析 Analysis of Influence of Machining Technology on Precision of Auto Parts
- 90°外圓車刀的刃磨技巧及應用研究 Research on Grinding Technique and Application of 90° Cylindrical Turning Tool
- 基于方向盤注塑模在UG中設計與制造的應用研究 Design of CNC Machine Tool Automatic Production System Based on Cloud Manufacturing
- 發動機氣缸蓋數控加工工藝研究 Research on NC Machining Technology of Engine Cylinder Head
- 汽車發動機曲軸機械加工技術分析 Analysis of Automobile Engine Crankshaft Machining Technology
- 16缸曲軸中頻感應淬火變形的系統解決方案 System Solution of Medium Frequency Induction Hardening Deformation of 16 Cylinder Crankshaft
質量與檢修
- 共軌柴油機限壓閥打開故障的研究與分析 Research and Analysis of Pressure Limiting Valve Opening Fault of Common Rail Diesel Engine
- 工程機械液壓系統的現場故障診斷與維修技術研究 Research on On-site Fault Diagnosis and Maintenance Technology of Construction Machinery Hydraulic System
- 現代汽車維修中電子診斷技術的運用分析 Analysis of the Application of Electronic Diagnosis Technology in Modern Automobile Maintenance
- 鈑金焊接成型的常見問題及其焊接質量控制 Common Problems of Sheet Metal Welding Forming and Its Welding Quality Control
- 新能源汽車維修與故障診斷技術探究 Research on New Energy Vehicle Maintenance and Fault Diagnosis Technology
- 比亞迪e5純電動車無法上電故障診斷與排除 Fault Diagnosis and Troubleshooting of BYD E5 Pure Electric Vehicle Unable to Power on
- 汽車空調制冷系統常見故障分析及診斷方法研究 Research on Common Failure Analysis and Diagnosis Method of Automobile Air-conditioning Refrigeration System
- 數控機床的故障診斷及消除措施 Fault Diagnosis and Elimination Measures of CNC Machine Tools
- 汽車維修中常見問題與優化措施探討 Discussion on Common Problems and Optimization Measures in Automobile Maintenance
- 航空發動機渦輪葉片故障診斷分析方法 Analysis Method of Fault Diagnosis of Turbine Blades for Aero Engines
- 電子診斷在現代化汽車維修技術中的應用研究 Application of Electronic Diagnosis in Modern Automobile Maintenance Technology
- 燃氣輪機氣路故障診斷技術探討 Discussion on Fault Diagnosis Technology of Gas Turbine Gas Circuit
- 數據融合下的異步電動機故障診斷 Fault Diagnosis of Asynchronous Motor Based on Data Fusion
- 新能源汽車電氣設備的檢修研究 Research on Maintenance of Electrical Equipment of New Energy Vehicles
- 航空發動機試車現場振動測量的干擾與排除 Interference and Elimination of On-site Vibration Measurement for Aeroengine Test Run
- 汽車底盤構造與維修保養淺析 Analysis on the Structure and Maintenance of Automobile Chassis
- 汽車發動機冷卻系統故障檢測與維修 Fault Detection and Maintenance of Automobile Engine Cooling System
- 新能源汽車常見故障診斷及維修技術分析 Common Fault Diagnosis and Maintenance Technology Analysis of New Energy Vehicles
- A320大翼油箱燃油溢出原因分析 Cause Analysis of Fuel Overflow of A320s Fuel Tank
- 探究客車采暖散熱器防腐蝕防雜物問題的應對策略 Exploring the Countermeasures for the Problem of Anti-corrosion and Anti-wandering of Heating Radiators in Passenger Cars
- 汽車發動機檢測技術的運用研究 Research on Application of Automobile Engine Detection Technology
- G1000 NXI系統警告信息排故方法研究 Research on Troubleshooting Method of Warning Information in G1000 NXI System
- 某國六車型發動機故障燈亮問題分析與處理 Analysis and Solution of CN-6 Vehicles Engine Fault Light
- 反應堆用應急柴油發電機組冷卻水系統故障原因分析及處理 Cause Analysis and Treatment of Failure of Cooling Water System of Emergency Diesel Generator Set for Reactor
- 汽車電器系統故障診斷對策及維修方法探討 Discussion on Fault Diagnosis Countermeasures and Maintenance Method of Automobile Electrical Appliance System
- 汽車發動機常見故障分析及起動困難研究 Analysis of Common Faults of Automobile Engine and Research on Starting Difficulty
- 汽車冷卻系統的保養與維護 Maintenance of Automotive Cooling System
- 汽車發動機缸體和缸蓋的清洗技術討論和管理維護 Automobile Engine Cylinder Block and Cylinder Head Cleaning Technology Discussion and Management Maintenance
- 飛機發動機維修過程中的靜電防護分析 Analysis of Electrostatic Protection in Aircraft Engine Maintenance
- 工程機械液壓傳動原理、故障診斷與排除 Principle, Fault Diagnosis and Troubleshooting of Hydraulic Transmission of Construction Machinery
- 柴油機水泵常見故障及處理 Common Fault and Treatment of Diesel Engine Water Pump
企業管理
- 綠色理念在機械設計制造中的滲透分析 Permeation Analysis of Green Concept in Mechanical Design and Manufacture
- 機械制造加工設備的安全管理與維修 Safety Management and Maintenance of Mechanical Manufacturing and Processing Equipment
- 電動汽車技術原理及發展展望 Technical Principles and Development Prospects of Electric Vehicles
- 現代化機械設計制造工藝及精密加工技術分析 Analysis of Modern Machinery Design and Manufacturing Technology and Precision Processing Technology
- 基于增程式電動汽車發展現狀及趨勢研究 Research on Development Status and Trend of Electric Vehicle Based on Incremental Programming
- 信息時代下高職院校智能網聯汽車技術專業發展分析 Analysis on the Professional Development of Intelligent Networked Automobile Technology in Higher Vocational Colleges in the Information Era
- 機械設備管理信息化建設探析 Discussion on Information Construction of Mechanical Equipment Management
- 電動汽車充電樁電能計量中的問題分析 Analysis on Problems in Electric Energy Measurement of Electric Vehicle Charging Pile
- 芻議數據分析在發動機裝配線產能提升中的應用 Discussion on the Application of Data Analysis in the Increase of Engine Assembly Line Capacity
- 基于冶金設備管理與維修技術的要點分析 Analysis of Key Points Based on Metallurgical Equipment Management and Maintenance Technology
- 關于提高機械設計制造及其自動化的有效途徑探討 Discussion on Effective Ways to Improve Mechanical Design, Manufacturing and Automation under the Background of the New Era
- 船舶柴油發動機的維護現存問題及完善對策 Existing Problems and Improvement Countermeasures of Marine Diesel Engine Maintenance
- 機械制造中自動化技術的應用探究 Research on the Application of Automation Technology in Machinery Manafacturing
- 基于重型柴油貨車排放治理的探討 Discussion on Emission Control of Heavy Diesel Truck
- 基于新環境下汽車維修的改進思想與策略探索 Exploration on Improvement Ideas and Strategies of Automobile Maintenance Based on the New Environment
- 數控加工技術在機械加工制造中的應用 Application of CNC Machining Technology in Mechanical Manufacturing
- 機電一體化工程技術的應用及發展趨勢分析 Analysis on the Application and Development Trend of Mechatronics Engineering Technology
- 造船精度管理關鍵問題及對策 Key Problems and Strategies of Shipbuilding Precision Management
- 汽車零配件制造用機械保養分析 Analysis of Mechanical Maintenance for Auto Parts Manufacturing
- 模具工程的智能化發展探究 Research on Intelligent Development of Die and Mould Engineering
技術創新與應用
- 傳感器在汽車電子控制系統中的應用 Application of Sensor in Automotive Electronic Control System
- 機器人裝配作業軌跡規劃研究 Research on Trajectory Planning of Robot Assembly Operation
- 綠色設計法在機械設計制造中的應用 Application of Green Design Method in Mechanical Design and Manufacture
- 基于CATIA DMU的玻璃升降系統運動仿真與設計優化 Motion Simulation and Optimization of Glass Lifting System Based on CATIA DMU
- 動力電池總成裝調平臺的單體電池均衡性測試 Single Battery Balance Test for Power Battery Assembly Installation Platform
- 基于三菱FX3U PLC切線機控制系統設計 Design of Cutting Machine Control System Based on Mitsubishi FX3U PLC
- PLC技術在機電自動化控制中的應用探究 Application of PLC Technology in Electromechanical Automation Control
- 淺析電子控制制動系統在掛車上的應用 Application and Research of Electronic Control Braking System on Trailer
- 新能源汽車動力蓄電池梯次利用的相關探討 Discussion on Echelon Utilization of Power Batteries of New Energy Vehicles
- 改進的螢火蟲算法在雙缸同步控制系統中的應用 Application of Improved Firefly Algorithm in Double Cylinder Synchronous Control System
- 基于油電混合動力技術在無人機中的應用 Application of Hybrid Electric Technology in UAV
綜合
- 1+X證書制度下汽車運用與維修技術專業實訓資源建設路徑 Construction Path of Training Resources for Automobile Application and Maintenance Technology Specialty under 1+X Certificate System
- 基于混合教學法的汽車電氣課程教學改革探究 Research on Teaching Reform of Automobile Electrical Course Based on Mixed Teaching Method
- 項目教學法在工程訓練數控銑床實踐教學中的探索 Exploration of the Project Teaching Method in the Engineering Training Practice Teaching of CNC Milling Machine
- “六步法”在工作過程一體化課程中的應用 Application of the "Six-step Method" in the Integrated Work Process Course
- 汽車運用與維修專業現代學徒制崗位職業能力探析 An Analysis of Vocational Ability of Modern Apprenticeship in Automobile Application and Maintenance
- 汽車檢修實訓臺架與教學任務匹配研究 Study on Matching of Automobile Maintenance Training Platform and Teaching Task
- 探析機械零件數控車削加工理實一體化課程開發 Development of the Integrated Course of NC Turning of Mechanical Parts
- 船舶輪機系統虛擬仿真實驗平臺建設 Construction of Virtual Simulation Experiment Platform for Marine Engineering System
- 《工業機器人操作與編程》項目化教學設計 Project Teaching Design of Industrial Robot Operation and Programming
- VR在“1+X”工業機器人操作與運維培訓中的應用 Application of VR in Operation and Maintenance Training of "1+X" Industrial Robot